I'm going to modify the queue announcements to allow for rounded seconds
(e.g. we want to know to the tens of seconds. E.g. Average wait 1 minute 20
seconds).
I'm going to add the optional announce of seconds to the queue config and a
rounding factor (e.g. 10 in our case).
The following parameters will be added
Queue-announce-seconds (default is off)
Queue-seconds (default will be an as yet unrecorded "queue-seconds")
Queue-rounding-seconds (default will be 10)
Have I missed anything?
Steve
The information contained in this email is intended for the personal and
confidential use
of the addressee only. It may also be privileged information. If you are not the
intended
recipient then you are hereby notified that you have received this document in
error and
that any review, distribution or copying of this document is strictly
prohibited. If you have
received this communication in error, please notify Brendata immediately on:
+44 (0)1268 466100, or email 'technical@brendata.co.uk'
Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK
Registered Office as above. Registered in England No. 2764339
See our current vacancies at www.brendata.co.uk
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040628/345a137c/attachment.htm
