asterisk users - Dec 2003 - Does Asterisk support legacy Dialogic products?

Hi all,

I just checked out that Asterisk which is a platform I am interested of.  I
would like to install it to the Linux box for a trial.  I have some legacy
Dialogic hardware on hand, don't know they will work with Asterisk or not. 
For analog loop start interface I have Dialogic D/41 E which is of ISA bus with
four Telco interfaces.  Will it work on Asterisk?

Best regards,
Patrick.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20031230/f0d3234a/attachment.htm

Hi Patrick,

Welcome to the list. I'm afraid Asterisk doesn't have the interface to
the
old drivers just the new JCT series.

Peter
At 14:36 30/12/03 +0800, you wrote:
>Hi all,
>
>I just checked out that Asterisk which is a platform I am interested 
>of.  I would like to install it to the Linux box for a trial.  I have some 
>legacy Dialogic hardware on hand, don't know they will work with
Asterisk
>or not.  For analog loop start interface I have Dialogic D/41 E which is 
>of ISA bus with four Telco interfaces.  Will it work on Asterisk?
>
>Best regards,
>Patrick.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20031230/576f779c/attachment.htm

hi,

i have been looking for any GUI that would make things easier to configure
friends and peers into asterisk. I also looked at some posts in the lists. There
are discussions that say text or CLI is more appropriate for adding users and
stuff. Anyone know of any interface that would make things easier. How has
NuFone or Voicepulse or IaxTel guys have implemented their asterisk box to add
friends or peers?

Suggest.

Chandra
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20031230/13616077/attachment.htm

Chandra,

Take a look at:  http://sourceforge.net/projects/astguiclient/ it may be 
what your looking for or you could use the ideas if you want to make changes.

I believe it was written by Matt Florell, Thanks Matt.

At 14:42 30/12/03 +0545, you wrote:
>hi,
>
>i have been looking for any GUI that would make things easier to configure 
>friends and peers into asterisk. I also looked at some posts in the lists. 
>There are discussions that say text or CLI is more appropriate for adding 
>users and stuff. Anyone know of any interface that would make things 
>easier. How has NuFone or Voicepulse or IaxTel guys have implemented their 
>asterisk box to add friends or peers?
>
>Suggest.
>
>Chandra
Peter Brown
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20031230/2770d9ff/attachment.htm

Patrick Wong wrote:
> Hi all,
>  
> I just checked out that Asterisk which is a platform I am interested 
> of.  I would like to install it to the Linux box for a trial.  I have 
> some legacy Dialogic hardware on hand, don't know they will work with 
> Asterisk or not.  For analog loop start interface I have Dialogic D/41 
> E which is of ISA bus with four Telco interfaces.  Will it work on 
> Asterisk?
>  
> Best regards,
> Patrick.
That card's haardware is not capable of providing any VoIP 
functionality. It is not full duplex. The newer JCT cards can be used, 
but they still don't work that well, due to card limitations.

Regards,
Steve

>
> Steve Underwood wrote:
>
> > That card's haardware is not capable of providing any VoIP
> > functionality. It is not full duplex. The newer JCT cards can be used,
> > but they still don't work that well, due to card limitations.
>
>
Hi Steve,

Thanks for your advice.  My thought is to start this new project in the
following steps:
1. Configure a very simple paltform (e.g. POTS) to prove the feasibility;
2. Demonstrate to technical management;
3. Acquire budget and resources for development works.

Since Linux-based PBX server is new to us, live demonstration is more
effective to raise the management's interest.  I would like to use the
resources currently on hand to experiment.

I searched the archived mail messages and found that drivers for Dialogic
are commercially available for $15 per channel?  By one channel means a
single loop start Telco interface?

Many thanks,
Patrick Wong.