asterisk users - Sep 2004 - NEWBIE - No Audio on ISDN BRI (Teles PCI)

Hello, folks! This is my first post here.

I installed Asterisk from scratch and after reading a lot of information on
voip-info and this mailing list I was able to get started.

I can make sip-to-sip calls (just on a basic extentions structure, let's say
for beginners) but now I'm trying to make this system works with my Teles
ISDN BRI PCI card.

I can make and receive calls through X-Ten Pro software. Calls are routed
through Asterisk to/from X-Ten client but here's my real problem: NO AUDIO
AT ALL! I can't hear anything, nor can the other party.

Does anyone here now anything about it? Am I doing anything wrong?

I'm new to ISDN under Linux, but I think it's ok since the calls are
corectly routed and I can see info on isdnlog. I also tested my card on
minicom, as suggested on voip-info.

One more question: can I route SIP calls to a ISDN (digital) phone connected
on the same bus? How do I set the TEI on which the call should be answered,
in case it's possible?

By the way, I never used this ISDN card to place/receive calls or connect to
an ISP on Linux, but I already received/transmited faxes on Windows 2000 SP4
before installing Asterisk.

Thank you so much in advance and I appologize if these questions have
already been answered somewhere. I just need some guidance.


Take care,

[ Dhennys  Pestana ]
[ +55(21)9339-3737 ]


Linux: SuSE 8.2 2.4.20-4GB
Asterisk: 1.0 RC1 (from tarball)
ISDN BRI: lspci shows "Tiger Jet Network Inc. Intel 537", but I know
for
sure it's actually a "Teles PCI" cause I bought it on a sealed box

use chan_capi from www.junghanns.net for the fritzcard. Or even
better, get rid of the fritz card and get a hfc-pci card and use it
with bri-stuff from the same address


On Sat, 18 Sep 2004 17:23:30 -0300, Pestana Networks, Inc.
<listas@pestana.com.br> wrote:
> Hello, folks! This is my first post here.
> 
> I installed Asterisk from scratch and after reading a lot of information on
> voip-info and this mailing list I was able to get started.
> 
> I can make sip-to-sip calls (just on a basic extentions structure,
let's say
> for beginners) but now I'm trying to make this system works with my
Teles
> ISDN BRI PCI card.
> 
> I can make and receive calls through X-Ten Pro software. Calls are routed
> through Asterisk to/from X-Ten client but here's my real problem: NO
AUDIO
> AT ALL! I can't hear anything, nor can the other party.
> 
> Does anyone here now anything about it? Am I doing anything wrong?
> 
> I'm new to ISDN under Linux, but I think it's ok since the calls
are
> corectly routed and I can see info on isdnlog. I also tested my card on
> minicom, as suggested on voip-info.
> 
> One more question: can I route SIP calls to a ISDN (digital) phone
connected
> on the same bus? How do I set the TEI on which the call should be answered,
> in case it's possible?
> 
> By the way, I never used this ISDN card to place/receive calls or connect
to
> an ISP on Linux, but I already received/transmited faxes on Windows 2000
SP4
> before installing Asterisk.
> 
> Thank you so much in advance and I appologize if these questions have
> already been answered somewhere. I just need some guidance.
> 
> Take care,
> 
> [ Dhennys  Pestana ]
> [ +55(21)9339-3737 ]
> 
> Linux: SuSE 8.2 2.4.20-4GB
> Asterisk: 1.0 RC1 (from tarball)
> ISDN BRI: lspci shows "Tiger Jet Network Inc. Intel 537", but I
know for
> sure it's actually a "Teles PCI" cause I bought it on a
sealed box
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 


-- 
Michael Bielicki