Priyadarsan Roy
2010-Nov-01 15:39 UTC
[Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
Hi, I am trying to install Xen 4.0 unstable and then get my dom0 working from http://xenbits.xen.org/linux-2.6.18-xen.hg . So far installation for Xen unstable went fine. But when I try to compile the kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg and then boot to that kernel I get the error Error:13 Invalid or unsupported executable format. I am using Debian 5(lenny) .The steps I used to compile the kernel are as given below make menuconfig make -j4 make modules_install install chmod g-s /usr/src -R make deb-pkg dpkg -i ../linux-2.6.18.8_2.6.18.8_amd64.deb depmod 2.6.18.8 update-initramfs -c -k 2.6.18.8 update-grub Any help will be appreciated. Regards, Roy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Priyadarsan Roy
2010-Nov-01 17:19 UTC
[Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
Hi, I am trying to install Xen 4.0 unstable and then get my dom0 working from http://xenbits.xen.org/linux-2.6.18-xen.hg . So far installation for Xen unstable went fine. But when I try to compile the kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg and then boot to that kernel I get the error Error:13 Invalid or unsupported executable format. I am using Debian 5(lenny) .The steps I used to compile the kernel are as given below make menuconfig make -j4 make modules_install install chmod g-s /usr/src -R make deb-pkg dpkg -i ../linux-2.6.18.8_2.6.18.8_amd64.deb depmod 2.6.18.8 update-initramfs -c -k 2.6.18.8 update-grub Any help will be appreciated. Regards, Roy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
David Cemin
2010-Nov-01 17:29 UTC
Re: [Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
I usually get this error when the ext3 module is not compiled as a built in module or it isnt loaded by the bootloader. Try to double check if you are loading your file system module regards -- David 2010/11/1 Priyadarsan Roy <priyadarsanroy@gmail.com>> > Hi, > > I am trying to install Xen 4.0 unstable and then get my dom0 working from > http://xenbits.xen.org/linux-2.6.18-xen.hg . > > So far installation for Xen unstable went fine. But when I try to compile > the kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg and then boot > to that kernel I get the error > > Error:13 Invalid or unsupported executable format. > > I am using Debian 5(lenny) .The steps I used to compile the kernel are as > given below > > > make menuconfig > make -j4 > make modules_install install > chmod g-s /usr/src -R > make deb-pkg > dpkg -i ../linux-2.6.18.8_2.6.18.8_amd64.deb > depmod 2.6.18.8 > update-initramfs -c -k 2.6.18.8 > update-grub > > Any help will be appreciated. > > Regards, > Roy > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >-- David Cemin mobile: +55 51 93523097 home: +55 51 32763785 email: davidcemin@gmail.com _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Priyadarsan Roy
2010-Nov-01 18:12 UTC
Re: [Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
What you mentioned was right ext3 was not part of the built in module. I now recompiled it with the built in option. But the problem still persists the same error. On Mon, Nov 1, 2010 at 10:59 PM, David Cemin <davidcemin@gmail.com> wrote:> I usually get this error when the ext3 module is not compiled as a built in > module or it isnt loaded by the bootloader. Try to double check if you are > loading your file system module > > regards > > -- > David > > 2010/11/1 Priyadarsan Roy <priyadarsanroy@gmail.com> > >> >> Hi, >> >> I am trying to install Xen 4.0 unstable and then get my dom0 working from >> http://xenbits.xen.org/linux-2.6.18-xen.hg . >> >> So far installation