Hello, I''m trying to import the xvpappliance into XCP but the import cmds never returns, XCP is currently installed in vmware player. The import cmd: xe vm-import filename=/mnt/nfs/xvpappliance-1.9.1-1.xva sr-uuid=95edafef-9f77-6927-496f-03f780ea2ec4 "/mnt/nfs" is a mounted nfs share exposed by WIN2008 R2, in which the storage repository is also created. When the import starts I see it create a file(f5238e75-5ab2-4c68-a8d5-543ded1ae946.vhd) in the repository folder. This file get to about 11.4MB and stops growing, I''ve waited over 1 hour and the vm-import cmd never returns and the vhd file does not get any bigger. I have to force vmware player to reboot, after it reboots I see the xvappliance listed in the "All VMs" menu of xcp with a status of halted. Attempts to start the vm results in msg "Failed: Traceback (most recent call last)" , given the xvp xva source is over 1GB and the vhd file is under 12M I''m assuming the file is incomplete. If any can advise me how to achieve a successful import it would be appreciated. Regards, Flash. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Outback Dingo
2011-Apr-10 19:36 UTC
Re: [Xen-users] Importing xvpappliance-1.9.1-1 into XCP 1.0
On Sun, Apr 10, 2011 at 3:17 PM, ramus56 <ramus56@live.com> wrote:> Hello, > > I''m trying to import the xvpappliance into XCP but the import cmds never > returns, XCP is currently installed in vmware player. > > The import cmd: > xe vm-import filename=/mnt/nfs/xvpappliance-1.9.1-1.xva > sr-uuid=95edafef-9f77-6927-496f-03f780ea2ec4 > > "/mnt/nfs" is a mounted nfs share exposed by WIN2008 R2, in which the > storage repository is also created. > When the import starts I see it create a > file(f5238e75-5ab2-4c68-a8d5-543ded1ae946.vhd) in the repository folder. > This file get to about 11.4MB and stops growing, I''ve waited over 1 hour > and > the vm-import cmd never returns and the vhd file does not get any bigger. > > I have to force vmware player to reboot, after it reboots I see the > xvappliance listed in the "All VMs" menu of xcp with a status of halted. > Attempts to start the vm results in msg "Failed: Traceback (most recent > call > last)" , given the xvp xva source is over 1GB and the vhd file is under 12M > I''m assuming the file is incomplete. > > If any can advise me how to achieve a successful import it would be > appreciated. >Odd ive imported the xvpappliance multiple times with out fail on XCP 1.0 matter of fact i just did it last night on a new XCP box, though im not sure why your running XCP inside vmware player.. which im guessing might be an issue, though cant say for sure it does import fine when XCP is on bare metal> > Regards, > > Flash. > > > > > > > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Just using vmware player is to proof out the concept until the rest of the hardware arrives. It will be XCP on bare metal(8GB ECC Ram), running XVP guest, Solaris based guest which will control 10TB under ZFS and a general purpose CentOS based guest. I would not expect XCP to behave any different between bare metal and running in a vm, if that is the cause of my issue. From: Outback Dingo [mailto:outbackdingo@gmail.com] Sent: Sunday, April 10, 2011 3:37 PM To: ramus56 Cc: xen-users@lists.xensource.com Subject: Re: [Xen-users] Importing xvpappliance-1.9.1-1 into XCP 1.0 On Sun, Apr 10, 2011 at 3:17 PM, ramus56 <ramus56@live.com> wrote: Hello, I''m trying to import the xvpappliance into XCP but the import cmds never returns, XCP is currently installed in vmware player. The import cmd: xe vm-import filename=/mnt/nfs/xvpappliance-1.9.1-1.xva sr-uuid=95edafef-9f77-6927-496f-03f780ea2ec4 "/mnt/nfs" is a mounted nfs share exposed by WIN2008 R2, in which the storage repository is also created. When the import starts I see it create a file(f5238e75-5ab2-4c68-a8d5-543ded1ae946.vhd) in the repository folder. This file get to about 11.4MB and stops growing, I''ve waited over 1 hour and the vm-import cmd never returns and the vhd file does not get any bigger. I have to force vmware player to reboot, after it reboots I see the xvappliance listed in the "All VMs" menu of xcp with a status of halted. Attempts to start the vm results in msg "Failed: Traceback (most recent call last)" , given the xvp xva source is over 1GB and the vhd file is under 12M I''m assuming the file is incomplete. If any can advise me how to achieve a successful import it would be appreciated. Odd ive imported the xvpappliance multiple times with out fail on XCP 1.0 matter of fact i just did it last night on a new XCP box, though im not sure why your running XCP inside vmware player.. which im guessing might be an issue, though cant say for sure it does import fine when XCP is on bare metal Regards, Flash. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Outback Dingo
2011-Apr-11 03:34 UTC
Re: [Xen-users] Importing xvpappliance-1.9.1-1 into XCP 1.0
