Goncalo Gomes
2011-Mar-24 17:39 UTC
[Xen-devel] Xen 4.2 unstable + Jeremy''s stable/2.6.32.x
I''m trying to setup an environment based on Lenny x86_64 + Xen4 Jeremy''s stable 2.6.32.x tree. I can see Xen booting up from the serial console (logged and attached as dt29boot.log), however, it stops right after a number of "PCI add device (...)" lines. Not sure if relevant but as a part of my attempt at troubleshooting I switched into Xen''s serial input by pressing ctrl+a three times and subsequently pressing ''Q''. Strangely, this seems to result in a list of PCI devices that is larger than the number of reportedly added PCI devices by Xen. Is this expected? Any alternate hints and/or suggestions would be fairly welcome. I''m attaching some relevant information about the HW in question. Goncalo grub entry title Xen 4.2 unstable / 2.6.32.33 root (hd0,0) kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc console=hvc0 earlyprintk=xen module /boot/initrd-xen _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Konrad Rzeszutek Wilk
2011-Mar-25 14:49 UTC
Re: [Xen-devel] Xen 4.2 unstable + Jeremy''s stable/2.6.32.x
On Thu, Mar 24, 2011 at 05:39:50PM +0000, Goncalo Gomes wrote:> I''m trying to setup an environment based on Lenny x86_64 + Xen4 Jeremy''s > stable 2.6.32.x tree. I can see Xen booting up from the serial console > (logged and attached as dt29boot.log), however, it stops right after a > number of "PCI add device (...)" lines. > > Not sure if relevant but as a part of my attempt at troubleshooting I > switched into Xen''s serial input by pressing ctrl+a three times and > subsequently pressing ''Q''. Strangely, this seems to result in a list of > PCI devices that is larger than the number of reportedly added PCI > devices by Xen. Is this expected?No., Those "ff" look strange.> > Any alternate hints and/or suggestions would be fairly welcome. I''m > attaching some relevant information about the HW in question.Try adding ''debug loglevel=10 earlyprintk=xenboot'' on the Linux command line.> > Goncalo > > > grub entry > > title Xen 4.2 unstable / 2.6.32.33 > root (hd0,0) > kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring > module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc > console=hvc0 earlyprintk=xen > module /boot/initrd-xen > > >> Script started on Thu 24 Mar 2011 16:29:06 GMT > goncalog@eire:~$ xenuse -t dt29 > [Enter `^Ec?'' for help] > [7;3H Xen 4.2 unstable / 2.6.32.33 [7;75H[6;3H Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode) [6;75H[6;3H Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode) [6;75H[7;3H Xen 4.2 unstable / 2.6.32.33 [7;75H[H[J Booting ''Xen 4.2 unstable / 2.6.32.33'' > > root (hd0,0) > Filesystem type is ext2fs, partition type 0x83 > kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring > [Multiboot-elf, <0x100000:0x188818:0x4c7e8>, shtab=0x2d5078, entry=0x100000] > module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc console=hv > c0 earlyprintk=xen > [Multiboot-module @ 0x2d6000, 0x23de30 bytes] > module /boot/initrd-xen > [Multiboot-module @ 0x514000, 0x12d7a00 bytes] > > __ __ _ _ _ ___ __ > \ \/ /___ _ __ | || | / | / _ \ _ __ ___ / /_ _ __ _ __ ___ > \ // _ \ ''_ \ | || |_ | || | | |__| ''__/ __| ''_ \ __| ''_ \| ''__/ _ \ > / \ __/ | | | |__ _|| || |_| |__| | | (__| (_) |__| |_) | | | __/ > /_/\_\___|_| |_| |_|(_)_(_)___/ |_| \___|\___/ | .__/|_| \___| > |_| > (XEN) Xen version 4.1.0-rc6-pre (scara@) (gcc version 4.5.1 20100907 (Red Hat 4.5.1-3) (GCC) ) Thu Feb 24 13:39:16 GMT 2011 > (XEN) Latest ChangeSet: Thu Feb 24 09:33:19 2011 +0000 22947:598d1fc295b6 > (XEN) Bootloader: GNU GRUB 0.97 > (XEN) Command line: com1=115200,8n1 console=com1,vga console_to_ring > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > (XEN) EDID info not retrieved because no DDC retrieval method detected > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009e000 (usable) > (XEN) 0000000000100000 - 00000000bf699000 (usable) > (XEN) 00000000bf699000 - 00000000bf6af000 (reserved) > (XEN) 00000000bf6af000 - 00000000bf6ce000 (ACPI data) > (XEN) 00000000bf6ce000 - 00000000c0000000 (reserved) > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > (XEN) 00000000fe000000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000240000000 (usable) > (XEN) ACPI: RSDP 000F0AA0, 0024 (r2 DELL ) > (XEN) ACPI: XSDT 000F0BA0, 008C (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: FACP BF6C3BB4, 00F4 (r3 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: DSDT BF6AF000, 3E43 (r1 DELL PE_SC3 1 INTL 20050624) > (XEN) ACPI: FACS BF6C6000, 0040 > (XEN) ACPI: APIC BF6C3478, 0152 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: SPCR BF6C35CC, 0050 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: HPET BF6C3620, 0038 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: DMAR BF6C365C, 00A8 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: MCFG BF6C3850, 003C (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: WD__ BF6C3890, 0134 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: SLIC BF6C39C8, 0024 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: ERST BF6B2FC4, 0270 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: HEST BF6B3234, 03A8 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: BERT BF6B2E44, 0030 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: EINJ BF6B2E74, 0150 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: TCPA BF6C3B4C, 0064 (r2 DELL PE_SC3 1 DELL 1) > (XEN) System RAM: 8182MB (8378588kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000240000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000fe710 > (XEN) DMI 2.6 present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[bf6c600c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > (XEN) Processor #2 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > (XEN) Processor #4 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > (XEN) Processor #6 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) > (XEN) Processor #1 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) > (XEN) Processor #3 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) > (XEN) Processor #5 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) > (XEN) Processor #7 7:14 APIC version 21 > (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) > (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: MCFG area at e0000000 reserved in E820 > (XEN) ERST table is invalid > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2660.049 MHz processor. > (XEN) Initing memory sharing. > (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 > (XEN) Intel machine check reporting enabled > (XEN) Intel VT-d Snoop Control enabled. > (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. > (XEN) Intel VT-d Queued Invalidation enabled. > (XEN) Intel VT-d Interrupt Remapping not enabled. > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Platform timer is 14.318MHz HPET > XEN) Allocated console ring of 64 KiB. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Extended Page Tables (EPT) > (XEN) - Virtual-Processor Identifiers (VPID) > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) EPT supports 2MB super page. > (XEN) HVM: ASIDs enabled. > (XEN) HVM: VMX enabled > (XEN) HVM: Hardware Assisted Paging detected. > (XEN) Brought up 8 CPUs > (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x404000 > (XEN) elf_parse_binary: phdr: paddr=0x1404000 memsz=0x850d0 > (XEN) elf_parse_binary: phdr: paddr=0x148a000 memsz=0x888 > (XEN) elf_parse_binary: phdr: paddr=0x148b000 memsz=0x14e98 > (XEN) elf_parse_binary: phdr: paddr=0x14a0000 memsz=0x268000 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1708000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff814a0200 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 > (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xffffffff80000000 > (XEN) virt_kstart = 0xffffffff81000000 > (XEN) virt_kend = 0xffffffff81708000 > (XEN) virt_entry = 0xffffffff814a0200 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1708000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000234000000->0000000238000000 (2012036 pages to be allocated) > (XEN) Init. ramdisk: 000000023ed28000->000000023ffffa00 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff81708000 > (XEN) Init. ramdisk: ffffffff81708000->ffffffff829dfa00 > (XEN) Phys-Mach map: ffffffff829e0000->ffffffff839632e0 > (XEN) Start info: ffffffff83964000->ffffffff839644b4 > (XEN) Page tables: ffffffff83965000->ffffffff83986000 > (XEN) Boot stack: ffffffff83986000->ffffffff83987000 > (XEN) TOTAL: ffffffff80000000->ffffffff83c00000 > (XEN) ENTRY ADDRESS: ffffffff814a0200 > (XEN) Dom0 has maximum 8 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81404000 > (XEN) elf_load_binary: phdr 1 at 0xffffffff81404000 -> 0xffffffff814890d0 > (XEN) elf_load_binary: phdr 2 at 0xffffffff8148a000 -> 0xffffffff8148a888 > (XEN) elf_load_binary: phdr 3 at 0xffffffff8148b000 -> 0xffffffff8149fe98 > (XEN) elf_load_binary: phdr 4 at 0xffffffff814a0000 -> 0xffffffff81530000 > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen) > (XEN) Freed 228kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > (XEN) PCI add device 00:00.0 > (XEN) PCI add device 00:03.0 > (XEN) PCI add device 00:05.0 > (XEN) PCI add device 00:08.0 > (XEN) PCI add device 00:08.1 > (XEN) PCI add device 00:08.2 > (XEN) PCI add device 00:08.3 > (XEN) PCI add device 00:10.0 > (XEN) PCI add device 00:10.1 > (XEN) PCI add device 00:1a.0 > (XEN) PCI add device 00:1c.0 > (XEN) PCI add device 00:1c.4 > (XEN) PCI add device 00:1d.0 > (XEN) PCI add device 00:1e.0 > (XEN) PCI add device 00:1f.0 > (XEN) PCI add device 00:1f.2 > (XEN) PCI add device 00:1f.5 > (XEN) PCI add device 03:00.0 > (XEN) PCI add device 02:00.0 > (XEN) PCI add device 02:00.1 > (XEN) PCI add device 01:03.0 > (XEN) *** Serial input -> Xen (type ''CTRL-a'' three times to switch input to DOM0) > (XEN) ==== PCI devices ===> (XEN) ff:05.3 - dom 0 - MSIs < > > (XEN) ff:05.2 - dom 0 - MSIs < > > (XEN) ff:05.1 - dom 0 - MSIs < > > (XEN) ff:05.0 - dom 0 - MSIs < > > (XEN) ff:04.3 - dom 0 - MSIs < > > (XEN) ff:04.2 - dom 0 - MSIs < > > (XEN) ff:04.1 - dom 0 - MSIs < > > (XEN) ff:04.0 - dom 0 - MSIs < > > (XEN) ff:03.4 - dom 0 - MSIs < > > (XEN) ff:03.2 - dom 0 - MSIs < > > (XEN) ff:03.1 - dom 0 - MSIs < > > (XEN) ff:03.0 - dom 0 - MSIs < > > (XEN) ff:02.1 - dom 0 - MSIs < > > (XEN) ff:02.0 - dom 0 - MSIs < > > (XEN) ff:00.1 - dom 0 - MSIs < > > (XEN) ff:00.0 - dom 