Re: [Xen-users] Re: Xen networking guide

Birger Brunswiek
2006-05-02T11:10:31Z

> I actually try to find out where exactly I have to change something to bind
> the bridge to eth1 instead of eth0 without hacking the scripts itself...

A short look into network-bridge, xen-script-common.sh and xend-config.sxp will
tell you that you have to say (network-script ''network-bridge
netdev=eth1'') in
xend-config.sxp to do that. Most of the documentation is in the network-bridge
script itself.