Hi all, what is the correct way to setup both incoming isdn lines and an outgoing group? I have 2 ISDN BRI lines connected to 2 ISDN cards running under i4l with HiSax drivers with the following config in modems.conf: msn=855606340 incomingmsn=634? device => /dev/ttyI0 device => /dev/ttyI1 device => /dev/ttyI2 device => /dev/ttyI3 group=1 msn=855606340 ;device => /dev/ttyI0 ;device => /dev/ttyI1 device => /dev/ttyI2 device => /dev/ttyI3 Issue 1: But the strange thing is that if i have an imon running and try to call myself calls still seem to go out over ttyI0. Issue 2: I end up in voicemail (which is ok, since im calling myself.) but i still hear the ringing and cant hear the voiceprompt from voicemail. Does anyone have any ideas? Please have a look at the log below. /Chris *CLI> -- Executing Dial("SIP/chrisarn-9c64", "Modem/g1:950155606343|60|r") in new stack -- Called g1:950155606343 -- Executing Macro("Modem[i4l]/ttyI0", "stdexten|6343|SIP/chris@217.215.73.79") in new stack -- Executing Dial("Modem[i4l]/ttyI0", "SIP/chris@217.215.73.79|20") in new stack -- Called chris@217.215.73.79 -- Got SIP response 486 "Busy Here" back from 217.215.73.79 -- SIP/217.215.73.79-e5be is busy == Everyone is busy at this time -- Executing VoiceMail("Modem[i4l]/ttyI0", "b6343") in new stack == Parsing '/etc/asterisk/voicemail.conf': Found -- Playing 'vm-theperson' Mar 26 16:15:12 astro kernel: isdn_tty: call from 855606340, -> RING on ttyI0 -- Playing 'digits/6' -- Playing 'digits/3' -- Playing 'digits/4' -- Playing 'digits/3' -- Playing 'vm-isonphone' -- Playing 'vm-intro' -- Playing 'beep' -- Recording to /var/spool/asterisk/vm/6343/INBOX/msg0004 -- User hung up == Parsing '/etc/asterisk/voicemail.conf': Found -- Hungup 'Modem[i4l]/ttyI3' == Spawn extension (default, 955606343, 1) exited non-zero on 'SIP/chrisarn-9c64'