0 - MSIs < > > (XEN) 03:00.0 - dom 0 - MSIs < > > (XEN) 02:00.1 - dom 0 - MSIs < > > (XEN) 02:00.0 - dom 0 - MSIs < > > (XEN) 01:03.0 - dom 0 - MSIs < > > (XEN) 00:1f.5 - dom 0 - MSIs < > > (XEN) 00:1f.2 - dom 0 - MSIs < > > (XEN) 00:1f.0 - dom 0 - MSIs < > > (XEN) 00:1e.0 - dom 0 - MSIs < > > (XEN) 00:1d.0 - dom 0 - MSIs < > > (XEN) 00:1c.4 - dom 0 - MSIs < 36 > > (XEN) 00:1c.0 - dom 0 - MSIs < 35 > > (XEN) 00:1a.0 - dom 0 - MSIs < > > (XEN) 00:10.1 - dom 0 - MSIs < > > (XEN) 00:10.0 - dom 0 - MSIs < > > (XEN) 00:08.3 - dom 0 - MSIs < > > (XEN) 00:08.2 - dom 0 - MSIs < > > (XEN) 00:08.1 - dom 0 - MSIs < > > (XEN) 00:08.0 - dom 0 - MSIs < > > (XEN) 00:05.0 - dom 0 - MSIs < 34 > > (XEN) 00:03.0 - dom 0 - MSIs < 33 > > (XEN) 00:00.0 - dom 0 - MSIs < > > [disconnect] > Script done on Thu 24 Mar 2011 16:30:23 GMT> # dmidecode 2.9 > SMBIOS 2.6 present. > 66 structures occupying 3175 bytes. > Table at 0xBF79C000. > > Handle 0xDA00, DMI type 218, 11 bytes > OEM-specific Type > Header and Data: > DA 0B 00 DA B2 00 17 00 0E 20 00 > > Handle 0x0000, DMI type 0, 24 bytes > BIOS Information > Vendor: Dell Inc. > Version: 1.1.5 > Release Date: 05/24/2010 > Address: 0xF0000 > Runtime Size: 64 kB > ROM Size: 4096 kB > Characteristics: > ISA is supported > PCI is supported > PNP is supported > BIOS is upgradeable > BIOS shadowing is allowed > Boot from CD is supported > Selectable boot is supported > EDD is supported > Japanese floppy for Toshiba 1.2 MB is supported (int 13h) > 5.25"/360 KB floppy services are supported (int 13h) > 5.25"/1.2 MB floppy services are supported (int 13h) > 3.5"/720 KB floppy services are supported (int 13h) > 8042 keyboard services are supported (int 9h) > Serial services are supported (int 14h) > CGA/mono video services are supported (int 10h) > ACPI is supported > USB legacy is supported > BIOS boot specification is supported > Function key-initiated network boot is supported > Targeted content distribution is supported > BIOS Revision: 1.1 > > Handle 0x0100, DMI type 1, 27 bytes > System Information > Manufacturer: Dell Inc. > Product Name: PowerEdge R310 > Version: Not Specified > Serial Number: 7V8CW4J > UUID: 44454C4C-5600-1038-8043-B7C04F57344A > Wake-up Type: Power Switch > SKU Number: Not Specified > Family: Not Specified > > Handle 0x0200, DMI type 2, 9 bytes > Base Board Information > Manufacturer: Dell Inc. > Product Name: 05XKKK > Version: A00 > Serial Number: ..CN1374008H00Q0. > > Handle 0x0300, DMI type 3, 21 bytes > Chassis Information > Manufacturer: Dell Inc. > Type: Rack Mount Chassis > Lock: Present > Version: Not Specified > Serial Number: 7V8CW4J > Asset Tag: Not Specified > Boot-up State: Safe > Power Supply State: Safe > Thermal State: Safe > Security Status: Unknown > OEM Information: 0x00000000 > Height: 1 U > Number Of Power Cords: Unspecified > Contained Elements: 0 > > Handle 0x0400, DMI type 4, 40 bytes > Processor Information > Socket Designation: CPU1 > Type: Central Processor > Family: Xeon > Manufacturer: Intel > ID: E5 06 01 00 FF FB EB BF > Signature: Type 0, Family 6, Model 30, Stepping 5 > Flags: > FPU (Floating-point unit on-chip) > VME (Virtual mode extension) > DE (Debugging extension) > PSE (Page size extension) > TSC (Time stamp counter) > MSR (Model specific registers) > PAE (Physical address extension) > MCE (Machine check exception) > CX8 (CMPXCHG8 instruction supported) > APIC (On-chip APIC hardware supported) > SEP (Fast system call) > MTRR (Memory type range registers) > PGE (Page global enable) > MCA (Machine check architecture) > CMOV (Conditional move instruction supported) > PAT (Page attribute table) > PSE-36 (36-bit page size extension) > CLFSH (CLFLUSH instruction supported) > DS (Debug store) > ACPI (ACPI supported) > MMX (MMX technology supported) > FXSR (Fast floating-point save and restore) > SSE (Streaming SIMD extensions) > SSE2 (Streaming SIMD extensions 2) > SS (Self-snoop) > HTT (Hyper-threading technology) > TM (Thermal monitor supported) > PBE (Pending break enabled) > Version: Intel(R) Xeon(R) CPU X3450 @ 2.67GHz > Voltage: 1.2 V > External Clock: 4800 MHz > Max Speed: 3600 MHz > Current Speed: 2666 MHz > Status: Populated, Enabled > Upgrade: <OUT OF SPEC> > L1 Cache Handle: 0x0700 > L2 Cache Handle: 0x0701 > L3 Cache Handle: 0x0702 > Serial Number: Not Specified > Asset Tag: Not Specified > Part Number: Not Specified > Core Count: 4 > Core Enabled: 4 > Thread Count: 8 > Characteristics: > 64-bit capable > > Handle 0x0700, DMI type 7, 19 bytes > Cache Information > Socket Designation: Not Specified > Configuration: Enabled, Not Socketed, Level 1 > Operational Mode: Write Back > Location: Internal > Installed Size: 128 KB > Maximum Size: 128 KB > Supported SRAM Types: > Unknown > Installed SRAM Type: Unknown > Speed: Unknown > Error Correction Type: Single-bit ECC > System Type: Data > Associativity: 8-way Set-associative > > Handle 0x0701, DMI type 7, 19 bytes > Cache Information > Socket Designation: Not Specified > Configuration: Enabled, Not Socketed, Level 2 > Operational Mode: Write Back > Location: Internal > Installed Size: 1024 KB > Maximum Size: 2048 KB > Supported SRAM Types: > Unknown > Installed SRAM Type: Unknown > Speed: Unknown > Error Correction Type: Single-bit ECC > System Type: Unified > Associativity: 8-way Set-associative > > Handle 0x0702, DMI type 7, 19 bytes > Cache Information > Socket Designation: Not Specified > Configuration: Enabled, Not Socketed, Level 3 > Operational Mode: Write Back > Location: Internal > Installed Size: 8192 KB > Maximum Size: 8192 KB > Supported SRAM Types: > Unknown > Installed SRAM Type: Unknown > Speed: Unknown > Error Correction Type: Single-bit ECC > System Type: Unified > Associativity: 16-way Set-associative > > Handle 0x0800, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: Not Specified > Internal Connector Type: None > External Reference Designator: Not Specified > External Connector Type: DB-15 female > Port Type: Video Port > > Handle 0x0801, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: Not Specified > Internal Connector Type: None > External Reference Designator: Not Specified > External Connector Type: DB-15 female > Port Type: Video Port > > Handle 0x0802, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: Not Specified > Internal Connector Type: None > External Reference Designator: Not Specified > External Connector Type: Access Bus (USB) > Port Type: USB > > Handle 0x0803, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: Not Specified > Internal Connector Type: None > External Reference Designator: Not Specified > External Connector Type: Access Bus (USB) > Port Type: USB > > Handle 0x0804, DMI type 126, 9 bytes > Inactive > > Handle 0x0805, DMI type 126, 9 bytes > Inactive > > Handle 0x0806, DMI type 126, 9 bytes > Inactive > > Handle 0x0807, DMI type 126, 9 bytes > Inactive > > Handle 0x0808, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: Not Specified > Internal Connector Type: None > External Reference Designator: Not Specified > External Connector Type: Access Bus (USB) > Port Type: USB > > Handle 0x0809, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: Not Specified > Internal Connector Type: None > External Reference Designator: Not Specified > External Connector Type: Access Bus (USB) > Port Type: USB > > Handle 0x080A, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: INT_USB1 > Internal Connector Type: Access Bus (USB) > External Reference Designator: Not Specified > External Connector Type: None > Port Type: USB > > Handle 0x080B, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: INT_USB2 > Internal Connector Type: Access Bus (USB) > External Reference Designator: Not Specified > External Connector Type: None > Port Type: USB > > Handle 0x080C, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: INT_SATA1 > Internal Connector Type: SAS/SATA Plug Receptacle > External Reference Designator: Not Specified > External Connector Type: None > Port Type: SATA > > Handle 0x080D, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: INT_SATA2 > Internal Connector Type: SAS/SATA Plug Receptacle > External Reference Designator: Not Specified > External Connector Type: None > Port Type: SATA > > Handle 0x080E, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: INT_SATA3 > Internal Connector Type: SAS/SATA Plug Receptacle > External Reference Designator: Not Specified > External Connector Type: None > Port Type: SATA > > Handle 0x080F, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: INT_SATA4 > Internal Connector Type: SAS/SATA Plug Receptacle > External Reference Designator: Not Specified > External Connector Type: None > Port Type: SATA > > Handle 0x0810, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: INT_SATA5 > Internal Connector Type: SAS/SATA Plug Receptacle > External Reference Designator: Not Specified > External Connector Type: None > Port Type: SATA > > Handle 0x0811, DMI type 126, 9 bytes > Inactive > > Handle 0x0812, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: Not Specified > Internal Connector Type: None > External Reference Designator: Not Specified > External Connector Type: RJ-45 > Port Type: Network Port > > Handle 0x0813, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: Not Specified > Internal Connector Type: None > External Reference Designator: Not Specified > External Connector Type: RJ-45 > Port Type: Network Port > > Handle 0x0814, DMI type 8, 9 bytes > Port Connector Information > Internal Reference Designator: Not Specified > Internal Connector Type: None > External Reference Designator: Not Specified > External Connector Type: DB-9 male > Port Type: Serial Port 16550A Compatible > > Handle 0x0900, DMI type 9, 17 bytes > System Slot Information > Designation: PCIE1 > Type: x8 <OUT OF SPEC> > Current Usage: Available > Length: Long > Characteristics: > 3.3 V is provided > PME signal is supported > > Handle 0x0901, DMI type 9, 17 bytes > System Slot Information > Designation: PCIE2 > Type: x8 <OUT OF SPEC> > Current Usage: Available > Length: Long > Characteristics: > 3.3 V is provided > PME signal is supported > > Handle 0x0902, DMI type 126, 17 bytes > Inactive > > Handle 0x0903, DMI type 126, 17 bytes > Inactive > > Handle 0x0904, DMI type 126, 17 bytes > Inactive > > Handle 0x0A00, DMI type 10, 12 bytes > On Board Device 1 Information > Type: Video > Status: Enabled > Description: Embedded Matrox G200 Video > On Board Device 2 Information > Type: Ethernet > Status: Enabled > Description: Embedded Broadcom 5716 NIC 1 > On Board Device 3 Information > Type: Ethernet > Status: Enabled > Description: Embedded Broadcom 5716 NIC 2 > On Board Device 4 Information > Type: SAS Controller > Status: Enabled > Description: Integrated SAS Controller > > Handle 0x0B00, DMI type 11, 5 bytes > OEM Strings > String 1: Dell System > String 2: 5[0000] > > Handle 0x7E00, DMI type 126, 170 bytes > Inactive > > Handle 0x0C00, DMI type 12, 5 bytes > System Configuration Options > Option 1: NVRAM_CLR: Clear user settable NVRAM areas and set defaults > Option 2: PWRD_EN: Close to enable password > > Handle 0x0D00, DMI type 13, 22 bytes > BIOS Language Information > Installable Languages: 1 > en|US|iso8859-1 > Currently Installed Language: en|US|iso8859-1 > > Handle 0x1000, DMI type 16, 15 bytes > Physical Memory Array > Location: System Board Or Motherboard > Use: System Memory > Error Correction Type: Multi-bit ECC > Maximum Capacity: 32 GB > Error Information Handle: Not Provided > Number Of Devices: 6 > > Handle 0x1100, DMI type 17, 28 bytes > Memory Device > Array Handle: 0x1000 > Error Information Handle: Not Provided > Total Width: 72 bits > Data Width: 64 bits > Size: 2048 MB > Form Factor: DIMM > Set: 1 > Locator: DIMM_A1 > Bank Locator: Not Specified > Type: <OUT OF SPEC> > Type Detail: Synchronous > Speed: 1333 MHz (0.8 ns) > Manufacturer: 00AD000080AD > Serial Number: 0FA35777 > Asset Tag: 01103000 > Part Number: HMT125U7TFR8C-H9 > > Handle 0x1101, DMI type 17, 28 bytes > Memory Device > Array Handle: 0x1000 > Error Information Handle: Not Provided > Total Width: 72 bits > Data Width: 64 bits > Size: 2048 MB > Form Factor: DIMM > Set: 1 > Locator: DIMM_A2 > Bank Locator: Not Specified > Type: <OUT OF SPEC> > Type Detail: Synchronous > Speed: 1333 MHz (0.8 ns) > Manufacturer: 00AD000080AD > Serial Number: 0F635782 > Asset Tag: 01103000 > Part Number: HMT125U7TFR8C-H9 > > Handle 0x1102, DMI type 17, 28 bytes > Memory Device > Array Handle: 0x1000 > Error Information Handle: Not Provided > Total Width: 72 bits > Data Width: 64 bits > Size: 2048 MB > Form Factor: DIMM > Set: 2 > Locator: DIMM_A3 > Bank Locator: Not Specified > Type: <OUT OF SPEC> > Type Detail: Synchronous > Speed: 1333 MHz (0.8 ns) > Manufacturer: 00AD000080AD > Serial Number: 0F23577E > Asset Tag: 01103000 > Part Number: HMT125U7TFR8C-H9 > > Handle 0x1103, DMI type 17, 28 bytes > Memory Device > Array Handle: 0x1000 > Error Information Handle: Not Provided > Total Width: 72 bits > Data Width: 64 bits > Size: 2048 MB > Form Factor: DIMM > Set: 2 > Locator: DIMM_A4 > Bank Locator: Not Specified > Type: <OUT OF SPEC> > Type Detail: Synchronous > Speed: 1333 MHz (0.8 ns) > Manufacturer: 00AD000080AD > Serial Number: 0F535115 > Asset Tag: 01103000 > Part Number: HMT125U7TFR8C-H9 > > Handle 0x1104, DMI type 17, 28 bytes > Memory Device > Array Handle: 0x1000 > Error Information Handle: Not Provided > Total Width: 72 bits > Data Width: 64 bits > Size: No Module Installed > Form Factor: DIMM > Set: 3 > Locator: DIMM_A5 > Bank Locator: Not Specified > Type: <OUT OF SPEC> > Type Detail: Synchronous > Speed: Unknown > Manufacturer: > Serial Number: > Asset Tag: > Part Number: > > Handle 0x1105, DMI type 17, 28 bytes > Memory Device > Array Handle: 0x1000 > Error Information Handle: Not Provided > Total Width: 72 bits > Data Width: 64 bits > Size: No Module Installed > Form Factor: DIMM > Set: 3 > Locator: DIMM_A6 > Bank Locator: Not Specified > Type: <OUT OF SPEC> > Type Detail: Synchronous > Speed: Unknown > Manufacturer: > Serial Number: > Asset Tag: > Part Number: > > Handle 0x1300, DMI type 19, 15 bytes > Memory Array Mapped Address > Starting Address: 0x00000000000 > Ending Address: 0x000BFFFFFFF > Range Size: 3 GB > Physical Array Handle: 0x1000 > Partition Width: 0 > > Handle 0x1301, DMI type 19, 15 bytes > Memory Array Mapped Address > Starting Address: 0x00100000000 > Ending Address: 0x0023FFFFFFF > Range Size: 5 GB > Physical Array Handle: 0x1000 > Partition Width: 0 > > Handle 0x2000, DMI type 32, 11 bytes > System Boot Information > Status: No errors detected > > Handle 0x2600, DMI type 38, 18 bytes > IPMI Device Information > Interface Type: KCS (Keyboard Control Style) > Specification Version: 2.0 > I2C Slave Address: 0x10 > NV Storage Device: Not Present > Base Address: 0x0000000000000CA8 (I/O) > Register Spacing: 32-bit Boundaries > > Handle 0x2900, DMI type 41, 11 bytes > Unknown Type > Header and Data: > 29 0B 00 29 01 85 01 00 00 02 00 > Strings: > Embedded NIC 1 > > Handle 0x2901, DMI type 41, 11 bytes > Unknown Type > Header and Data: > 29 0B 01 29 01 85 02 00 00 02 01 > Strings: > Embedded NIC 2 > > Handle 0x2902, DMI type 41, 11 bytes > Unknown Type > Header and Data: > 29 0B 02 29 01 8A 04 00 00 03 00 > Strings: > Integrated SAS > > Handle 0x2903, DMI type 126, 11 bytes > Inactive > > Handle 0x2904, DMI type 41, 11 bytes > Unknown Type > Header and Data: > 29 0B 04 29 01 83 04 00 00 01 18 > Strings: > Embedded Video > > Handle 0xD000, DMI type 208, 16 bytes > OEM-specific Type > Header and Data: > D0 10 00 D0 02 00 FE 00 A3 02 00 00 00 01 00 00 > > Handle 0xD200, DMI type 210, 12 bytes > OEM-specific Type > Header and Data: > D2 0C 00 D2 F8 03 04 03 06 80 04 05 > > Handle 0xD400, DMI type 212, 87 bytes > OEM-specific Type > Header and Data: > D4 57 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE > 01 43 00 11 FE 00 70 01 11 9F 20 6F 01 11 9F 00 > 00 00 11 9F 20 00 00 11 9F 00 31 40 11 FB 00 32 > 40 11 FB 04 9D 00 11 FD 02 9E 00 11 FD 00 9F 00 > 26 FE 01 A0 00 26 FE 00 28 40 26 DF 20 29 40 26 > DF 00 FF FF 00 00 00 > > Handle 0xD401, DMI type 212, 242 bytes > OEM-specific Type > Header and Data: > D4 F2 01 D4 70 00 71 00 03 40 5A 6D 5C 00 78 BF > 40 5D 00 78 BF 00 6C 01 57 FC 00 6B 01 57 FC 01 > 6A 01 57 FC 02 12 02 57 EF 00 11 02 57 EF 10 77 > 01 54 FC 00 78 01 54 FC 01 79 01 54 FC 02 7A 01 > 54 FC 03 33 40 54 CF 00 34 40 54 CF 10 35 40 54 > CF 20 36 40 54 CF 30 1A 40 54 FB 04 1B 40 54 FB > 00 1C 40 54 F7 08 1D 40 54 F7 00 43 40 58 DF 20 > 42 40 58 DF 00 24 40 58 BF 40 25 40 58 BF 00 6E > 00 58 FC 01 2D 00 58 FC 02 DA 01 58 FC 03 22 40 > 58 EF 10 23 40 58 EF 00 BB 00 58 F3 04 BC 00 58 > F3 08 DB 01 58 F3 0C 2D 02 55 FE 01 2E 02 55 FE > 00 D8 00 55 7F 80 D9 00 55 7F 00 54 02 56 DF 00 > 57 02 56 DF 20 4D 02 56 BF 00 4E 02 56 BF 40 2D > 01 56 7F 80 2E 01 56 7F 00 00 C0 5C 00 0A 03 C0 > 67 00 05 83 00 76 00 00 84 00 77 00 00 FF FF 00 > 00 00 > > Handle 0xD402, DMI type 212, 172 bytes > OEM-specific Type > Header and Data: > D4 AC 02 D4 72 00 73 00 00 40 5D 5E D3 00 00 00 > 02 D4 00 02 00 02 4A 01 46 BF 40 4B 01 46 BF 00 > 00 90 2C 00 00 01 90 2D 00 00 DE 00 63 FE 01 26 > 40 42 FE 01 27 40 42 FE 00 17 01 4A FE 00 18 01 > 4A FE 01 19 01 4A FD 00 1A 01 4A FD 02 1B 01 4A > FB 00 1C 01 4A FB 04 1D 01 4A F7 00 1E 01 4A F7 > 08 1F 01 44 FE 00 20 01 44 FE 01 00 00 44 FD 00 > 00 00 44 FD 02 35 01 4B FC 00 37 01 4B FC 01 39 > 01 4B FC 02 3B 01 4B F3 04 02 40 46 DF 00 01 40 > 46 DF 20 FC 01 45 BF 00 FD 01 45 BF 40 00 00 45 > 7F 80 00 00 45 7F 00 FF FF 00 00 00 > > Handle 0xD403, DMI type 212, 97 bytes > OEM-specific Type > Header and Data: > D4 61 03 D4 72 00 73 00 00 40 5D 5E D1 00 46 FE > 00 D2 00 46 FE 01 40 01 47 EF 10 41 01 47 EF 00 > EB 01 47 FD 00 EA 01 47 FD 02 33 02 47 F3 04 32 > 02 47 F3 08 31 02 47 F3 00 6E 02 47 F3 00 4B 02 > 47 DF 00 4C 02 47 DF 20 44 01 4E CF 00 45 01 4E > CF 10 4A 02 4E F3 04 0C 80 4E F3 08 FF FF 00 00 > 00 > > Handle 0xD800, DMI type 216, 9 bytes > OEM-specific Type > Header and Data: > D8 09 00 D8 01 02 01 00 00 > Strings: > MATROX > VGA/VBE BIOS, Version V3.8WO > > Handle 0xDE00, DMI type 222, 16 bytes > OEM-specific Type > Header and Data: > DE 10 00 DE 01 08 FF FF 00 00 00 00 00 00 00 01 > > Handle 0xE100, DMI type 225, 33 bytes > OEM-specific Type > Header and Data: > E1 21 00 E1 01 01 00 04 00 02 00 11 00 03 01 11 > 00 04 02 11 00 05 03 11 00 06 04 11 00 07 05 11 > 00 > Strings: > CPU.Socket.1 > DIMM.Socket.A1 > DIMM.Socket.A2 > DIMM.Socket.A3 > DIMM.Socket.A4 > DIMM.Socket.A5 > DIMM.Socket.A6 > > Handle 0x7F00, DMI type 127, 4 bytes > End Of Table >> 00:00.0 Host bridge: Intel Corporation Clarksfield/Lynnfield DMI (rev 11) > Subsystem: Dell Device 02a3 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable- > Address: 00000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [90] Express (v1) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Suprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [150] Access Controls <?> > Capabilities: [160] Vendor Specific Information <?> > > 00:03.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 1 (rev 11) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: Dell Device 02a3 > Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+ > Address: feeff00c Data: 4151 > Masking: 00000002 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Suprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # 1, PowerLimit 25.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Off, PwrInd Off, Power+ Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [150] Access Controls <?> > Capabilities: [160] Vendor Specific Information <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:05.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 3 (rev 11) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Subsystem: Dell Device 02a3 > Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+ > Address: feeff00c Data: 4159 > Masking: 00000002 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Suprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # 2, PowerLimit 25.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Off, PwrInd Off, Power+ Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [150] Access Controls <?> > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:08.0 System peripheral: Intel Corporation Clarksfield/Lynnfield System Management Registers (rev 11) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited > ClockPM- Suprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [100] Vendor Specific Information <?> > > 00:08.1 System peripheral: Intel Corporation Clarksfield/Lynnfield Semaphore and Scratchpad Registers (rev 11) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited > ClockPM- Suprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [100] Vendor Specific Information <?