Ok FYI just did it again on a fresh XCP bare metal install quad cpu, 4gb ram, scp xenwebmanager.xva root@192.168.10.112 ssh root@192.168.10.112 time xe vm-import filename=xenwebmanager.xva 6075a22b-c909-1590-e8c7-1d2fee37ca7e real 1m27.196s user 0m0.320s sys 0m1.800s On Sun, Apr 10, 2011 at 9:16 PM, ramus56 <ramus56@live.com> wrote:> Just using vmware player is to proof out the concept until the rest of the > hardware arrives. > > It will be XCP on bare metal(8GB ECC Ram), running XVP guest, Solaris based > guest which will control 10TB under ZFS and a general purpose CentOS based > guest. > > I would not expect XCP to behave any different between bare metal and > running in a vm, if that is the cause of my issue. > > > > > > *From:* Outback Dingo [mailto:outbackdingo@gmail.com] > *Sent:* Sunday, April 10, 2011 3:37 PM > *To:* ramus56 > *Cc:* xen-users@lists.xensource.com > *Subject:* Re: [Xen-users] Importing xvpappliance-1.9.1-1 into XCP 1.0 > > > > On Sun, Apr 10, 2011 at 3:17 PM, ramus56 <ramus56@live.com> wrote: > > Hello, > > I''m trying to import the xvpappliance into XCP but the import cmds never > returns, XCP is currently installed in vmware player. > > The import cmd: > xe vm-import filename=/mnt/nfs/xvpappliance-1.9.1-1.xva > sr-uuid=95edafef-9f77-6927-496f-03f780ea2ec4 > > "/mnt/nfs" is a mounted nfs share exposed by WIN2008 R2, in which the > storage repository is also created. > When the import starts I see it create a > file(f5238e75-5ab2-4c68-a8d5-543ded1ae946.vhd) in the repository folder. > This file get to about 11.4MB and stops growing, I''ve waited over 1 hour > and > the vm-import cmd never returns and the vhd file does not get any bigger. > > I have to force vmware player to reboot, after it reboots I see the > xvappliance listed in the "All VMs" menu of xcp with a status of halted. > Attempts to start the vm results in msg "Failed: Traceback (most recent > call > last)" , given the xvp xva source is over 1GB and the vhd file is under 12M > I''m assuming the file is incomplete. > > If any can advise me how to achieve a successful import it would be > appreciated. > > > > Odd ive imported the xvpappliance multiple times with out fail on XCP 1.0 > > matter of fact i just did it last night on a new XCP box, though im not > sure why your running XCP > > inside vmware player.. which im guessing might be an issue, though cant say > for sure > > it does import fine when XCP is on bare metal > > > > > Regards, > > Flash. > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users > > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Outback Dingo
2011-Apr-11 03:38 UTC
Re: [Xen-users] Importing xvpappliance-1.9.1-1 into XCP 1.0
and xvp time xe vm-import filename=xvpappliance-1.9.0-1.xva 7323c7d3-a05e-1b92-ba50-ba1db1d341fa real 0m50.732s user 0m0.590s sys 0m2.220s On Sun, Apr 10, 2011 at 11:34 PM, Outback Dingo <outbackdingo@gmail.com>wrote:> Ok FYI just did it again on a fresh XCP bare metal install > quad cpu, 4gb ram, > scp xenwebmanager.xva root@192.168.10.112 > ssh root@192.168.10.112 > time xe vm-import filename=xenwebmanager.xva > 6075a22b-c909-1590-e8c7-1d2fee37ca7e > > real 1m27.196s > user 0m0.320s > sys 0m1.800s > > > On Sun, Apr 10, 2011 at 9:16 PM, ramus56 <ramus56@live.com> wrote: > >> Just using vmware player is to proof out the concept until the rest of the >> hardware arrives. >> >> It will be XCP on bare metal(8GB ECC Ram), running XVP guest, Solaris >> based guest which will control 10TB under ZFS and a general purpose CentOS >> based guest. >> >> I would not expect XCP to behave any different between bare metal and >> running in a vm, if that is the cause of my issue. >> >> >> >> >> >> *From:* Outback Dingo [mailto:outbackdingo@gmail.com] >> *Sent:* Sunday, April 10, 2011 3:37 PM >> *To:* ramus56 >> *Cc:* xen-users@lists.xensource.com >> *Subject:* Re: [Xen-users] Importing xvpappliance-1.9.1-1 into XCP 1.0 >> >> >> >> On Sun, Apr 10, 2011 at 3:17 PM, ramus56 <ramus56@live.com> wrote: >> >> Hello, >> >> I''m trying to import the xvpappliance into XCP but the import cmds never >> returns, XCP is currently installed in vmware player. >> >> The import cmd: >> xe vm-import filename=/mnt/nfs/xvpappliance-1.9.1-1.xva >> sr-uuid=95edafef-9f77-6927-496f-03f780ea2ec4 >> >> "/mnt/nfs" is a mounted nfs share exposed by WIN2008 R2, in which the >> storage repository is also created. >> When the import starts I see it create a >> file(f5238e75-5ab2-4c68-a8d5-543ded1ae946.vhd) in the repository folder. >> This file get to about 11.4MB and stops growing, I''ve waited over 1 hour >> and >> the vm-import cmd never returns and the vhd file does not get any bigger. >> >> I have to force vmware player to reboot, after it reboots I see the >> xvappliance listed in the "All VMs" menu of xcp with a status of halted. >> Attempts to start the vm results in msg "Failed: Traceback (most recent >> call >> last)" , given the xvp xva source is over 1GB and the vhd file is under >> 12M >> I''m assuming the file is incomplete. >> >> If any can advise me how to achieve a successful import it would be >> appreciated. >> >> >> >> Odd ive imported the xvpappliance multiple times with out fail on XCP 1.0 >> >> matter of fact i just did it last night on a new XCP box, though im not >> sure why your running XCP >> >> inside vmware player.. which im guessing might be an issue, though cant >> say for sure >> >> it does import fine when XCP is on bare metal >> >> >> >> >> Regards, >> >> Flash. >> _______________________________________________ >> Xen-users mailing list >> Xen-users@lists.xensource.com >> http://lists.xensource.com/xen-users >> >> >> > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users