I have a Gigabyte K7 motherboard with an Athlon 2400+ processor. Before the T1 install I had two T100P cards, one for the channel bank and the other unused. This ran perfect for a month. Last week we installed a new integrated T1 into the unused T100P (to replace POTS lines and DSL.) In BIOS, I disabled some unused peripherals so that each T100P would find its own unique IRQ. I also installed the updated asterisk, libpri, and zaptel sources. I have seen two system freezes--one on Friday and one this morning. The whole system freezes--no LAN, no phones, no console. During this morning's freeze there were no calls in progress. The logs say nothing. Has anyone else seen this? I suspect it isn't an asterisk problem, but I would appreciate feedback. Thanks, Mike
Currently in progress of trying to debug similar problem on my own system. Sometimes it happened during call transfers, but this last time, it happened all by itself at 4:00 AM, no calls even close. Complete system Freeze, Nothing at all workings, except the reset button. You setup is vastly different from mine to. Dual Pentium III SMP, X100P Dual TDM400P What type and version of Linux? Mine is RH9 2.4.20-8??? Would love to track this one down... --- Michael Welter <mike@introspect.com> wrote:> I have a Gigabyte K7 motherboard with an Athlon > 2400+ processor. Before > the T1 install I had two T100P cards, one for the > channel bank and the > other unused. This ran perfect for a month. > > Last week we installed a new integrated T1 into the > unused T100P (to > replace POTS lines and DSL.) In BIOS, I disabled > some unused > peripherals so that each T100P would find its own > unique IRQ. > > I also installed the updated asterisk, libpri, and > zaptel sources. > > I have seen two system freezes--one on Friday and > one this morning. The > whole system freezes--no LAN, no phones, no console. > During this > morning's freeze there were no calls in progress. > The logs say nothing. > > Has anyone else seen this? I suspect it isn't an > asterisk problem, but > I would appreciate feedback. > > Thanks, > Mike > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users __________________________________ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html
Did you have any active meetme sessions at the time of the freeze? What Asterisk version are you using? MATT--- -----Original Message----- From: Jonathan Biggs [mailto:jon_209@yahoo.com] Sent: Monday, February 09, 2004 1:05 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] System freeze Currently in progress of trying to debug similar problem on my own system. Sometimes it happened during call transfers, but this last time, it happened all by itself at 4:00 AM, no calls even close. Complete system Freeze, Nothing at all workings, except the reset button. You setup is vastly different from mine to. Dual Pentium III SMP, X100P Dual TDM400P What type and version of Linux? Mine is RH9 2.4.20-8??? Would love to track this one down... --- Michael Welter <mike@introspect.com> wrote:> I have a Gigabyte K7 motherboard with an Athlon > 2400+ processor. Before > the T1 install I had two T100P cards, one for the > channel bank and the > other unused. This ran perfect for a month. > > Last week we installed a new integrated T1 into the > unused T100P (to > replace POTS lines and DSL.) In BIOS, I disabled > some unused > peripherals so that each T100P would find its own > unique IRQ. > > I also installed the updated asterisk, libpri, and > zaptel sources. > > I have seen two system freezes--one on Friday and > one this morning. The > whole system freezes--no LAN, no phones, no console. > During this > morning's freeze there were no calls in progress. > The logs say nothing. > > Has anyone else seen this? I suspect it isn't an > asterisk problem, but > I would appreciate feedback. > > Thanks, > Mike > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users __________________________________ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Did you possibly have astman running on the localhost? I found that I was getting kernel panics while using astman on an SMP machine with dual T400P cards. Did you see the message on the console before you reset the box? Did you possibly have a serial console connected logging console message? -sb -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Jonathan Biggs Sent: Monday, February 09, 2004 1:05 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] System freeze Currently in progress of trying to debug similar problem on my own system. Sometimes it happened during call transfers, but this last time, it happened all by itself at 4:00 AM, no calls even close. Complete system Freeze, Nothing at all workings, except the reset button. You setup is vastly different from mine to. Dual Pentium III SMP, X100P Dual TDM400P What type and version of Linux? Mine is RH9 2.4.20-8??? Would love to track this one down... --- Michael Welter <mike@introspect.com> wrote:> I have a Gigabyte K7 motherboard with an Athlon > 2400+ processor. Before > the