> > > 00:08.2 System peripheral: Intel Corporation Clarksfield/Lynnfield System Control and Status Registers (rev 11) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited > ClockPM- Suprise+ LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [100] Vendor Specific Information <?> > > 00:08.3 System peripheral: Intel Corporation Clarksfield/Lynnfield Miscellaneous Registers (rev 11) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:10.0 System peripheral: Intel Corporation Device d150 (rev 11) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:10.1 System peripheral: Intel Corporation Device d151 (rev 11) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI]) > Subsystem: Dell Device 02a3 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at df0fc000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCIe advanced features <?> > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > > 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000f000-0000ffff > Memory behind bridge: df100000-df2fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: feeff00c Data: 4161 > Capabilities: [90] Subsystem: Dell Device 02a3 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > Memory behind bridge: da000000-ddffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ FLReset- > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: feeff00c Data: 4169 > Capabilities: [90] Subsystem: Dell Device 02a3 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI]) > Subsystem: Dell Device 02a3 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at df0fe000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCIe advanced features <?> > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > Memory behind bridge: de000000-deffffff > Prefetchable memory behind bridge: 00000000d9800000-00000000d9ffffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Subsystem: Dell Device 02a3 > > 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) > Subsystem: Dell Device 02a3 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information <?> > > 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: Dell Device 02a3 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 20 > Region 0: I/O ports at eca0 [size=8] > Region 1: I/O ports at ec90 [size=4] > Region 2: I/O ports at eca8 [size=8] > Region 3: I/O ports at ec94 [size=4] > Region 4: I/O ports at ecc0 [size=16] > Region 5: I/O ports at ecd0 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] PCIe advanced features <?> > Kernel driver in use: ata_piix > Kernel modules: ata_generic, ata_piix, ide-pci-generic > > 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO]) > Subsystem: Dell Device 02a3 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 21 > Region 0: I/O ports at ecb0 [size=8] > Region 1: I/O ports at ec98 [size=4] > Region 2: I/O ports at ecb8 [size=8] > Region 3: I/O ports at ec9c [size=4] > Region 4: I/O ports at ece0 [size=16] > Region 5: I/O ports at ecf0 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [b0] PCIe advanced features <?> > Kernel driver in use: ata_piix > Kernel modules: ata_generic, ata_piix, ide-pci-generic > > 01:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 [Hermon] - Winbond/Nuvoton (rev 0a) (prog-if 00 [VGA controller]) > Subsystem: Dell Device 02a3 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 6 > Region 0: Memory at d9800000 (32-bit, prefetchable) [size=8M] > Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K] > Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M] > [virtual] Expansion ROM at de000000 [disabled] [size=64K] > Capabilities: [dc] Power Management version 1 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20) > Subsystem: Dell Device 02a3 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M] > Capabilities: [48] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data <?> > Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=9 > Vector table: BAR=0 offset=0000c000 > PBA: BAR=0 offset=0000e000 > Capabilities: [ac] Express (v2) Endpoint, MSI 00 > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [100] Device Serial Number 2a-88-52-fe-ff-2b-2b-84 > Capabilities: [110] Advanced Error Reporting <?> > Capabilities: [150] Power Budgeting <?> > Capabilities: [160] Virtual Channel <?> > Kernel driver in use: bnx2 > Kernel modules: bnx2 > > 02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20) > Subsystem: Dell Device 02a3 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M] > Capabilities: [48] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data <?> > Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [a0] MSI-X: Enable- Mask- TabSize=9 > Vector table: BAR=0 offset=0000c000 > PBA: BAR=0 offset=0000e000 > Capabilities: [ac] Express (v2) Endpoint, MSI 00 > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ > RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [100] Device Serial Number 2b-88-52-fe-ff-2b-2b-84 > Capabilities: [110] Advanced Error Reporting <?> > Capabilities: [150] Power Budgeting <?> > Capabilities: [160] Virtual Channel <?> > Kernel driver in use: bnx2 > Kernel modules: bnx2 > > 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) > Subsystem: Dell SAS 6/iR Integrated Blades RAID Controller > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 1275 > Region 0: I/O ports at fc00 [size=256] > Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K] > Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K] > Expansion ROM at df100000 [disabled] [size=1M] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [68] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- > Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ > Address: 00000000feeff00c Data: 4181 > Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1 > Vector table: BAR=1 offset=00002000 > PBA: BAR=1 offset=00003000 > Capabilities: [100] Advanced Error Reporting <?> > Kernel driver in use: mptsas > Kernel modules: mptsas >> _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Goncalo Gomes
2011-Mar-25 15:34 UTC
Re: [Xen-devel] Xen 4.2 unstable + Jeremy''s stable/2.6.32.x
On Fri, 2011-03-25 at 14:49 +0000, Konrad Rzeszutek Wilk wrote:> > Any alternate hints and/or suggestions would be fairly welcome. I''m > > attaching some relevant information about the HW in question. > > Try adding ''debug loglevel=10 earlyprintk=xenboot'' on the Linux command line.Thanks for the suggestions, but with these changes nothing substantially different comes up on the serial. It stops just after adding PCI 01:03.0 as before. Starting to suspect CONFIG_XEN_DOM0_PCI, as I''ve never enabled it before. Attaching .config from the Linux which I forgot in previous mail. Cheers, -Goncalo.> > > > Goncalo > > > > > > grub entry > > > > title Xen 4.2 unstable / 2.6.32.33 > > root (hd0,0) > > kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring > > module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc > > console=hvc0 earlyprintk=xen > > module /boot/initrd-xen > > > > > > > > > Script started on Thu 24 Mar 2011 16:29:06 GMT > > goncalog@eire:~$ xenuse -t dt29 > > [Enter `^Ec?'' for help] > > [7;3H Xen 4.2 unstable / 2.6.32.33 [7;75H[6;3H Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode) [6;75H[6;3H Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode) [6;75H[7;3H Xen 4.2 unstable / 2.6.32.33 [7;75H[H[J Booting ''Xen 4.2 unstable / 2.6.32.33'' > > > > root (hd0,0) > > Filesystem type is ext2fs, partition type 0x83 > > kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring > > [Multiboot-elf, <0x100000:0x188818:0x4c7e8>, shtab=0x2d5078, entry=0x100000] > > module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc console=hv > > c0 earlyprintk=xen > > [Multiboot-module @ 0x2d6000, 0x23de30 bytes] > > module /boot/initrd-xen > > [Multiboot-module @ 0x514000, 0x12d7a00 bytes] > > > > __ __ _ _ _ ___ __ > > \ \/ /___ _ __ | || | / | / _ \ _ __ ___ / /_ _ __ _ __ ___ > > \ // _ \ ''_ \ | || |_ | || | | |__| ''__/ __| ''_ \ __| ''_ \| ''__/ _ \ > > / \ __/ | | | |__ _|| || |_| |__| | | (__| (_) |__| |_) | | | __/ > > /_/\_\___|_| |_| |_|(_)_(_)___/ |_| \___|\___/ | .__/|_| \___| > > |_| > > (XEN) Xen version 4.1.0-rc6-pre (scara@) (gcc version 4.5.1 20100907 (Red Hat 4.5.1-3) (GCC) ) Thu Feb 24 13:39:16 GMT 2011 > > (XEN) Latest ChangeSet: Thu Feb 24 09:33:19 2011 +0000 22947:598d1fc295b6 > > (XEN) Bootloader: GNU GRUB 0.97 > > (XEN) Command line: com1=115200,8n1 console=com1,vga console_to_ring > > (XEN) Video information: > > (XEN) VGA is text mode 80x25, font 8x16 > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > > (XEN) EDID info not retrieved because no DDC retrieval method detected > > (XEN) Disc information: > > (XEN) Found 1 MBR signatures > > (XEN) Found 1 EDD information structures > > (XEN) Xen-e820 RAM map: > > (XEN) 0000000000000000 - 000000000009e000 (usable) > > (XEN) 0000000000100000 - 00000000bf699000 (usable) > > (XEN) 00000000bf699000 - 00000000bf6af000 (reserved) > > (XEN) 00000000bf6af000 - 00000000bf6ce000 (ACPI data) > > (XEN) 00000000bf6ce000 - 00000000c0000000 (reserved) > > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > > (XEN) 00000000fe000000 - 0000000100000000 (reserved) > > (XEN) 0000000100000000 - 0000000240000000 (usable) > > (XEN) ACPI: RSDP 000F0AA0, 0024 (r2 DELL ) > > (XEN) ACPI: XSDT 000F0BA0, 008C (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: FACP BF6C3BB4, 00F4 (r3 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: DSDT BF6AF000, 3E43 (r1 DELL PE_SC3 1 INTL 20050624) > > (XEN) ACPI: FACS BF6C6000, 0040 > > (XEN) ACPI: APIC BF6C3478, 0152 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: SPCR BF6C35CC, 0050 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: HPET BF6C3620, 0038 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: DMAR BF6C365C, 00A8 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: MCFG BF6C3850, 003C (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: WD__ BF6C3890, 0134 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: SLIC BF6C39C8, 0024 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: ERST BF6B2FC4, 0270 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: HEST BF6B3234, 03A8 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: BERT BF6B2E44, 0030 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: EINJ BF6B2E74, 0150 (r1 DELL PE_SC3 1 DELL 1) > > (XEN) ACPI: TCPA BF6C3B4C, 0064 (r2 DELL PE_SC3 1 DELL 1) > > (XEN) System RAM: 8182MB (8378588kB) > > (XEN) No NUMA configuration found > > (XEN) Faking a node at 0000000000000000-0000000240000000 > > (XEN) Domain heap initialised > > (XEN) found SMP MP-table at 000fe710 > > (XEN) DMI 