Anyone know what I need to do to get the FXO port on the SPA 3000 to forward calls to Asterisk? My Asterisk is running on port 5061 and I set the dial plan on the device to forward to s@asteriskip:5061 but Asterisk is not picking it up. I can see on tcpdump traces that the Invite packets do go to through to the asterisk machine on port 5061, but it's not picking them up. sip debug does not show any packets either.
Hello, I want to use an asterisk device as a load balancer. The idea is to create a dialplan that would balance the incoming calls between X different asterisk boxes (who will then handle the real job). The most basic solution would be to do round-robin, the most elegant would be to check for CPU load and route to the less-charges device. Of course, if it could even detect a dead device and stop sending to it, that would be wonderfull. Has anyone tried to implement that ? Thank you. Yves
> I can see on tcpdump traces that the Invite packets > do go to through to the asterisk machine on port 5061, > but it's not picking them up. sip debug does not show > any packets either.That would imply that the Sipura config is fine, but your Asterisk setup is not listening at the right interface, IP or port. If the extension was invalid or there was an authentication issue, Asterisk should send a reply message not just ignore it... --Luki
There is a better way. Upgrade to the latest 3.1.3a firmware, which supports PSTN to VoIP gateway calls. Specifically the "Off hook while calling VoIP" option needs to be no. If you need help configuring it, use the SPA3K w/Asterisk configurator at Voxilla http://voxilla.com/spa3kasterisk.php is adequate. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Rich Adamson Sent: Thursday, June 16, 2005 4:42 PM To: Adrian A; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Sipura 3000 help> Anyone know what I need to do to get the FXO port on the SPA 3000 to > forward calls to Asterisk? My Asterisk is running on port 5061 and I > set the dial plan on the device to forward to s@asteriskip:5061 but > Asterisk is not picking it up. I can see on tcpdump traces that the > Invite packets do go to through to the asterisk machine on port 5061, > but it's not picking them up. sip debug does not show any packets > either.Take a look at this: http://lists.digium.com/pipermail/asterisk-users/2005-March/097922.html _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
> Anyone know what I need to do to get the FXO port on the SPA 3000 to > forward calls to Asterisk? My Asterisk is running on port 5061 and I > set the dial plan on the device to forward to s@asteriskip:5061 but > Asterisk is not picking it up. I can see on tcpdump traces that the > Invite packets do go to through to the asterisk machine on port 5061, > but it's not picking them up. sip debug does not show any packets > either.Take a look at this: http://lists.digium.com/pipermail/asterisk-users/2005-March/097922.html