The channel has to come after the signalling and other configuration lines.
It should look something like this:
signalling=fxo_ks
context=internal
channel => 1-3
Don't forget to configure zaptel.conf either. Add this line to it.
fxoks=1-3
-John
----- Original Message -----
From: "Jay Tyndall" <asterisk@tyndall.id.au>
To: <asterisk-users@lists.digium.com>
Sent: Sunday, July 13, 2003 11:38 PM
Subject: [Asterisk-Users] Setting up A TDM400P
>
>
> Hi,
>
> I am having some trouble getting a TDM400P working, and would be very
> appriciative of some ideas.
>
> I have installed a TDM400P, and downloaded the appropriate files from CVS,
> compiled, installed and modprobe'd the devices.
>
> From dmesg:
> Module 0: Initialized
> Module 1: Initialized
> Module 2: Initialized
> Module 3: Not installed
> Found a Wildcard FXS: Wildcard S400P Prototype (4 modules)
>
> So, it has found the card OK, but I am little confused as to what I need
> to put in zapata.conf to make these 3 ports work with the analog phones I
> have plugged into these ports.
>
> I have tried looking at the docs on the digium site, but cannot seem to
get> it worked out.
>
> I tried putting the following in zapata.conf
> channel => 1
> signalling => fxo_ks
>
> And this in extensions.conf
> exten => 200,1,Dial(Zap/1)
>
>
> When I start asterisk, I get the following:
> [chan_zap.so] => (Zapata Telephony)
> WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring
> switchtype
> WARNING[16384]: File chan_zap.c, Line 6654 (load_module): Ignoring rxwink
> WARNING[16384]: File chan_zap.c, Line 576 (zt_open): Unable to specify
> channel 1: No such device or address
> ERROR[16384]: File chan_zap.c, Line 4746 (mkintf): Unable to open channel
> 1: No such device or address
> here = 0, tmp->channel = 0, channel = 1
> ERROR[16384]: File chan_zap.c, Line 6404 (load_module): Unable to register
> channel '1'
> WARNING[16384]: File loader.c, Line 299 (ast_load_resource): chan_zap.so:
> load_module failed, returning -1
> WARNING[16384]: File loader.c, Line 394 (load_modules): Loading module
> chan_zap.so failed!
>
>
> Thanks for your help
> Jay
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>