2.6 present. > > (XEN) Using APIC driver default > > (XEN) ACPI: PM-Timer IO Port: 0x808 > > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > > (XEN) ACPI: wakeup_vec[bf6c600c], vec_size[20] > > (XEN) ACPI: Local APIC address 0xfee00000 > > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > > (XEN) Processor #0 7:14 APIC version 21 > > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > > (XEN) Processor #2 7:14 APIC version 21 > > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > > (XEN) Processor #4 7:14 APIC version 21 > > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > > (XEN) Processor #6 7:14 APIC version 21 > > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) > > (XEN) Processor #1 7:14 APIC version 21 > > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) > > (XEN) Processor #3 7:14 APIC version 21 > > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) > > (XEN) Processor #5 7:14 APIC version 21 > > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) > > (XEN) Processor #7 7:14 APIC version 21 > > (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) > > (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) > > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) > > (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > > (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 > > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > (XEN) ACPI: IRQ0 used by override. > > (XEN) ACPI: IRQ2 used by override. > > (XEN) ACPI: IRQ9 used by override. > > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > > (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 > > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > > (XEN) PCI: MCFG area at e0000000 reserved in E820 > > (XEN) ERST table is invalid > > (XEN) Using ACPI (MADT) for SMP configuration information > > (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > (XEN) Detected 2660.049 MHz processor. > > (XEN) Initing memory sharing. > > (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 > > (XEN) Intel machine check reporting enabled > > (XEN) Intel VT-d Snoop Control enabled. > > (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. > > (XEN) Intel VT-d Queued Invalidation enabled. > > (XEN) Intel VT-d Interrupt Remapping not enabled. > > (XEN) I/O virtualisation enabled > > (XEN) - Dom0 mode: Relaxed > > (XEN) ENABLING IO-APIC IRQs > > (XEN) -> Using new ACK method > > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > > (XEN) Platform timer is 14.318MHz HPET > > XEN) Allocated console ring of 64 KiB. > > (XEN) VMX: Supported advanced features: > > (XEN) - APIC MMIO access virtualisation > > (XEN) - APIC TPR shadow > > (XEN) - Extended Page Tables (EPT) > > (XEN) - Virtual-Processor Identifiers (VPID) > > (XEN) - Virtual NMI > > (XEN) - MSR direct-access bitmap > > (XEN) EPT supports 2MB super page. > > (XEN) HVM: ASIDs enabled. > > (XEN) HVM: VMX enabled > > (XEN) HVM: Hardware Assisted Paging detected. > > (XEN) Brought up 8 CPUs > > (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast > > (XEN) ACPI sleep modes: S3 > > (XEN) mcheck_poll: Machine check polling timer started. > > (XEN) *** LOADING DOMAIN 0 *** > > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x404000 > > (XEN) elf_parse_binary: phdr: paddr=0x1404000 memsz=0x850d0 > > (XEN) elf_parse_binary: phdr: paddr=0x148a000 memsz=0x888 > > (XEN) elf_parse_binary: phdr: paddr=0x148b000 memsz=0x14e98 > > (XEN) elf_parse_binary: phdr: paddr=0x14a0000 memsz=0x268000 > > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1708000 > > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff814a0200 > > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 > > (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" > > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > > (XEN) elf_xen_parse_note: LOADER = "generic" > > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > > (XEN) elf_xen_addr_calc_check: addresses: > > (XEN) virt_base = 0xffffffff80000000 > > (XEN) elf_paddr_offset = 0x0 > > (XEN) virt_offset = 0xffffffff80000000 > > (XEN) virt_kstart = 0xffffffff81000000 > > (XEN) virt_kend = 0xffffffff81708000 > > (XEN) virt_entry = 0xffffffff814a0200 > > (XEN) p2m_base = 0xffffffffffffffff > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1708000 > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > (XEN) Dom0 alloc.: 0000000234000000->0000000238000000 (2012036 pages to be allocated) > > (XEN) Init. ramdisk: 000000023ed28000->000000023ffffa00 > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > (XEN) Loaded kernel: ffffffff81000000->ffffffff81708000 > > (XEN) Init. ramdisk: ffffffff81708000->ffffffff829dfa00 > > (XEN) Phys-Mach map: ffffffff829e0000->ffffffff839632e0 > > (XEN) Start info: ffffffff83964000->ffffffff839644b4 > > (XEN) Page tables: ffffffff83965000->ffffffff83986000 > > (XEN) Boot stack: ffffffff83986000->ffffffff83987000 > > (XEN) TOTAL: ffffffff80000000->ffffffff83c00000 > > (XEN) ENTRY ADDRESS: ffffffff814a0200 > > (XEN) Dom0 has maximum 8 VCPUs > > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81404000 > > (XEN) elf_load_binary: phdr 1 at 0xffffffff81404000 -> 0xffffffff814890d0 > > (XEN) elf_load_binary: phdr 2 at 0xffffffff8148a000 -> 0xffffffff8148a888 > > (XEN) elf_load_binary: phdr 3 at 0xffffffff8148b000 -> 0xffffffff8149fe98 > > (XEN) elf_load_binary: phdr 4 at 0xffffffff814a0000 -> 0xffffffff81530000 > > (XEN) Scrubbing Free RAM: .done. > > (XEN) Xen trace buffers: disabled > > (XEN) Std. Loglevel: All > > (XEN) Guest Loglevel: All > > (XEN) Xen is relinquishing VGA console. > > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen) > > (XEN) Freed 228kB init memory. > > mapping kernel into physical memory > > Xen: setup ISA identity maps > > about to get started... > > (XEN) PCI add device 00:00.0 > > (XEN) PCI add device 00:03.0 > > (XEN) PCI add device 00:05.0 > > (XEN) PCI add device 00:08.0 > > (XEN) PCI add device 00:08.1 > > (XEN) PCI add device 00:08.2 > > (XEN) PCI add device 00:08.3 > > (XEN) PCI add device 00:10.0 > > (XEN) PCI add device 00:10.1 > > (XEN) PCI add device 00:1a.0 > > (XEN) PCI add device 00:1c.0 > > (XEN) PCI add device 00:1c.4 > > (XEN) PCI add device 00:1d.0 > > (XEN) PCI add device 00:1e.0 > > (XEN) PCI add device 00:1f.0 > > (XEN) PCI add device 00:1f.2 > > (XEN) PCI add device 00:1f.5 > > (XEN) PCI add device 03:00.0 > > (XEN) PCI add device 02:00.0 > > (XEN) PCI add device 02:00.1 > > (XEN) PCI add device 01:03.0 > > (XEN) *** Serial input -> Xen (type ''CTRL-a'' three times to switch input to DOM0) > > (XEN) ==== PCI devices ===> > (XEN) ff:05.3 - dom 0 - MSIs < > > > (XEN) ff:05.2 - dom 0 - MSIs < > > > (XEN) ff:05.1 - dom 0 - MSIs < > > > (XEN) ff:05.0 - dom 0 - MSIs < > > > (XEN) ff:04.3 - dom 0 - MSIs < > > > (XEN) ff:04.2 - dom 0 - MSIs < > > > (XEN) ff:04.1 - dom 0 - MSIs < > > > (XEN) ff:04.0 - dom 0 - MSIs < > > > (XEN) ff:03.4 - dom 0 - MSIs < > > > (XEN) ff:03.2 - dom 0 - MSIs < > > > (XEN) ff:03.1 - dom 0 - MSIs < > > > (XEN) ff:03.0 - dom 0 - MSIs < > > > (XEN) ff:02.1 - dom 0 - MSIs < > > > (XEN) ff:02.0 - dom 0 - MSIs < > > > (XEN) ff:00.1 - dom 0 - MSIs < > > > (XEN) ff:00.0 - dom 0 - MSIs < > > > (XEN) 03:00.0 - dom 0 - MSIs < > > > (XEN) 02:00.1 - dom 0 - MSIs < > > > (XEN) 02:00.0 - dom 0 - MSIs < > > > (XEN) 01:03.0 - dom 0 - MSIs < > > > (XEN) 00:1f.5 - dom 0 - MSIs < > > > (XEN) 00:1f.2 - dom 0 - MSIs < > > > (XEN) 00:1f.0 - dom 0 - MSIs < > > > (XEN) 00:1e.0 - dom 0 - MSIs < > > > (XEN) 00:1d.0 - dom 0 - MSIs < > > > (XEN) 00:1c.4 - dom 0 - MSIs < 36 > > > (XEN) 00:1c.0 - dom 0 - MSIs < 35 > > > (XEN) 00:1a.0 - dom 0 - MSIs < > > > (XEN) 00:10.1 - dom 0 - MSIs < > > > (XEN) 00:10.0 - dom 0 - MSIs < > > > (XEN) 00:08.3 - dom 0 - MSIs < > > > (XEN) 00:08.2 - dom 0 - MSIs < > > > (XEN) 00:08.1 - dom 0 - MSIs < > > > (XEN) 00:08.0 - dom 0 - MSIs < > > > (XEN) 00:05.0 - dom 0 - MSIs < 34 > > > (XEN) 00:03.0 - dom 0 - MSIs < 33 > > > (XEN) 00:00.0 - dom 0 - MSIs < > > > [disconnect] > > Script done on Thu 24 Mar 2011 16:30:23 GMT > > > # dmidecode 2.9 > > SMBIOS 2.6 present. > > 66 structures occupying 3175 bytes. > > Table at 0xBF79C000. > > > > Handle 0xDA00, DMI type 218, 11 bytes > > OEM-specific Type > > Header and Data: > > DA 0B 00 DA B2 00 17 00 0E 20 00 > > > > Handle 0x0000, DMI type 0, 24 bytes > > BIOS Information > > Vendor: Dell Inc. > > Version: 1.1.5 > > Release Date: 05/24/2010 > > Address: 0xF0000 > > Runtime Size: 64 kB > > ROM Size: 4096 kB > > Characteristics: > > ISA is supported > > PCI is supported > > PNP is supported > > BIOS is upgradeable > > BIOS shadowing is allowed > > Boot from CD is supported > > Selectable boot is supported > > EDD is supported > > Japanese floppy for Toshiba 1.2 MB is supported (int 13h) > > 5.25"/360 KB floppy services are supported (int 13h) > > 5.25"/1.2 MB floppy services are supported (int 13h) > > 3.5"/720 KB floppy services are supported (int 13h) > > 8042 keyboard services are supported (int 9h) > > Serial services are supported (int 14h) > > CGA/mono video services are supported (int 10h) > > ACPI is supported > > USB legacy is supported > > BIOS boot specification is supported > > Function key-initiated network boot is supported > > Targeted content distribution is supported > > BIOS Revision: 1.1 > > > > Handle 0x0100, DMI type 1, 27 bytes > > System Information > > Manufacturer: Dell Inc. > > Product Name: PowerEdge R310 > > Version: Not Specified > > Serial Number: 7V8CW4J > > UUID: 44454C4C-5600-1038-8043-B7C04F57344A > > Wake-up Type: Power Switch > > SKU Number: Not Specified > > Family: Not Specified > > > > Handle 0x0200, DMI type 2, 9 bytes > > Base Board Information > > Manufacturer: Dell Inc. > > Product Name: 05XKKK > > Version: A00 > > Serial Number: ..CN1374008H00Q0. > > > > Handle 0x0300, DMI type 3, 21 bytes > > Chassis Information > > Manufacturer: Dell Inc. > > Type: Rack Mount Chassis > > Lock: Present > > Version: Not Specified > > Serial Number: 7V8CW4J > > Asset Tag: Not Specified > > Boot-up State: Safe > > Power Supply State: Safe > > Thermal State: Safe > > Security Status: Unknown > > OEM Information: 0x00000000 > > Height: 1 U > > Number Of Power Cords: Unspecified > > Contained Elements: 0 > > > > Handle 0x0400, DMI type 4, 40 bytes > > Processor Information > > Socket Designation: CPU1 > > Type: Central Processor > > Family: Xeon > > Manufacturer: Intel > > ID: E5 06 01 00 FF FB EB BF > > Signature: Type 0, Family 6, Model 30, Stepping 5 > > Flags: > > FPU (Floating-point unit on-chip) > > VME (Virtual mode extension) > > DE (Debugging extension) > > PSE (Page size extension) > > TSC (Time stamp counter) > > MSR (Model specific registers) > > PAE (Physical address extension) > > MCE (Machine check exception) > > CX8 (CMPXCHG8 instruction supported) > > APIC (On-chip APIC hardware supported) > > SEP (Fast system call) > > MTRR (Memory type range registers) > > PGE (Page global enable) > > MCA (Machine check architecture) > > CMOV (Conditional move instruction supported) > > PAT (Page attribute table) > > PSE-36 (36-bit page size extension) > > CLFSH (CLFLUSH instruction supported) > > DS (Debug store) > > ACPI (ACPI supported) > > MMX (MMX technology supported) > > FXSR (Fast floating-point save and restore) > > SSE (Streaming SIMD extensions) > > SSE2 (Streaming SIMD extensions 2) > > SS (Self-snoop) > > HTT (Hyper-threading technology) > > TM (Thermal monitor supported) > > PBE (Pending break enabled) > > Version: Intel(R) Xeon(R) CPU X3450 @ 2.67GHz > > Voltage: 1.2 V > > External Clock: 4800 MHz > > Max Speed: 3600 MHz > > Current Speed: 2666 MHz > > Status: Populated, Enabled > > Upgrade: <OUT OF SPEC> > > L1 Cache Handle: 0x0700 > > L2 Cache Handle: 0x0701 > > L3 Cache Handle: 0x0702 > > Serial Number: Not Specified > > Asset Tag: Not Specified > > Part Number: Not Specified > > Core Count: 4 > > Core Enabled: 4 > > Thread Count: 8 > > Characteristics: > > 64-bit capable > > > > Handle 0x0700, DMI type 7, 19 bytes > > Cache Information > > Socket Designation: Not Specified > > Configuration: Enabled, Not Socketed, Level 1 > > Operational Mode: Write Back > > Location: Internal > > Installed Size: 128 KB > > Maximum Size: 128 KB > > Supported SRAM Types: > > Unknown > > Installed SRAM Type: Unknown > > Speed: Unknown > > Error Correction Type: Single-bit ECC > > System Type: Data > > Associativity: 8-way Set-associative > > > > Handle 0x0701, DMI type 7, 19 bytes > > Cache Information > > Socket Designation: Not Specified > > Configuration: Enabled, Not Socketed, Level 2 > > Operational Mode: Write Back > > Location: Internal > > Installed Size: 1024 KB > > Maximum Size: 2048 KB > > Supported SRAM Types: > > Unknown > > Installed SRAM Type: Unknown > > Speed: Unknown > > Error Correction Type: Single-bit ECC > > System Type: Unified > > Associativity: 8-way Set-associative > > > > Handle 0x0702, DMI type 7, 19 bytes > > Cache Information > > Socket Designation: Not Specified > > Configuration: Enabled, Not Socketed, Level 3 > > Operational Mode: Write Back > > Location: Internal > > Installed Size: 8192 KB > > Maximum Size: 8192 KB > > Supported SRAM Types: > > Unknown > > Installed SRAM Type: Unknown > > Speed: Unknown > > Error Correction Type: Single-bit ECC > > System Type: Unified > > Associativity: 16-way Set-associative > > > > Handle 0x0800, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: Not Specified > > Internal Connector Type: None > > External Reference Designator: Not Specified > > External Connector Type: DB-15 female > > Port Type: Video Port > > > > Handle 0x0801, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: Not Specified > > Internal Connector Type: None > > External Reference Designator: Not Specified > > External Connector Type: DB-15 female > > Port Type: Video Port > > > > Handle 0x0802, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: Not Specified > > Internal Connector Type: None > > External Reference Designator: Not Specified > > External Connector Type: Access Bus (USB) > > Port Type: USB > > > > Handle 0x0803, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: Not Specified > > Internal Connector Type: None > > External Reference Designator: Not Specified > > External Connector Type: Access Bus (USB) > > Port Type: USB > > > > Handle 0x0804, DMI type 126, 9 bytes > > Inactive > > > > Handle 0x0805, DMI type 126, 9 bytes > > Inactive > > > > Handle 0x0806, DMI type 126, 9 bytes > > Inactive > > > > Handle 0x0807, DMI type 126, 9 bytes > > Inactive > > > > Handle 0x0808, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: Not Specified > > Internal Connector Type: None > > External Reference Designator: Not Specified > > External Connector Type: Access Bus (USB) > > Port Type: USB > > > > Handle 0x0809, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: Not Specified > > Internal Connector Type: None > > External Reference Designator: Not Specified > > External Connector Type: Access Bus (USB) > > Port Type: USB > > > > Handle 0x080A, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: INT_USB1 > > Internal Connector Type: Access Bus (USB) > > External Reference Designator: Not Specified > > External Connector Type: None > > Port Type: USB > > > > Handle 0x080B, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: INT_USB2 > > Internal Connector Type: Access Bus (USB) > > External Reference Designator: Not Specified > > External Connector Type: None > > Port Type: USB > > > > Handle 0x080C, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: INT_SATA1 > > Internal Connector Type: SAS/SATA Plug Receptacle > > External Reference Designator: Not Specified > > External Connector Type: None > > Port Type: SATA > > > > Handle 0x080D, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: INT_SATA2 > > Internal Connector Type: SAS/SATA Plug Receptacle > > External Reference Designator: Not Specified > > External Connector Type: None > > Port Type: SATA > > > > Handle 0x080E, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: INT_SATA3 > > Internal Connector Type: SAS/SATA Plug Receptacle > > External Reference Designator: Not Specified > > External Connector Type: None > > Port Type: SATA > > > > Handle 0x080F, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: INT_SATA4 > > Internal Connector Type: SAS/SATA Plug Receptacle > > External Reference Designator: Not Specified > > External Connector Type: None > > Port Type: SATA > > > > Handle 0x0810, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: INT_SATA5 > > Internal Connector Type: SAS/SATA Plug Receptacle > > External Reference Designator: Not Specified > > External Connector Type: None > > Port Type: SATA > > > > Handle 0x0811, DMI type 126, 9 bytes > > Inactive > > > > Handle 0x0812, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: Not Specified > > Internal Connector Type: None > > External Reference Designator: Not Specified > > External Connector Type: RJ-45 > > Port Type: Network Port > > > > Handle 0x0813, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: Not Specified > > Internal Connector Type: None > > External Reference Designator: Not Specified > > External Connector Type: RJ-45 > > Port Type: Network Port > > > > Handle 0x0814, DMI type 8, 9 bytes > > Port Connector Information > > Internal Reference Designator: Not Specified > > Internal Connector Type: None > > External Reference Designator: Not Specified > > External Connector Type: DB-9 male > > Port Type: Serial Port 16550A Compatible > > > > Handle 0x0900, DMI type 9, 17 bytes > > System Slot Information > > Designation: PCIE1 > > Type: x8 <OUT OF SPEC> > > Current Usage: Available > > Length: Long > > Characteristics: > > 3.3 V is provided > > PME signal is supported > > > > Handle 0x0901, DMI type 9, 17 bytes > > System Slot Information > > Designation: PCIE2 > > Type: x8 <OUT OF SPEC> > > Current Usage: Available > > Length: Long > > Characteristics: > > 3.3 V is provided > > PME signal is supported > > > > Handle 0x0902, DMI type 126, 17 bytes > > Inactive > > > > Handle 0x0903, DMI type 126, 17 bytes > > Inactive > > > > Handle 0x0904, DMI type 126, 17 bytes > > Inactive > > > > Handle 0x0A00, DMI type 10, 12 bytes > > On Board Device 1 Information > > Type: Video > > Status: Enabled > > Description: Embedded Matrox G200 Video > > On Board Device 2 Information > > Type: Ethernet > > Status: Enabled > > Description: Embedded Broadcom 5716 NIC 1 > > On Board Device 3 Information > > Type: Ethernet > > Status: Enabled > > Description: Embedded Broadcom 5716 NIC 2 > > On Board Device 4 Information > > Type: SAS Controller > > Status: Enabled > > Description: Integrated SAS Controller > > > > Handle 0x0B00, DMI type 11, 5 bytes > > OEM Strings > > String 1: Dell System > > String 2: 5[0000] > > > > Handle 0x7E00, DMI type 126, 170 bytes > > Inactive > > > > Handle 0x0C00, DMI type 12, 5 bytes > > System Configuration Options > > Option 1: NVRAM_CLR: Clear user settable NVRAM areas and set defaults > > Option 2: PWRD_EN: Close to enable password > > > > Handle 0x0D00, DMI type 13, 22 bytes > > BIOS Language Information > > Installable Languages: 1 > > en|US|iso8859-1 > > Currently Installed Language: en|US|iso8859-1 > > > > Handle 0x1000, DMI type 16, 15 bytes > > Physical Memory Array > > Location: System Board Or Motherboard > > Use: System Memory > > Error Correction Type: Multi-bit ECC > > Maximum Capacity: 32 GB > > Error Information Handle: Not Provided > > Number Of Devices: 6 > > > > Handle 0x1100, DMI type 17, 28 bytes > > Memory Device > > Array Handle: 0x1000 > > Error Information Handle: Not Provided > > Total Width: 72 bits > > Data Width: 64 bits > > Size: 2048 MB > > Form Factor: DIMM > > Set: 1 > > Locator: DIMM_A1 > > Bank Locator: Not Specified > > Type: <OUT OF SPEC> > > Type Detail: Synchronous > > Speed: 1333 MHz (0.8 ns) > > Manufacturer: 00AD000080AD > > Serial Number: 0FA35777 > > Asset Tag: 01103000 > > Part Number: HMT125U7TFR8C-H9 > > > > Handle 0x1101, DMI type 17, 28 bytes > > Memory Device > > Array Handle: 0x1000 > > Error Information Handle: Not Provided > > Total Width: 72 bits > > Data Width: 64 bits > > Size: 2048 MB > > Form Factor: DIMM > > Set: 1 > > Locator: DIMM_A2 > > Bank Locator: Not Specified > > Type: <OUT OF SPEC> > > Type Detail: Synchronous > > Speed: 1333 MHz (0.8 ns) > > Manufacturer: 00AD000080AD > > Serial Number: 0F635782 > > Asset Tag: 01103000 > > Part Number: HMT125U7TFR8C-H9 > > > > Handle 0x1102, DMI type 17, 28 bytes > > Memory Device > > Array Handle: 0x1000 > > Error Information Handle: Not Provided > > Total Width: 72 bits > > Data Width: 64 bits > > Size: 2048 MB > > Form Factor: DIMM > > Set: 2 > > Locator: DIMM_A3 > > Bank Locator: Not Specified > > Type: <OUT OF SPEC> > > Type Detail: Synchronous > > Speed: 1333 MHz (0.8 ns) > > Manufacturer: 00AD000080AD > > Serial Number: 0F23577E > > Asset Tag: 01103000 > > Part Number: HMT125U7TFR8C-H9 > > > > Handle 0x1103, DMI type 17, 28 