for Xen unstable went fine. But when I try to compile >> the kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg and then boot >> to that kernel I get the error >> >> Error:13 Invalid or unsupported executable format. >> >> I am using Debian 5(lenny) .The steps I used to compile the kernel are as >> given below >> >> >> make menuconfig >> make -j4 >> make modules_install install >> chmod g-s /usr/src -R >> make deb-pkg >> dpkg -i ../linux-2.6.18.8_2.6.18.8_amd64.deb >> depmod 2.6.18.8 >> update-initramfs -c -k 2.6.18.8 >> update-grub >> >> Any help will be appreciated. >> >> Regards, >> Roy >> >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@lists.xensource.com >> http://lists.xensource.com/xen-users >> > > > > -- > David Cemin > mobile: +55 51 93523097 > home: +55 51 32763785 > email: davidcemin@gmail.com >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
David Cemin
2010-Nov-01 18:16 UTC
Re: [Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
please, post here your grub entry. regards. -- David 2010/11/1 Priyadarsan Roy <priyadarsanroy@gmail.com>> > What you mentioned was right ext3 was not part of the built in module. I > now recompiled it with the built in option. But the problem still persists > the same error. > > > On Mon, Nov 1, 2010 at 10:59 PM, David Cemin <davidcemin@gmail.com> wrote: > >> I usually get this error when the ext3 module is not compiled as a built >> in module or it isnt loaded by the bootloader. Try to double check if you >> are loading your file system module >> >> regards >> >> -- >> David >> >> 2010/11/1 Priyadarsan Roy <priyadarsanroy@gmail.com> >> >>> >>> Hi, >>> >>> I am trying to install Xen 4.0 unstable and then get my dom0 working from >>> http://xenbits.xen.org/linux-2.6.18-xen.hg . >>> >>> So far installation for Xen unstable went fine. But when I try to compile >>> the kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg and then boot >>> to that kernel I get the error >>> >>> Error:13 Invalid or unsupported executable format. >>> >>> I am using Debian 5(lenny) .The steps I used to compile the kernel are as >>> given below >>> >>> >>> make menuconfig >>> make -j4 >>> make modules_install install >>> chmod g-s /usr/src -R >>> make deb-pkg >>> dpkg -i ../linux-2.6.18.8_2.6.18.8_amd64.deb >>> depmod 2.6.18.8 >>> update-initramfs -c -k 2.6.18.8 >>> update-grub >>> >>> Any help will be appreciated. >>> >>> Regards, >>> Roy >>> >>> >>> _______________________________________________ >>> Xen-users mailing list >>> Xen-users@lists.xensource.com >>> http://lists.xensource.com/xen-users >>> >> >> >> >> -- >> David Cemin >> mobile: +55 51 93523097 >> home: +55 51 32763785 >> email: davidcemin@gmail.com >> > >-- David Cemin mobile: +55 51 93523097 home: +55 51 32763785 email: davidcemin@gmail.com _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Priyadarsan Roy
2010-Nov-01 18:19 UTC
Re: [Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
title Xen 4.1-unstable / Debian GNU/Linux, kernel 2.6.18.8 root (hd0,0) kernel /boot/xen-4.1-unstable.gz module /boot/vmlinuz-2.6.18.8 root=/dev/sda1 ro console=tty0 module /boot/initrd.img-2.6.18.8 title Debian GNU/Linux, kernel 2.6.26-2-amd64 root (hd0,0) kernel /boot/vmlinuz-2.6.26-2-amd64 root=/dev/sda1 ro quiet initrd /boot/initrd.img-2.6.26-2-amd64 title Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode) root (hd0,0) kernel /boot/vmlinuz-2.6.26-2-amd64 root=/dev/sda1 ro single initrd /boot/initrd.img-2.6.26-2-amd64 title Debian GNU/Linux, kernel 2.6.18.8 root (hd0,0) kernel /boot/vmlinuz-2.6.18.8 root=/dev/sda1 ro quiet initrd /boot/initrd.img-2.6.18.8 title Debian GNU/Linux, kernel 2.6.18.8 (single-user mode) root (hd0,0) kernel /boot/vmlinuz-2.6.18.8 root=/dev/sda1 ro single On Mon, Nov 1, 2010 at 11:46 PM, David Cemin <davidcemin@gmail.com> wrote:> please, post here your grub entry. > > regards. > > -- > David > > 2010/11/1 Priyadarsan Roy <priyadarsanroy@gmail.com> > >> >> What you mentioned was right ext3 was not part of the built in module. I >> now recompiled it with the built in option. But the problem still persists >> the same error. >> >> >> On Mon, Nov 1, 2010 at 10:59 PM, David Cemin <davidcemin@gmail.com>wrote: >> >>> I usually get this error when the ext3 module is not compiled as a built >>> in module or it isnt loaded by the bootloader. Try to double check if you >>> are loading your file system module >>> >>> regards >>> >>> -- >>> David >>> >>> 2010/11/1 Priyadarsan Roy <priyadarsanroy@gmail.com> >>> >>>> >>>> Hi, >>>> >>>> I am trying to install Xen 4.0 unstable and then get my dom0 working >>>> from http://xenbits.xen.org/linux-2.6.18-xen.hg . >>>> >>>> So far installation for Xen unstable went fine. But when I try to >>>> compile the kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg and >>>> then boot to that kernel I get the error >>>> >>>> Error:13 Invalid or unsupported executable format. >>>> >>>> I am using Debian 5(lenny) .The steps I used to compile the kernel are >>>> as given below >>>> >>>> >>>> make menuconfig >>>> make -j4 >>>> make modules_install install >>>> chmod g-s /usr/src -R >>>> make deb-pkg >>>> dpkg -i ../linux-2.6.18.8_2.6.18.8_amd64.deb >>>> depmod 2.6.18.8 >>>> update-initramfs -c -k 2.6.18.8 >>>> update-grub >>>> >>>> Any help will be appreciated. >>>> >>>> Regards, >>>> Roy >>>> >>>> >>>> _______________________________________________ >>>> Xen-users mailing list >>>> Xen-users@lists.xensource.com >>>> http://lists.xensource.com/xen-users >>>> >>> >>> >>> >>> -- >>> David Cemin >>> mobile: +55 51 93523097 >>> home: +55 51 32763785 >>> email: davidcemin@gmail.com >>> >> >> > > > -- > David Cemin > mobile: +55 51 93523097 > home: +55 51 32763785 > email: davidcemin@gmail.com >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Todd Deshane
2010-Nov-01 19:01 UTC
Re: [Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
On Mon, Nov 1, 2010 at 11:39 AM, Priyadarsan Roy <priyadarsanroy@gmail.com> wrote:> Error:13 Invalid or unsupported executable format.Are you trying to boot a 64 bit kernel on a 32 bit system? Thanks, Todd -- Todd Deshane http://todddeshane.net http://runningxen.com _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Priyadarsan Roy
2010-Nov-01 19:08 UTC
Re: [Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
No I installed a 64 bit version of Debian. And so did I compile from the same system. On Tue, Nov 2, 2010 at 12:31 AM, Todd Deshane <deshantm@gmail.com> wrote:> On Mon, Nov 1, 2010 at 11:39 AM, Priyadarsan Roy > <priyadarsanroy@gmail.com> wrote: > > Error:13 Invalid or unsupported executable format. > > Are you trying to boot a 64 bit kernel on a 32 bit system? > > Thanks, > Todd > > -- > Todd Deshane > http://todddeshane.net > http://runningxen.com >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Priyadarsan Roy
2010-Nov-01 19:51 UTC
Re: [Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
