Hi, I'm trying to get a fritz working in our asterisk box, however I'm getting the following error and was wondering if anyone could be of any help: -- Executing Macro("SIP/2002-5501", "enum-call|call|0405152568") in new stack -- Executing Goto("SIP/2002-5501", "call|0405152568|1") in new stack -- Goto (call,0405152568,1) == Channel 'SIP/2002-5501' jumping out of macro 'enum-call' -- Executing Dial("SIP/2002-5501", "CAPI/295634800:0405152568") in new stack -- data = 295634800:0405152568 -- capi request omsn = 295634800 == found capi with omsn = 295634800 == CAPI Call CAPI[contr1/295634800]/4 == CAPI Call CAPI[contr1/295634800]/4 -- Called 295634800:0405152568 -- CONNECT_CONF ID=001 #0x0008 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 == received CONNECT_CONF PLCI = 0x101 INFO = 0 -- DISCONNECT_IND ID=001 #0x0004 LEN=0014 Controller/PLCI/NCCI = 0x101 Reason = 0x3302 == DISCONNECT_IND PLCI=0x101 REASON=0x3302 == No one is available to answer at this time According to the manuals, 0x3302 means unable to set up D channel layer 2. Where is this problem likely to originate from? Us or our telco (which is Telstra)? Thanks, Andrew _________________________ Andrew Yager Real World Technology Solutions Real People, Real SolUtions (tm) ph: (02) 9945 2567 fax: (02) 9945 2566 mob: 0405 15 2568 http://www.rwts.com.au/ _________________________ -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 2365 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040608/c3238be3/smime.bin