thr3ads.net - asterisk users - [Asterisk-Users] here's my IAX callthrough app and some questions about problems I have. [Jan 2005]

If this information is useful, please help other people find it:
Share via:

Jess Coburn

2005-Jan-17 18:22 UTC

[Asterisk-Users] here's my IAX callthrough app and some questions about problems I have.

Hello all,

What my app does is accepts a call in on a Dial-In Number (DID) via
IAX, and then prompts the caller for the top secret password (123) and
then authenticates the user and prompts them to dial in the number
they'd like to call. Once they press pound after dialing in the number
it will read it back to them, if they press pound it will attempt to
connect via the second IAX provider, if they press star it will allow
them enter in the number over again.

Now here's the problems and questions:

1. DTMF detection seems flawed, sometimes it's dead on but alot of
times it will see a single keypress as multiple keypresses. So I may
press 561 but it will see 566661 and all three keypresses are about
the same length. Is this unique to my case or do you others see this
too. I suspect it's due to either background noise or maybe
packetloss? Any ideas on how to clean this up?

2. The only way I can get the app to fire off is if I put the
extension mapping in as _NXXNXXXXXX,1,CMD I'd like to use s,1,CMD but
I don't know what I'm missing here or doing wrong.

Below are a copies of my extensions.conf file and my iax.conf file. 

Regards,
Jess

extensions.conf
file---------------------------------------------------------------------

[general]
static=yes
writeprotect=no

[globals]
${OUTGOING-NUM}=XXXX


[arbitrary-in]  ; <-- Should match the context you have 
                   ;     under [incoming] in iax.conf
exten => _NXXNXXXXXX,1,Answer
exten => _NXXNXXXXXX,2,Background(vm-password)
exten => _NXXNXXXXXX,3,Authenticate(123)
exten => _NXXNXXXXXX,4,Playback(beep)
exten => _NXXNXXXXXX,5,SetVar(NR=)
exten => _NXXNXXXXXX,6,Goto(testdtmf|s|1)

; 
; This context is used by the sample [arbitrary-name]
; context above to read back each digit you press.
; 
[testdtmf]
exten => s,1,SetVar(NR=)
exten => s,2,Background(pls-entr-num-uwish2-call)
exten => s,3,Background(and-prs-pound-whn-finished)
exten => s,4,Background(beep)
exten => s,5,WaitExten(10)
exten => _x,1,SetVar(NR=${NR}${EXTEN})
exten => _x,2,NoOp(${NR})
exten => _x,3,Goto(testdtmf|s|5)
exten => _#,1,Goto(verifynumber|s|1)
exten => i,1,Goto(testdtmf|s|1)
exten => t,1,Hangup

[verifynumber]
exten => s,1,Background(you-dialed)
exten => s,2,SayDigits(${NR})
exten => s,3,Background(if-correct-press)
exten => s,4,Background(pound)
exten => s,5,Background(otherwise-press)
exten => s,6,Background(star)
exten => _#,1,Background(pls-wait-connect-call)
exten => _#,2,Dial(IAX2/${OUTGOING-NUM}@outgoing/${NR},30)
exten => _#,3,Background(something-terribly-wrong);
exten => _#,4,Background(goodbye)
exten => _#,5,Hangup 
exten => _*,1,Goto(testdtmf|s|1)


iax.conf file
--------------------------------------------------------------------------------------
; iax.conf 				         

[general]

${INCOMING-USR}=SECRET-USERNAME
${INCOMING-PWD}=SECRET-PWD
${LIVEVOIP-SVR}=217.160.244.186

bandwidth=high
disallow=lpc10			
jitterbuffer=yes
dropcount=2
maxjitterbuffer=500
maxexcessbuffer=80
minexcessbuffer=10
jittershrinkrate=1

register => ${INCOMING-USR}:${INCOMING-PWD}@${INCOMING-SVR}
tos=lowdelay

[incoming]
; this is the incoming IAX provider
type=user
secret=ITS-SECRET
deny=0.0.0.0/0.0.0.0
permit=217.160.244.186/255.255.255.0
context=arbitrary-in


[outgoing] 
;this is the outgoing IAX provider
type=peer 
host= 216.118.117.46
secret= ITS-SECRET
auth=md5 
notransfer=yes 
context=default

Brian Dingman

2005-Jan-23 21:04 UTC

head link

[Asterisk-Users] here's my IAX callthrough app and some questions about problems I have.

Did you ever get DTMF to work reliably with LiveVoip. I am having the
exact same problems.


