Hi , Anyone can help me to configure zapata.conf for a TDM04b ?? I can place outgoing calls (with calls files) from Zap/1 but the problem is that from Zap/ 3 is not possible. Is there a place to add more information to configure channels ? Also, the channels configuration is static, I mean if I define a context for a channel in zapata.conf this will be used without the possibility to change when asterisk is running ? My [channels] section from zapata.conf is: [channels] context=default; switchtype=national; rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no signalling=fxs_ks echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds callerid=asreceived channel=>3,1 context=incoming_Zap2 signalling=fxs_ks channel=>2 context=incoming_Zap4 signalling=fxs_ks channel =>4 Any help would be very much appreciated
Hi What type of expansion cards do you have on this board, i.e. how many fxo's and how many fxs? Regards, Christiaan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Ciprian Zetea Sent: Thursday, November 18, 2004 12:02 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] configure channels Hi , Anyone can help me to configure zapata.conf for a TDM04b ?? I can place outgoing calls (with calls files) from Zap/1 but the problem is that from Zap/ 3 is not possible. Is there a place to add more information to configure channels ? Also, the channels configuration is static, I mean if I define a context for a channel in zapata.conf this will be used without the possibility to change when asterisk is running ? My [channels] section from zapata.conf is: [channels] context=default; switchtype=national; rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no signalling=fxs_ks echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds callerid=asreceived channel=>3,1 context=incoming_Zap2 signalling=fxs_ks channel=>2 context=incoming_Zap4 signalling=fxs_ks channel =>4 Any help would be very much appreciated _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
> Anyone can help me to configure zapata.conf for a TDM04b ?? I can > place outgoing calls (with calls files) from Zap/1 but the problem is that > from Zap/ 3 is not possible. Is there a place to add more information > to configure channels ? Also, the channels configuration is static, I > mean if I define a context for a channel in zapata.conf this will be > used without the possibility to change when asterisk is running ? > > My [channels] section from zapata.conf is: > > [channels] > > context=default; > switchtype=national; > rxwink=300 > usecallerid=yes > hidecallerid=no > > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.0 > > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > > signalling=fxs_ks > echotraining=400 ; Asterisk trains to the beginning of the call, > number is in milliseconds > callerid=asreceived > channel=>3,1 > > context=incoming_Zap2 > signalling=fxs_ks > channel=>2 > > context=incoming_Zap4 > signalling=fxs_ks > channel =>4 > > Any help would be very much appreciated----------------------------- I'd suggest changing the above to something like the following as it makes the use of contexts much clearer to the reader (and probably yourself). [channels] <list all the parameters here that will be inherited below> context=default <list parameters that are specific to channel 1> channel=>1 context=incoming_Zap2 <list parameters that are specific to channel 2> channel=>2 context=default <list parameters that are specific to channel 3> channel=>3 context=incoming_Zap4 <list parameters that are specific to channel 4 channel=>4 Also, in your original posting, I see things like context=default; switchtype=national; with semicolons on the end. Is that what you really want? Bet not. Since you didn't state what these four tdm04b fxo ports are attaching to, I'll assume four central office based analog pstn lines. In that is the correct guess, then switchtype=national; rxwink=300 are not needed as they don't pertain to the likely analog pstn lines.