One strange thing I notice is when I do file on the kernels I get as below snomdom0:/boot# file vmlinuz-2.6.* vmlinuz-2.6.18.8: gzip compressed data, from Unix, last modified: Mon Nov 1 23:28:02 2010, max compression vmlinuz-2.6.26-2-amd64: Linux kernel x86 boot executable RO-rootFS, root_dev 0x900, swap_dev 0x1, Normal VGA And no I have installed a 64 bit Linux and also compiled from the same system. On Tue, Nov 2, 2010 at 12:38 AM, Priyadarsan Roy <priyadarsanroy@gmail.com>wrote:> No I installed a 64 bit version of Debian. And so did I compile from the > same system. > > On Tue, Nov 2, 2010 at 12:31 AM, Todd Deshane <deshantm@gmail.com> wrote: > >> On Mon, Nov 1, 2010 at 11:39 AM, Priyadarsan Roy >> <priyadarsanroy@gmail.com> wrote: >> > Error:13 Invalid or unsupported executable format. >> >> Are you trying to boot a 64 bit kernel on a 32 bit system? >> >> Thanks, >> Todd >> >> -- >> Todd Deshane >> http://todddeshane.net >> http://runningxen.com >> > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
David Cemin
2010-Nov-03 14:45 UTC
Re: [Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
Hello, did you manage to solve your problem ? 2010/11/1 Priyadarsan Roy <priyadarsanroy@gmail.com>> > One strange thing I notice is when I do file on the kernels I get as below > > snomdom0:/boot# file vmlinuz-2.6.* > vmlinuz-2.6.18.8: gzip compressed data, from Unix, last modified: Mon > Nov 1 23:28:02 2010, max compression > vmlinuz-2.6.26-2-amd64: Linux kernel x86 boot executable RO-rootFS, > root_dev 0x900, swap_dev 0x1, Normal VGA > > And no I have installed a 64 bit Linux and also compiled from the same > system. > > On Tue, Nov 2, 2010 at 12:38 AM, Priyadarsan Roy <priyadarsanroy@gmail.com > > wrote: > >> No I installed a 64 bit version of Debian. And so did I compile from the >> same system. >> >> On Tue, Nov 2, 2010 at 12:31 AM, Todd Deshane <deshantm@gmail.com> wrote: >> >>> On Mon, Nov 1, 2010 at 11:39 AM, Priyadarsan Roy >>> <priyadarsanroy@gmail.com> wrote: >>> > Error:13 Invalid or unsupported executable format. >>> >>> Are you trying to boot a 64 bit kernel on a 32 bit system? >>> >>> Thanks, >>> Todd >>> >>> -- >>> Todd Deshane >>> http://todddeshane.net >>> http://runningxen.com >>> >> >> > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >-- David Cemin mobile: +55 51 93523097 home: +55 51 32763785 email: davidcemin@gmail.com _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Priyadarsan Roy
2010-Nov-03 20:22 UTC
Re: [Xen-users] Trying to compile linux kernel from http://xenbits.xen.org/linux-2.6.18-xen.hg .
Nope problem still persists. Tried recompiling the kernel even today. On Wed, Nov 3, 2010 at 8:15 PM, David Cemin <davidcemin@gmail.com> wrote:> Hello, > > did you manage to solve your problem ? > > 2010/11/1 Priyadarsan Roy <priyadarsanroy@gmail.com> > >> >> One strange thing I notice is when I do file on the kernels I get as below >> >> snomdom0:/boot# file vmlinuz-2.6.* >> vmlinuz-2.6.18.8: gzip compressed data, from Unix, last modified: >> Mon Nov 1 23:28:02 2010, max compression >> vmlinuz-2.6.26-2-amd64: Linux kernel x86 boot executable RO-rootFS, >> root_dev 0x900, swap_dev 0x1, Normal VGA >> >> And no I have installed a 64 bit Linux and also compiled from the same >> system. >> >> On Tue, Nov 2, 2010 at 12:38 AM, Priyadarsan Roy < >> priyadarsanroy@gmail.com> wrote: >> >>> No I installed a 64 bit version of Debian. And so did I compile from the >>> same system. >>> >>> On Tue, Nov 2, 2010 at 12:31 AM, Todd Deshane <deshantm@gmail.com>wrote: >>> >>>> On Mon, Nov 1, 2010 at 11:39 AM, Priyadarsan Roy >>>> <priyadarsanroy@gmail.com> wrote: >>>> > Error:13 Invalid or unsupported executable format. >>>> >>>> Are you trying to boot a 64 bit kernel on a 32 bit system? >>>> >>>> Thanks, >>>> Todd >>>> >>>> -- >>>> Todd Deshane >>>> http://todddeshane.net >>>> http://runningxen.com >>>> >>> >>> >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@lists.xensource.com >> http://lists.xensource.com/xen-users >> > > > > -- > David Cemin > mobile: +55 51 93523097 > home: +55 51 32763785 > email: davidcemin@gmail.com >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users