khoonking
2004-Oct-04 22:33 UTC
[Asterisk-Users] problems with X100P - No channel type registered for 'Zap'
Hi, I have already installed the X100P drivers but when I make to make call call, I always get No channel type registered for 'Zap'. Any idea how to solve this problem? It seems that the Zap module is not loaded but I have already load the driver by modprobe zaptel> modprobe wcfxo > ztcfg -vvthanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041005/524f46a4/attachment.htm
Steven Critchfield
2004-Oct-04 22:44 UTC
[Asterisk-Users] problems with X100P - No channel type registered for 'Zap'
On Tue, 2004-10-05 at 13:33 +0800, khoonking wrote:> Hi, > > I have already installed the X100P drivers but when I make > to make call call, I always get No channel type registered for 'Zap'. > > Any idea how to solve this problem? > > > > It seems that the Zap module is not loaded but I have already load the > driver by > > modprobe zaptel > > modprobe wcfxo > > ztcfg -vvmodprobe wcfxo will insmod all other dependant modules. So modprobe zaptel is actually unnecessary. Did you properly edit the config files for zapata.conf and zaptel.conf so that the hardware and asterisk both are know about the card? Did you specify a channel specifically or did you dial a group? Think you might be able to incorporate a tad more information in your next post such as config snippits that are relavent to your problem? -- Steven Critchfield <critch@basesys.com>
el Flynn
2004-Oct-06 00:36 UTC
[Asterisk-Users] problems with X100P - No channel type registered for 'Zap'
khoonking wrote:> Hi, > > I have already installed the X100P drivers but when I make to > make call call, I always get No channel type registered for 'Zap'. > > It seems that the Zap module is not loaded but I have already load the > driver by > > modprobe zaptel > modprobe wcfxo > ztcfg -vv >Try running the "dmesg" command, and scanning it to see if the card registers okay. See if you can find a line that says something like kernel: Found a Wildcard FXO see if any errors came up in the preceding lines of the dmesg output. If things look okay there, you might want to double-check your zaptel.conf and zapata.conf settings, something may be screwy in those files that's preventing you from using the card. Flynn