On Mon, 17 Jan 2005 20:22:30 -0500, Jess Coburn <jess.coburn@gmail.com>
wrote:> Hello all,
> 
> What my app does is accepts a call in on a Dial-In Number (DID) via
> IAX, and then prompts the caller for the top secret password (123) and
> then authenticates the user and prompts them to dial in the number
> they'd like to call. Once they press pound after dialing in the number
> it will read it back to them, if they press pound it will attempt to
> connect via the second IAX provider, if they press star it will allow
> them enter in the number over again.
> 
> Now here's the problems and questions:
> 
> 1. DTMF detection seems flawed, sometimes it's dead on but alot of
> times it will see a single keypress as multiple keypresses. So I may
> press 561 but it will see 566661 and all three keypresses are about
> the same length. Is this unique to my case or do you others see this
> too. I suspect it's due to either background noise or maybe
> packetloss? Any ideas on how to clean this up?
> 
> 2. The only way I can get the app to fire off is if I put the
> extension mapping in as _NXXNXXXXXX,1,CMD I'd like to use s,1,CMD but
> I don't know what I'm missing here or doing wrong.
> 
> Below are a copies of my extensions.conf file and my iax.conf file.
> 
> Regards,
> Jess
> 
> extensions.conf
> file---------------------------------------------------------------------
> 
> [general]
> static=yes
> writeprotect=no
> 
> [globals]
> ${OUTGOING-NUM}=XXXX
> 
> [arbitrary-in]  ; <-- Should match the context you have
>                    ;     under [incoming] in iax.conf
> exten => _NXXNXXXXXX,1,Answer
> exten => _NXXNXXXXXX,2,Background(vm-password)
> exten => _NXXNXXXXXX,3,Authenticate(123)
> exten => _NXXNXXXXXX,4,Playback(beep)
> exten => _NXXNXXXXXX,5,SetVar(NR=)
> exten => _NXXNXXXXXX,6,Goto(testdtmf|s|1)
> 
> ;
> ; This context is used by the sample [arbitrary-name]
> ; context above to read back each digit you press.
> ;
> [testdtmf]
> exten => s,1,SetVar(NR=)
> exten => s,2,Background(pls-entr-num-uwish2-call)
> exten => s,3,Background(and-prs-pound-whn-finished)
> exten => s,4,Background(beep)
> exten => s,5,WaitExten(10)
> exten => _x,1,SetVar(NR=${NR}${EXTEN})
> exten => _x,2,NoOp(${NR})
> exten => _x,3,Goto(testdtmf|s|5)
> exten => _#,1,Goto(verifynumber|s|1)
> exten => i,1,Goto(testdtmf|s|1)
> exten => t,1,Hangup
> 
> [verifynumber]
> exten => s,1,Background(you-dialed)
> exten => s,2,SayDigits(${NR})
> exten => s,3,Background(if-correct-press)
> exten => s,4,Background(pound)
> exten => s,5,Background(otherwise-press)
> exten => s,6,Background(star)
> exten => _#,1,Background(pls-wait-connect-call)
> exten => _#,2,Dial(IAX2/${OUTGOING-NUM}@outgoing/${NR},30)
> exten => _#,3,Background(something-terribly-wrong);
> exten => _#,4,Background(goodbye)
> exten => _#,5,Hangup
> exten => _*,1,Goto(testdtmf|s|1)
> 
> iax.conf file
--------------------------------------------------------------------------------------
> ; iax.conf
> 
> [general]
> 
> ${INCOMING-USR}=SECRET-USERNAME
> ${INCOMING-PWD}=SECRET-PWD
> ${LIVEVOIP-SVR}=217.160.244.186
> 
> bandwidth=high
> disallow=lpc10
> jitterbuffer=yes
> dropcount=2
> maxjitterbuffer=500
> maxexcessbuffer=80
> minexcessbuffer=10
> jittershrinkrate=1
> 
> register => ${INCOMING-USR}:${INCOMING-PWD}@${INCOMING-SVR}
> tos=lowdelay
> 
> [incoming]
> ; this is the incoming IAX provider
> type=user
> secret=ITS-SECRET
> deny=0.0.0.0/0.0.0.0
> permit=217.160.244.186/255.255.255.0
> context=arbitrary-in
> 
> [outgoing]
> ;this is the outgoing IAX provider
> type=peer
> host= 216.118.117.46
> secret= ITS-SECRET
> auth=md5
> notransfer=yes
> context=default
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Maybe Matching Threads

Search for more possibly parallel threads

asterisk users - Jan 2005 - here's my IAX callthrough app and some questions about problems I have.

[Asterisk-Users] here's my IAX callthrough app and some questions about problems I have.

[Asterisk-Users] here's my IAX callthrough app and some questions about problems I have.

Maybe Matching Threads