bytes > > Memory Device > > Array Handle: 0x1000 > > Error Information Handle: Not Provided > > Total Width: 72 bits > > Data Width: 64 bits > > Size: 2048 MB > > Form Factor: DIMM > > Set: 2 > > Locator: DIMM_A4 > > Bank Locator: Not Specified > > Type: <OUT OF SPEC> > > Type Detail: Synchronous > > Speed: 1333 MHz (0.8 ns) > > Manufacturer: 00AD000080AD > > Serial Number: 0F535115 > > Asset Tag: 01103000 > > Part Number: HMT125U7TFR8C-H9 > > > > Handle 0x1104, DMI type 17, 28 bytes > > Memory Device > > Array Handle: 0x1000 > > Error Information Handle: Not Provided > > Total Width: 72 bits > > Data Width: 64 bits > > Size: No Module Installed > > Form Factor: DIMM > > Set: 3 > > Locator: DIMM_A5 > > Bank Locator: Not Specified > > Type: <OUT OF SPEC> > > Type Detail: Synchronous > > Speed: Unknown > > Manufacturer: > > Serial Number: > > Asset Tag: > > Part Number: > > > > Handle 0x1105, DMI type 17, 28 bytes > > Memory Device > > Array Handle: 0x1000 > > Error Information Handle: Not Provided > > Total Width: 72 bits > > Data Width: 64 bits > > Size: No Module Installed > > Form Factor: DIMM > > Set: 3 > > Locator: DIMM_A6 > > Bank Locator: Not Specified > > Type: <OUT OF SPEC> > > Type Detail: Synchronous > > Speed: Unknown > > Manufacturer: > > Serial Number: > > Asset Tag: > > Part Number: > > > > Handle 0x1300, DMI type 19, 15 bytes > > Memory Array Mapped Address > > Starting Address: 0x00000000000 > > Ending Address: 0x000BFFFFFFF > > Range Size: 3 GB > > Physical Array Handle: 0x1000 > > Partition Width: 0 > > > > Handle 0x1301, DMI type 19, 15 bytes > > Memory Array Mapped Address > > Starting Address: 0x00100000000 > > Ending Address: 0x0023FFFFFFF > > Range Size: 5 GB > > Physical Array Handle: 0x1000 > > Partition Width: 0 > > > > Handle 0x2000, DMI type 32, 11 bytes > > System Boot Information > > Status: No errors detected > > > > Handle 0x2600, DMI type 38, 18 bytes > > IPMI Device Information > > Interface Type: KCS (Keyboard Control Style) > > Specification Version: 2.0 > > I2C Slave Address: 0x10 > > NV Storage Device: Not Present > > Base Address: 0x0000000000000CA8 (I/O) > > Register Spacing: 32-bit Boundaries > > > > Handle 0x2900, DMI type 41, 11 bytes > > Unknown Type > > Header and Data: > > 29 0B 00 29 01 85 01 00 00 02 00 > > Strings: > > Embedded NIC 1 > > > > Handle 0x2901, DMI type 41, 11 bytes > > Unknown Type > > Header and Data: > > 29 0B 01 29 01 85 02 00 00 02 01 > > Strings: > > Embedded NIC 2 > > > > Handle 0x2902, DMI type 41, 11 bytes > > Unknown Type > > Header and Data: > > 29 0B 02 29 01 8A 04 00 00 03 00 > > Strings: > > Integrated SAS > > > > Handle 0x2903, DMI type 126, 11 bytes > > Inactive > > > > Handle 0x2904, DMI type 41, 11 bytes > > Unknown Type > > Header and Data: > > 29 0B 04 29 01 83 04 00 00 01 18 > > Strings: > > Embedded Video > > > > Handle 0xD000, DMI type 208, 16 bytes > > OEM-specific Type > > Header and Data: > > D0 10 00 D0 02 00 FE 00 A3 02 00 00 00 01 00 00 > > > > Handle 0xD200, DMI type 210, 12 bytes > > OEM-specific Type > > Header and Data: > > D2 0C 00 D2 F8 03 04 03 06 80 04 05 > > > > Handle 0xD400, DMI type 212, 87 bytes > > OEM-specific Type > > Header and Data: > > D4 57 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE > > 01 43 00 11 FE 00 70 01 11 9F 20 6F 01 11 9F 00 > > 00 00 11 9F 20 00 00 11 9F 00 31 40 11 FB 00 32 > > 40 11 FB 04 9D 00 11 FD 02 9E 00 11 FD 00 9F 00 > > 26 FE 01 A0 00 26 FE 00 28 40 26 DF 20 29 40 26 > > DF 00 FF FF 00 00 00 > > > > Handle 0xD401, DMI type 212, 242 bytes > > OEM-specific Type > > Header and Data: > > D4 F2 01 D4 70 00 71 00 03 40 5A 6D 5C 00 78 BF > > 40 5D 00 78 BF 00 6C 01 57 FC 00 6B 01 57 FC 01 > > 6A 01 57 FC 02 12 02 57 EF 00 11 02 57 EF 10 77 > > 01 54 FC 00 78 01 54 FC 01 79 01 54 FC 02 7A 01 > > 54 FC 03 33 40 54 CF 00 34 40 54 CF 10 35 40 54 > > CF 20 36 40 54 CF 30 1A 40 54 FB 04 1B 40 54 FB > > 00 1C 40 54 F7 08 1D 40 54 F7 00 43 40 58 DF 20 > > 42 40 58 DF 00 24 40 58 BF 40 25 40 58 BF 00 6E > > 00 58 FC 01 2D 00 58 FC 02 DA 01 58 FC 03 22 40 > > 58 EF 10 23 40 58 EF 00 BB 00 58 F3 04 BC 00 58 > > F3 08 DB 01 58 F3 0C 2D 02 55 FE 01 2E 02 55 FE > > 00 D8 00 55 7F 80 D9 00 55 7F 00 54 02 56 DF 00 > > 57 02 56 DF 20 4D 02 56 BF 00 4E 02 56 BF 40 2D > > 01 56 7F 80 2E 01 56 7F 00 00 C0 5C 00 0A 03 C0 > > 67 00 05 83 00 76 00 00 84 00 77 00 00 FF FF 00 > > 00 00 > > > > Handle 0xD402, DMI type 212, 172 bytes > > OEM-specific Type > > Header and Data: > > D4 AC 02 D4 72 00 73 00 00 40 5D 5E D3 00 00 00 > > 02 D4 00 02 00 02 4A 01 46 BF 40 4B 01 46 BF 00 > > 00 90 2C 00 00 01 90 2D 00 00 DE 00 63 FE 01 26 > > 40 42 FE 01 27 40 42 FE 00 17 01 4A FE 00 18 01 > > 4A FE 01 19 01 4A FD 00 1A 01 4A FD 02 1B 01 4A > > FB 00 1C 01 4A FB 04 1D 01 4A F7 00 1E 01 4A F7 > > 08 1F 01 44 FE 00 20 01 44 FE 01 00 00 44 FD 00 > > 00 00 44 FD 02 35 01 4B FC 00 37 01 4B FC 01 39 > > 01 4B FC 02 3B 01 4B F3 04 02 40 46 DF 00 01 40 > > 46 DF 20 FC 01 45 BF 00 FD 01 45 BF 40 00 00 45 > > 7F 80 00 00 45 7F 00 FF FF 00 00 00 > > > > Handle 0xD403, DMI type 212, 97 bytes > > OEM-specific Type > > Header and Data: > > D4 61 03 D4 72 00 73 00 00 40 5D 5E D1 00 46 FE > > 00 D2 00 46 FE 01 40 01 47 EF 10 41 01 47 EF 00 > > EB 01 47 FD 00 EA 01 47 FD 02 33 02 47 F3 04 32 > > 02 47 F3 08 31 02 47 F3 00 6E 02 47 F3 00 4B 02 > > 47 DF 00 4C 02 47 DF 20 44 01 4E CF 00 45 01 4E > > CF 10 4A 02 4E F3 04 0C 80 4E F3 08 FF FF 00 00 > > 00 > > > > Handle 0xD800, DMI type 216, 9 bytes > > OEM-specific Type > > Header and Data: > > D8 09 00 D8 01 02 01 00 00 > > Strings: > > MATROX > > VGA/VBE BIOS, Version V3.8WO > > > > Handle 0xDE00, DMI type 222, 16 bytes > > OEM-specific Type > > Header and Data: > > DE 10 00 DE 01 08 FF FF 00 00 00 00 00 00 00 01 > > > > Handle 0xE100, DMI type 225, 33 bytes > > OEM-specific Type > > Header and Data: > > E1 21 00 E1 01 01 00 04 00 02 00 11 00 03 01 11 > > 00 04 02 11 00 05 03 11 00 06 04 11 00 07 05 11 > > 00 > > Strings: > > CPU.Socket.1 > > DIMM.Socket.A1 > > DIMM.Socket.A2 > > DIMM.Socket.A3 > > DIMM.Socket.A4 > > DIMM.Socket.A5 > > DIMM.Socket.A6 > > > > Handle 0x7F00, DMI type 127, 4 bytes > > End Of Table > > > > > 00:00.0 Host bridge: Intel Corporation Clarksfield/Lynnfield DMI (rev 11) > > Subsystem: Dell Device 02a3 > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable- > > Address: 00000000 Data: 0000 > > Masking: 00000000 Pending: 00000000 > > Capabilities: [90] Express (v1) Root Port (Slot-), MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag+ RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us > > ClockPM- Suprise+ LLActRep+ BwNot+ > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- > > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > Capabilities: [e0] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [100] Advanced Error Reporting <?> > > Capabilities: [150] Access Controls <?> > > Capabilities: [160] Vendor Specific Information <?> > > > > 00:03.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 1 (rev 11) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Subsystem: Dell Device 02a3 > > Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+ > > Address: feeff00c Data: 4151 > > Masking: 00000002 Pending: 00000000 > > Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 > > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag+ RBE+ FLReset- > > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > > LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us > > ClockPM- Suprise+ LLActRep+ BwNot+ > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > > Slot # 1, PowerLimit 25.000000; Interlock- NoCompl- > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > > Control: AttnInd Off, PwrInd Off, Power+ Interlock- > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > > Changed: MRL- PresDet- LinkState- > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- > > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > Capabilities: [e0] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [100] Advanced Error Reporting <?> > > Capabilities: [150] Access Controls <?> > > Capabilities: [160] Vendor Specific Information <?> > > Kernel driver in use: pcieport-driver > > Kernel modules: shpchp > > > > 00:05.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 3 (rev 11) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Subsystem: Dell Device 02a3 > > Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+ > > Address: feeff00c Data: 4159 > > Masking: 00000002 Pending: 00000000 > > Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 > > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag+ RBE+ FLReset- > > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > > LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us > > ClockPM- Suprise+ LLActRep+ BwNot+ > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > > Slot # 2, PowerLimit 25.000000; Interlock- NoCompl- > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > > Control: AttnInd Off, PwrInd Off, Power+ Interlock- > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > > Changed: MRL- PresDet- LinkState- > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- > > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > Capabilities: [e0] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [100] Advanced Error Reporting <?> > > Capabilities: [150] Access Controls <?> > > Kernel driver in use: pcieport-driver > > Kernel modules: shpchp > > > > 00:08.0 System peripheral: Intel Corporation Clarksfield/Lynnfield System Management Registers (rev 11) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > > LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited > > ClockPM- Suprise+ LLActRep+ BwNot+ > > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > Capabilities: [100] Vendor Specific Information <?> > > > > 00:08.1 System peripheral: Intel Corporation Clarksfield/Lynnfield Semaphore and Scratchpad Registers (rev 11) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > > LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited > > ClockPM- Suprise+ LLActRep+ BwNot+ > > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > Capabilities: [100] Vendor Specific Information <?> > > > > 00:08.2 System peripheral: Intel Corporation Clarksfield/Lynnfield System Control and Status Registers (rev 11) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > > LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited > > ClockPM- Suprise+ LLActRep+ BwNot+ > > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > Capabilities: [100] Vendor Specific Information <?