Goolsby, Daniel S (Daniel)
2005-May-06 14:16 UTC
[Asterisk-Users] Wildcard TE110p initial setup
I'm not 'overly' new to asterisk, but I am very new to the Digium card / Telco aspect of it. I was able to get a TE110p card, installed.. and hooked a t1 up to it. I'm using zttool to just look at 'some' output. Here is what it looks like when I just load it up: Current Alarms: No alarms. ? ? ? ? Sync Source: Internally clocked ? ? ? ? ? IRQ Misses: 0 ? ? ? ? ? Bipolar Viol: 0 ? ? ? ? ? Tx/Rx Levels: 0/ 0 ? ? ? ? ? Total/Conf/Act: 24/ 24/ 0 ? ? ? ? ? 111111111122222 ???????? ? ? ? ? ? 123456789012345678901234 ? Back ? ? ? ? ? ? TxA 000000000000000000000000 ???????? ? ? ? ? ? TxB 000000000000000000000000 ? ? ? ? ? TxC 000000000000000000000000 ? # ? ? ? TxD 000000000000000000000000 ? ? ? ? ???????? ? ? ? ? RxA 000000000000000000000000 ? Loop ? ? ? ? ? RxB 000000000000000000000000 ???????? ? ? ? ? RxC 000000000000000000000000 ? ? ? ? RxD 000000000000000000000000 ? If I make a call to one of the phone numbers in my block, the zttool output goes to this: ? Current Alarms: No alarms. ? ? ? ? Sync Source: Internally clocked ? ? ? ? ? IRQ Misses: 0 ? ? ? ? ? Bipolar Viol: 0 ? ? ? ? ? Tx/Rx Levels: 0/ 0 ? ? ? ? ? Total/Conf/Act: 24/ 24/ 1 ? ? ? ? ? 111111111122222 ???????? ? ? ? ? ? 123456789012345678901234 ? Back ? ? ? ? ? ? TxA 000000000000000000000000 ???????? ? ? ? ? ? TxB 000000000000000000000000 ? ? ? ? ? TxC 000000000000000000000000 ? # ? ? ? TxD 000000000000000000000000 ? ? ? ? ???????? ? ? ? ? RxA 100000000000000000000000 ? Loop ? ? ? ? ? RxB 100000000000000000000000 ???????? ? ? ? ? RxC 000000000000000000000000 ? ? ? ? RxD 000000000000000000000000 ? Channel 1's RxA and RxB goes to 1, while nothing else happens. I'm running somewhat of a latest build, with AMP installed. I see that it's configured that any incoming call is in the 'from-pstn', but I have yet to get a busy signal, or any response from the card. What I would like to know is it my card, software, or t1? I'll give up just about any information asked for, if someone could help me. Daniel -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050506/6a7e1a54/attachment.htm