T1 install I had two T100P cards, one for the > channel bank and the > other unused. This ran perfect for a month. > > Last week we installed a new integrated T1 into the > unused T100P (to > replace POTS lines and DSL.) In BIOS, I disabled > some unused > peripherals so that each T100P would find its own > unique IRQ. > > I also installed the updated asterisk, libpri, and > zaptel sources. > > I have seen two system freezes--one on Friday and > one this morning. The > whole system freezes--no LAN, no phones, no console. > During this > morning's freeze there were no calls in progress. > The logs say nothing. > > Has anyone else seen this? I suspect it isn't an > asterisk problem, but > I would appreciate feedback. > > Thanks, > Mike > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users> To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users __________________________________ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Today I had five system freezes. After re-examining the log file I see the following line precedes each freeze: "Got event 2 (Ring/Answered)" However, I also get this same message numerous times without a freeze. Many are followed by "Unable to create channel of type Zap". This is a single processor Athlon system with two T100P cards. As far as I know, there were no calls in progress when the system froze. There has been no meetme activity. There shouldn't have been any inbound call activity on the new T1 (the TNs haven't been ported yet)--inbound calls use the POTS lines, outbound the new T1 circuit. Each T100P has a separate IRQ. Any feedback would be appreciated. Mike Michael Welter wrote:> I have a Gigabyte K7 motherboard with an Athlon 2400+ processor. Before > the T1 install I had two T100P cards, one for the channel bank and the > other unused. This ran perfect for a month. > > Last week we installed a new integrated T1 into the unused T100P (to > replace POTS lines and DSL.) In BIOS, I disabled some unused > peripherals so that each T100P would find its own unique IRQ. > > I also installed the updated asterisk, libpri, and zaptel sources. > > I have seen two system freezes--one on Friday and one this morning. The > whole system freezes--no LAN, no phones, no console. During this > morning's freeze there were no calls in progress. The logs say nothing. > > Has anyone else seen this? I suspect it isn't an asterisk problem, but > I would appreciate feedback. > > Thanks, > Mike > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >
As I said in my first post, I don't think this is an asterisk problem. Last night I swapped-out the Netgear NIC card, and things appear to have settled down (no more event 2 messages). I really appreciate all the help I received from the list members and Mark. I'll update tracking bug 963 when I'm satisfied the problem is fixed. Thanks, Michael Welter Michael Welter wrote:> I have a Gigabyte K7 motherboard with an Athlon 2400+ processor. Before > the T1 install I had two T100P cards, one for the channel bank and the > other unused. This ran perfect for a month. > > Last week we installed a new integrated T1 into the unused T100P (to > replace POTS lines and DSL.) In BIOS, I disabled some unused > peripherals so that each T100P would find its own unique IRQ. > > I also installed the updated asterisk, libpri, and zaptel sources. > > I have seen two system freezes--one on Friday and one this morning. The > whole system freezes--no LAN, no phones, no console. During this > morning's freeze there were no calls in progress. The logs say nothing. > > Has anyone else seen this? I suspect it isn't an asterisk problem, but > I would appreciate feedback. > > Thanks, > Mike > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >
On Monday 09 February 2004 11:45 am, Michael Welter wrote:> I have a Gigabyte K7 motherboard with an Athlon 2400+ processor. > Before the T1 install I had two T100P cards, one for the channel bank > and the other unused. This ran perfect for a month. > > Last week we installed a new integrated T1 into the unused T100P (to > replace POTS lines and DSL.) In BIOS, I disabled some unused > peripherals so that each T100P would find its own unique IRQ. > > I also installed the updated asterisk, libpri, and zaptel sources. > > I have seen two system freezes--one on Friday and one this morning. > The whole system freezes--no LAN, no phones, no console. During this > morning's freeze there were no calls in progress. The logs say > nothing. > > Has anyone else seen this? I suspect it isn't an asterisk problem, > but I would appreciate feedback. > > Thanks, > MikeI'm running RH9 and it locks up on every kernel that I've used since before 9.0 came out. For me it's been the thing you have to live with if you want to use *. I've used completely different h/w except for the same Digium card (TDM400P w one port.) Many versions of * too. -- Steve __________________________________________________ You actually need to constantly be alert and willing to handle things, or life will find a way to get you good!