> > > > > 00:08.3 System peripheral: Intel Corporation Clarksfield/Lynnfield Miscellaneous Registers (rev 11) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > 00:10.0 System peripheral: Intel Corporation Device d150 (rev 11) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > 00:10.1 System peripheral: Intel Corporation Device d151 (rev 11) > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI]) > > Subsystem: Dell Device 02a3 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Interrupt: pin A routed to IRQ 22 > > Region 0: Memory at df0fc000 (32-bit, non-prefetchable) [size=1K] > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [58] Debug port: BAR=1 offset=00a0 > > Capabilities: [98] PCIe advanced features <?> > > Kernel driver in use: ehci_hcd > > Kernel modules: ehci-hcd > > > > 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > > I/O behind bridge: 0000f000-0000ffff > > Memory behind bridge: df100000-df2fffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE+ FLReset- > > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > > LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us > > ClockPM- Suprise- LLActRep+ BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- > > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > > Address: feeff00c Data: 4161 > > Capabilities: [90] Subsystem: Dell Device 02a3 > > Capabilities: [a0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Kernel driver in use: pcieport-driver > > Kernel modules: shpchp > > > > 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > > Memory behind bridge: da000000-ddffffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE+ FLReset- > > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > > LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us > > ClockPM- Suprise- LLActRep+ BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > > RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- > > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > > Address: feeff00c Data: 4169 > > Capabilities: [90] Subsystem: Dell Device 02a3 > > Capabilities: [a0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Kernel driver in use: pcieport-driver > > Kernel modules: shpchp > > > > 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI]) > > Subsystem: Dell Device 02a3 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Interrupt: pin A routed to IRQ 22 > > Region 0: Memory at df0fe000 (32-bit, non-prefetchable) [size=1K] > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [58] Debug port: BAR=1 offset=00a0 > > Capabilities: [98] PCIe advanced features <?> > > Kernel driver in use: ehci_hcd > > Kernel modules: ehci-hcd > > > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01 [Subtractive decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > > Memory behind bridge: de000000-deffffff > > Prefetchable memory behind bridge: 00000000d9800000-00000000d9ffffff > > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [50] Subsystem: Dell Device 02a3 > > > > 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) > > Subsystem: Dell Device 02a3 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Capabilities: [e0] Vendor Specific Information <?> > > > > 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) > > Subsystem: Dell Device 02a3 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Interrupt: pin A routed to IRQ 20 > > Region 0: I/O ports at eca0 [size=8] > > Region 1: I/O ports at ec90 [size=4] > > Region 2: I/O ports at eca8 [size=8] > > Region 3: I/O ports at ec94 [size=4] > > Region 4: I/O ports at ecc0 [size=16] > > Region 5: I/O ports at ecd0 [size=16] > > Capabilities: [70] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [b0] PCIe advanced features <?> > > Kernel driver in use: ata_piix > > Kernel modules: ata_generic, ata_piix, ide-pci-generic > > > > 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO]) > > Subsystem: Dell Device 02a3 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0 > > Interrupt: pin B routed to IRQ 21 > > Region 0: I/O ports at ecb0 [size=8] > > Region 1: I/O ports at ec98 [size=4] > > Region 2: I/O ports at ecb8 [size=8] > > Region 3: I/O ports at ec9c [size=4] > > Region 4: I/O ports at ece0 [size=16] > > Region 5: I/O ports at ecf0 [size=16] > > Capabilities: [70] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [b0] PCIe advanced features <?> > > Kernel driver in use: ata_piix > > Kernel modules: ata_generic, ata_piix, ide-pci-generic > > > > 01:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 [Hermon] - Winbond/Nuvoton (rev 0a) (prog-if 00 [VGA controller]) > > Subsystem: Dell Device 02a3 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 6 > > Region 0: Memory at d9800000 (32-bit, prefetchable) [size=8M] > > Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K] > > Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M] > > [virtual] Expansion ROM at de000000 [disabled] [size=64K] > > Capabilities: [dc] Power Management version 1 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20) > > Subsystem: Dell Device 02a3 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 16 > > Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M] > > Capabilities: [48] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > > Capabilities: [50] Vital Product Data <?> > > Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable- > > Address: 0000000000000000 Data: 0000 > > Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=9 > > Vector table: BAR=0 offset=0000c000 > > PBA: BAR=0 offset=0000e000 > > Capabilities: [ac] Express (v2) Endpoint, MSI 00 > > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us > > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ > > MaxPayload 128 bytes, MaxReadReq 512 bytes > > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us > > ClockPM- Suprise- LLActRep- BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > Capabilities: [100] Device Serial Number 2a-88-52-fe-ff-2b-2b-84 > > Capabilities: [110] Advanced Error Reporting <?> > > Capabilities: [150] Power Budgeting <?> > > Capabilities: [160] Virtual Channel <?> > > Kernel driver in use: bnx2 > > Kernel modules: bnx2 > > > > 02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20) > > Subsystem: Dell Device 02a3 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin B routed to IRQ 17 > > Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M] > > Capabilities: [48] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > > Capabilities: [50] Vital Product Data <?> > > Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable- > > Address: 0000000000000000 Data: 0000 > > Capabilities: [a0] MSI-X: Enable- Mask- TabSize=9 > > Vector table: BAR=0 offset=0000c000 > > PBA: BAR=0 offset=0000e000 > > Capabilities: [ac] Express (v2) Endpoint, MSI 00 > > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us > > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ > > MaxPayload 128 bytes, MaxReadReq 512 bytes > > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > > LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us > > ClockPM- Suprise- LLActRep- BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > Capabilities: [100] Device Serial Number 2b-88-52-fe-ff-2b-2b-84 > > Capabilities: [110] Advanced Error Reporting <?> > > Capabilities: [150] Power Budgeting <?> > > Capabilities: [160] Virtual Channel <?> > > Kernel driver in use: bnx2 > > Kernel modules: bnx2 > > > > 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) > > Subsystem: Dell SAS 6/iR Integrated Blades RAID Controller > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 1275 > > Region 0: I/O ports at fc00 [size=256] > > Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K] > > Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K] > > Expansion ROM at df100000 [disabled] [size=1M] > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [68] Express (v1) Endpoint, MSI 00 > > DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported- > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > MaxPayload 128 bytes, MaxReadReq 512 bytes > > DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- > > LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us > > ClockPM- Suprise- LLActRep- BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- > > Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ > > Address: 00000000feeff00c Data: 4181 > > Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1 > > Vector table: BAR=1 offset=00002000 > > PBA: BAR=1 offset=00003000 > > Capabilities: [100] Advanced Error Reporting <?> > > Kernel driver in use: mptsas > > Kernel modules: mptsas > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Konrad Rzeszutek Wilk
2011-Mar-25 16:42 UTC
Re: [Xen-devel] Xen 4.2 unstable + Jeremy''s stable/2.6.32.x
On Fri, Mar 25, 2011 at 03:34:36PM +0000, Goncalo Gomes wrote:> On Fri, 2011-03-25 at 14:49 +0000, Konrad Rzeszutek Wilk wrote: > > > Any alternate hints and/or suggestions would be fairly welcome. I''m > > > attaching some relevant information about the HW in question. > > > > Try adding ''debug loglevel=10 earlyprintk=xenboot'' on the Linux command line. > > Thanks for the suggestions, but with these changes nothing substantially > different comes up on the serial. It stops just after adding PCI 01:03.0 > as before. Starting to suspect CONFIG_XEN_DOM0_PCI, as I''ve neverYeah, that is quite important. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Goncalo Gomes
2011-Mar-27 01:57 UTC
Re: [Xen-devel] Xen 4.2 unstable + Jeremy''s stable/2.6.32.x
On Fri, 2011-03-25 at 16:42 +0000, Konrad Rzeszutek Wilk wrote:> On Fri, Mar 25, 2011 at 03:34:36PM +0000, Goncalo Gomes wrote: > > On Fri, 2011-03-25 at 14:49 +0000, Konrad Rzeszutek Wilk wrote: > > > > Any alternate hints and/or suggestions would be fairly welcome. I''m > > > > attaching some relevant information about the HW in question. > > > > > > Try adding ''debug loglevel=10 earlyprintk=xenboot'' on the Linux command line. > > > > Thanks for the suggestions, but with these changes nothing substantially > > different comes up on the serial. It stops just after adding PCI 01:03.0 > > as before. Starting to suspect CONFIG_XEN_DOM0_PCI, as I''ve never > > Yeah, that is quite important.That didn''t help still. I ended up solving my problem using a hackedup version of Gianni''s config file. Thanks though! Goncalo _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel