[PATCH 22/22] docs: fix broken documentation links

Bhupesh Sharma
Tue, 04 Jun 2019 06:13:07 -0000

On 05/30/2019 04:53 AM, Mauro Carvalho Chehab wrote:
> Mostly due to x86 and acpi conversion, several documentation
> links are still pointing to the old file. Fix them.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung at kernel.org>
> ---
>   Documentation/acpi/dsd/leds.txt                  |  2 +-
>   Documentation/admin-guide/kernel-parameters.rst  |  6 +++---
>   Documentation/admin-guide/kernel-parameters.txt  | 16 ++++++++--------
>   Documentation/admin-guide/ras.rst                |  2 +-
>   .../devicetree/bindings/net/fsl-enetc.txt        |  7 +++----
>   .../bindings/pci/amlogic,meson-pcie.txt          |  2 +-
>   .../bindings/regulator/qcom,rpmh-regulator.txt   |  2 +-
>   Documentation/devicetree/booting-without-of.txt  |  2 +-
>   Documentation/driver-api/gpio/board.rst          |  2 +-
>   Documentation/driver-api/gpio/consumer.rst       |  2 +-
>   .../firmware-guide/acpi/enumeration.rst          |  2 +-
>   .../firmware-guide/acpi/method-tracing.rst       |  2 +-
>   Documentation/i2c/instantiating-devices          |  2 +-
>   Documentation/sysctl/kernel.txt                  |  4 ++--
>   .../translations/it_IT/process/howto.rst         |  2 +-
>   .../it_IT/process/stable-kernel-rules.rst        |  4 ++--
>   .../translations/zh_CN/process/4.Coding.rst      |  2 +-
>   Documentation/x86/x86_64/5level-paging.rst       |  2 +-
>   Documentation/x86/x86_64/boot-options.rst        |  4 ++--
>   .../x86/x86_64/fake-numa-for-cpusets.rst         |  2 +-
>   MAINTAINERS                                      |  6 +++---
>   arch/arm/Kconfig                                 |  2 +-
>   arch/arm64/kernel/kexec_image.c                  |  2 +-
>   arch/powerpc/Kconfig                             |  2 +-
>   arch/x86/Kconfig                                 | 16 ++++++++--------
>   arch/x86/Kconfig.debug                           |  2 +-
>   arch/x86/boot/header.S                           |  2 +-
>   arch/x86/entry/entry_64.S                        |  2 +-
>   arch/x86/include/asm/bootparam_utils.h           |  2 +-
>   arch/x86/include/asm/page_64_types.h             |  2 +-
>   arch/x86/include/asm/pgtable_64_types.h          |  2 +-
>   arch/x86/kernel/cpu/microcode/amd.c              |  2 +-
>   arch/x86/kernel/kexec-bzimage64.c                |  2 +-
>   arch/x86/kernel/pci-dma.c                        |  2 +-
>   arch/x86/mm/tlb.c                                |  2 +-
>   arch/x86/platform/pvh/enlighten.c                |  2 +-
>   drivers/acpi/Kconfig                             | 10 +++++-----
>   drivers/net/ethernet/faraday/ftgmac100.c         |  2 +-
>   .../fieldbus/Documentation/fieldbus_dev.txt      |  4 ++--
>   drivers/vhost/vhost.c                            |  2 +-
>   include/acpi/acpi_drivers.h                      |  2 +-
>   include/linux/fs_context.h                       |  2 +-
>   include/linux/lsm_hooks.h                        |  2 +-
>   mm/Kconfig                                       |  2 +-
>   security/Kconfig                                 |  2 +-
>   tools/include/linux/err.h                        |  2 +-
>   tools/objtool/Documentation/stack-validation.txt |  4 ++--
>   tools/testing/selftests/x86/protection_keys.c    |  2 +-
>   48 files changed, 77 insertions(+), 78 deletions(-)
>
> diff --git a/Documentation/acpi/dsd/leds.txt
b/Documentation/acpi/dsd/leds.txt
> index 81a63af42ed2..cc58b1a574c5 100644
> --- a/Documentation/acpi/dsd/leds.txt
> +++ b/Documentation/acpi/dsd/leds.txt
> @@ -96,4 +96,4 @@ where
>
<URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>,
>       referenced 2019-02-21.
>
> -[7] Documentation/acpi/dsd/data-node-reference.txt
> +[7] Documentation/firmware-guide/acpi/dsd/data-node-references.rst
> diff --git a/Documentation/admin-guide/kernel-parameters.rst
b/Documentation/admin-guide/kernel-parameters.rst
> index 0124980dca2d..8d3273e32eb1 100644
> --- a/Documentation/admin-guide/kernel-parameters.rst
> +++ b/Documentation/admin-guide/kernel-parameters.rst
> @@ -167,7 +167,7 @@ parameter is applicable::
>       X86-32  X86-32, aka i386 architecture is enabled.
>       X86-64  X86-64 architecture is enabled.
>                       More X86-64 boot options can be found in
> -                     Documentation/x86/x86_64/boot-options.txt .
> +                     Documentation/x86/x86_64/boot-options.rst.
>       X86     Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
>       X86_UV  SGI UV support is enabled.
>       XEN     Xen support is enabled
> @@ -181,10 +181,10 @@ In addition, the following text indicates that the
option::
>   Parameters denoted with BOOT are actually interpreted by the boot
>   loader, and have no meaning to the kernel directly.
>   Do not modify the syntax of boot loader parameters without extreme
> -need or coordination with <Documentation/x86/boot.txt>.
> +need or coordination with <Documentation/x86/boot.rst>.
>
>   There are also arch-specific kernel-parameters not documented here.
> -See for example <Documentation/x86/x86_64/boot-options.txt>.
> +See for example <Documentation/x86/x86_64/boot-options.rst>.
>
>   Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
>   a trailing = on the name of any parameter states that that parameter will
> diff --git a/Documentation/admin-guide/kernel-parameters.txt
b/Documentation/admin-guide/kernel-parameters.txt
> index 138f6664b2e2..4a02d1346635 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -53,7 +53,7 @@
>                       ACPI_DEBUG_PRINT statements, e.g.,
>                           ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
>                       The debug_level mask defaults to "info".
See
> -                     Documentation/acpi/debug.txt for more information
about
> +                     Documentation/firmware-guide/acpi/debug.rst for more
information about
>                       debug layers and levels.
>
>                       Enable processor driver info messages:
> @@ -963,7 +963,7 @@
>                       for details.
>
>       nompx           [X86] Disables Intel Memory Protection Extensions.
> -                     See Documentation/x86/intel_mpx.txt for more
> +                     See Documentation/x86/intel_mpx.rst for more
>                       information about the feature.
>
>       nopku           [X86] Disable Memory Protection Keys CPU feature
found
> @@ -1189,7 +1189,7 @@
>                       that is to be dynamically loaded by Linux. If there
are
>                       multiple variables with the same name but with
different
>                       vendor GUIDs, all of them will be loaded. See
> -                     Documentation/acpi/ssdt-overlays.txt for details.
> +                     Documentation/admin-guide/acpi/ssdt-overlays.rst for
details.
>
>
>       eisa_irq_edge=  [PARISC,HW]
> @@ -2383,7 +2383,7 @@
>
>       mce             [X86-32] Machine Check Exception
>
> -     mce=option      [X86-64] See
Documentation/x86/x86_64/boot-options.txt
> +     mce=option      [X86-64] See
Documentation/x86/x86_64/boot-options.rst
>
>       md=             [HW] RAID subsystems devices and level
>                       See Documentation/admin-guide/md.rst.
> @@ -2439,7 +2439,7 @@
>                       set according to the
>                       CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel config
>                       option.
> -                     See Documentation/memory-hotplug.txt.
> +                     See Documentation/admin-guide/mm/memory-hotplug.rst.
>
>       memmap=exactmap [KNL,X86] Enable setting of an exact
>                       E820 memory map, as specified by the user.
> @@ -2528,7 +2528,7 @@
>                       mem_encrypt=on:         Activate SME
>                       mem_encrypt=off:        Do not activate SME
>
> -                     Refer to Documentation/x86/amd-memory-encryption.txt
> +                     Refer to
Documentation/virtual/kvm/amd-memory-encryption.rst
>                       for details on when memory encryption can be
activated.
>
>       mem_sleep_default=      [SUSPEND] Default system suspend mode:
> @@ -3528,7 +3528,7 @@
>                       See Documentation/blockdev/paride.txt.
>
>       pirq=           [SMP,APIC] Manual mp-table setup
> -                     See Documentation/x86/i386/IO-APIC.txt.
> +                     See Documentation/x86/i386/IO-APIC.rst.
>
>       plip=           [PPT,NET] Parallel port network link
>                       Format: { parport<nr> | timid | 0 }
> @@ -5054,7 +5054,7 @@
>                       Can be used multiple times for multiple devices.
>
>       vga=            [BOOT,X86-32] Select a particular video mode
> -                     See Documentation/x86/boot.txt and
> +                     See Documentation/x86/boot.rst and
>                       Documentation/svga.txt.
>                       Use vga=ask for menu.
>                       This is actually a boot loader parameter; the value
is
> diff --git a/Documentation/admin-guide/ras.rst
b/Documentation/admin-guide/ras.rst
> index c7495e42e6f4..2b20f5f7380d 100644
> --- a/Documentation/admin-guide/ras.rst
> +++ b/Documentation/admin-guide/ras.rst
> @@ -199,7 +199,7 @@ Architecture (MCA)\ [#f3]_.
>     mode).
>
>   .. [#f3] For more details about the Machine Check Architecture (MCA),
> -  please read Documentation/x86/x86_64/machinecheck at the Kernel tree.
> +  please read Documentation/x86/x86_64/machinecheck.rst at the Kernel
tree.
>
>   EDAC - Error Detection And Correction
>   *************************************
> diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt
b/Documentation/devicetree/bindings/net/fsl-enetc.txt
> index c812e25ae90f..25fc687419db 100644
> --- a/Documentation/devicetree/bindings/net/fsl-enetc.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
> @@ -16,8 +16,8 @@ Required properties:
>   In this case, the ENETC node should include a "mdio" sub-node
>   that in turn should contain the "ethernet-phy" node describing
the
>   external phy.  Below properties are required, their bindings
> -already defined in ethernet.txt or phy.txt, under
> -Documentation/devicetree/bindings/net/*.
> +already defined in Documentation/devicetree/bindings/net/ethernet.txt or
> +Documentation/devicetree/bindings/net/phy.txt.
>
>   Required:
>
> @@ -51,8 +51,7 @@ Example:
>   connection:
>
>   In this case, the ENETC port node defines a fixed link connection,
> -as specified by "fixed-link.txt", under
> -Documentation/devicetree/bindings/net/*.
> +as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
>
>   Required:
>
> diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> index 12b18f82d441..efa2c8b9b85a 100644
> --- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> @@ -3,7 +3,7 @@ Amlogic Meson AXG DWC PCIE SoC controller
>   Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
PCI core.
>   It shares common functions with the PCIe DesignWare core driver and
>   inherits common properties defined in
> -Documentation/devicetree/bindings/pci/designware-pci.txt.
> +Documentation/devicetree/bindings/pci/designware-pcie.txt.
>
>   Additional properties are described here:
>
> diff --git
a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> index 7ef2dbe48e8a..14d2eee96b3d 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> @@ -97,7 +97,7 @@ Second Level Nodes - Regulators
>                   sent for this regulator including those which are for a
>                   strictly lower power state.
>
> -Other properties defined in
Documentation/devicetree/bindings/regulator.txt
> +Other properties defined in
Documentation/devicetree/bindings/regulator/regulator.txt
>   may also be used.  regulator-initial-mode and regulator-allowed-modes may
be
>   specified for VRM regulators using mode values from
>   include/dt-bindings/regulator/qcom,rpmh-regulator.h.
regulator-allow-bypass
> diff --git a/Documentation/devicetree/booting-without-of.txt
b/Documentation/devicetree/booting-without-of.txt
> index e86bd2f64117..60f8640f2b2f 100644
> --- a/Documentation/devicetree/booting-without-of.txt
> +++ b/Documentation/devicetree/booting-without-of.txt
> @@ -277,7 +277,7 @@ it with special cases.
>     the decompressor (the real mode entry point goes to the same  32bit
>     entry point once it switched into protected mode). That entry point
>     supports one calling convention which is documented in
> -  Documentation/x86/boot.txt
> +  Documentation/x86/boot.rst
>     The physical pointer to the device-tree block (defined in chapter II)
>     is passed via setup_data which requires at least boot protocol 2.09.
>     The type filed is defined as
> diff --git a/Documentation/driver-api/gpio/board.rst
b/Documentation/driver-api/gpio/board.rst
> index b37f3f7b8926..ce91518bf9f4 100644
> --- a/Documentation/driver-api/gpio/board.rst
> +++ b/Documentation/driver-api/gpio/board.rst
> @@ -101,7 +101,7 @@ with the help of _DSD (Device Specific Data),
introduced in ACPI 5.1::
>       }
>
>   For more information about the ACPI GPIO bindings see
> -Documentation/acpi/gpio-properties.txt.
> +Documentation/firmware-guide/acpi/gpio-properties.rst.
>
>   Platform Data
>   -------------
> diff --git a/Documentation/driver-api/gpio/consumer.rst
b/Documentation/driver-api/gpio/consumer.rst
> index 5e4d8aa68913..fdecb6d711db 100644
> --- a/Documentation/driver-api/gpio/consumer.rst
> +++ b/Documentation/driver-api/gpio/consumer.rst
> @@ -437,7 +437,7 @@ case, it will be handled by the GPIO subsystem
automatically.  However, if the
>   _DSD is not present, the mappings between GpioIo()/GpioInt() resources
and GPIO
>   connection IDs need to be provided by device drivers.
>
> -For details refer to Documentation/acpi/gpio-properties.txt
> +For details refer to Documentation/firmware-guide/acpi/gpio-properties.rst
>
>
>   Interacting With the Legacy GPIO Subsystem
> diff --git a/Documentation/firmware-guide/acpi/enumeration.rst
b/Documentation/firmware-guide/acpi/enumeration.rst
> index 850be9696931..1252617b520f 100644
> --- a/Documentation/firmware-guide/acpi/enumeration.rst
> +++ b/Documentation/firmware-guide/acpi/enumeration.rst
> @@ -339,7 +339,7 @@ a code like this::
>   There are also devm_* versions of these functions which release the
>   descriptors once the device is released.
>
> -See Documentation/acpi/gpio-properties.txt for more information about the
> +See Documentation/firmware-guide/acpi/gpio-properties.rst for more
information about the
>   _DSD binding related to GPIOs.
>
>   MFD devices
> diff --git a/Documentation/firmware-guide/acpi/method-tracing.rst
b/Documentation/firmware-guide/acpi/method-tracing.rst
> index d0b077b73f5f..0aa7e2c5d32a 100644
> --- a/Documentation/firmware-guide/acpi/method-tracing.rst
> +++ b/Documentation/firmware-guide/acpi/method-tracing.rst
> @@ -68,7 +68,7 @@ c. Filter out the debug layer/level matched logs when the
specified
>
>   Where:
>      0xXXXXXXXX/0xYYYYYYYY
> -     Refer to Documentation/acpi/debug.txt for possible debug layer/level
> +     Refer to Documentation/firmware-guide/acpi/debug.rst for possible
debug layer/level
>        masking values.
>      \PPPP.AAAA.TTTT.HHHH
>        Full path of a control method that can be found in the ACPI
namespace.
> diff --git a/Documentation/i2c/instantiating-devices
b/Documentation/i2c/instantiating-devices
> index 0d85ac1935b7..5a3e2f331e8c 100644
> --- a/Documentation/i2c/instantiating-devices
> +++ b/Documentation/i2c/instantiating-devices
> @@ -85,7 +85,7 @@ Method 1c: Declare the I2C devices via ACPI
>   -------------------------------------------
>
>   ACPI can also describe I2C devices. There is special documentation for
this
> -which is currently located at Documentation/acpi/enumeration.txt.
> +which is currently located at
Documentation/firmware-guide/acpi/enumeration.rst.
>
>
>   Method 2: Instantiate the devices explicitly
> diff --git a/Documentation/sysctl/kernel.txt
b/Documentation/sysctl/kernel.txt
> index f0c86fbb3b48..92f7f34b021a 100644
> --- a/Documentation/sysctl/kernel.txt
> +++ b/Documentation/sysctl/kernel.txt
> @@ -155,7 +155,7 @@ is 0x15 and the full version number is 0x234, this file
will contain
>   the value 340 = 0x154.
>
>   See the type_of_loader and ext_loader_type fields in
> -Documentation/x86/boot.txt for additional information.
> +Documentation/x86/boot.rst for additional information.
>
>   =============================================================>
> @@ -167,7 +167,7 @@ The complete bootloader version number.  In the example
above, this
>   file will contain the value 564 = 0x234.
>
>   See the type_of_loader and ext_loader_ver fields in
> -Documentation/x86/boot.txt for additional information.
> +Documentation/x86/boot.rst for additional information.
>
>   =============================================================>
> diff --git a/Documentation/translations/it_IT/process/howto.rst
b/Documentation/translations/it_IT/process/howto.rst
> index 9903ac7c566b..44e6077730e8 100644
> --- a/Documentation/translations/it_IT/process/howto.rst
> +++ b/Documentation/translations/it_IT/process/howto.rst
> @@ -131,7 +131,7 @@ Di seguito una lista di file che sono presenti nei
sorgente del kernel e che
>       "Linux kernel patch submission format"
>               http://linux.yyz.us/patch-format.html
>
> -  :ref:`Documentation/process/translations/it_IT/stable-api-nonsense.rst
<it_stable_api_nonsense>`
> +  :ref:`Documentation/translations/it_IT/process/stable-api-nonsense.rst
<it_stable_api_nonsense>`
>
>       Questo file descrive la motivazioni sottostanti la conscia decisione
di
>       non avere un API stabile all'interno del kernel, incluso cose
come:
> diff --git
a/Documentation/translations/it_IT/process/stable-kernel-rules.rst
b/Documentation/translations/it_IT/process/stable-kernel-rules.rst
> index 48e88e5ad2c5..4f206cee31a7 100644
> --- a/Documentation/translations/it_IT/process/stable-kernel-rules.rst
> +++ b/Documentation/translations/it_IT/process/stable-kernel-rules.rst
> @@ -33,7 +33,7 @@ Regole sul tipo di patch che vengono o non vengono
accettate nei sorgenti
>    - Non deve includere alcuna correzione "banale" (correzioni
grammaticali,
>      pulizia dagli spazi bianchi, eccetera).
>    - Deve rispettare le regole scritte in
> -   :ref:`Documentation/translation/it_IT/process/submitting-patches.rst
<it_submittingpatches>`
> +   :ref:`Documentation/translations/it_IT/process/submitting-patches.rst
<it_submittingpatches>`
>    - Questa patch o una equivalente deve esistere gi? nei sorgenti
principali di
>      Linux
>
> @@ -43,7 +43,7 @@ Procedura per sottomettere patch per i sorgenti -stable
>
>    - Se la patch contiene modifiche a dei file nelle cartelle net/ o
drivers/net,
>      allora seguite le linee guida descritte in
> -   :ref:`Documentation/translation/it_IT/networking/netdev-FAQ.rst
<it_netdev-FAQ>`;
> +   :ref:`Documentation/translations/it_IT/networking/netdev-FAQ.rst
<it_netdev-FAQ>`;
>      ma solo dopo aver verificato al seguente indirizzo che la patch non
sia
>      gi? in coda:
>
https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=*&q=&archive>
diff --git a/Documentation/translations/zh_CN/process/4.Coding.rst
b/Documentation/translations/zh_CN/process/4.Coding.rst
> index 5301e9d55255..8bb777941394 100644
> --- a/Documentation/translations/zh_CN/process/4.Coding.rst
> +++ b/Documentation/translations/zh_CN/process/4.Coding.rst
> @@ -241,7 +241,7 @@ scripts/coccinelle????????????????????
>
>   ???????????????????sysfs?/proc????????????
>   ??????????????????????????????
> -Documentation/abi/readme??????????????????????
> +Documentation/ABI/README??????????????????????
>
>   ?? :ref:`Documentation/admin-guide/kernel-parameters.rst
<kernelparameters>`
>   ?????????????????????????????????????
> diff --git a/Documentation/x86/x86_64/5level-paging.rst
b/Documentation/x86/x86_64/5level-paging.rst
> index ab88a4514163..44856417e6a5 100644
> --- a/Documentation/x86/x86_64/5level-paging.rst
> +++ b/Documentation/x86/x86_64/5level-paging.rst
> @@ -20,7 +20,7 @@ physical address space. This "ought to be enough for
anybody" ?.
>   QEMU 2.9 and later support 5-level paging.
>
>   Virtual memory layout for 5-level paging is described in
> -Documentation/x86/x86_64/mm.txt
> +Documentation/x86/x86_64/mm.rst
>
>
>   Enabling 5-level paging
> diff --git a/Documentation/x86/x86_64/boot-options.rst
b/Documentation/x86/x86_64/boot-options.rst
> index 2f69836b8445..6a4285a3c7a4 100644
> --- a/Documentation/x86/x86_64/boot-options.rst
> +++ b/Documentation/x86/x86_64/boot-options.rst
> @@ -9,7 +9,7 @@ only the AMD64 specific ones are listed here.
>
>   Machine check
>   ============> -Please see Documentation/x86/x86_64/machinecheck for
sysfs runtime tunables.
> +Please see Documentation/x86/x86_64/machinecheck.rst for sysfs runtime
tunables.
>
>      mce=off
>               Disable machine check
> @@ -89,7 +89,7 @@ APICs
>        Don't use the local APIC (alias for i386 compatibility)
>
>      pirq=...
> -     See Documentation/x86/i386/IO-APIC.txt
> +     See Documentation/x86/i386/IO-APIC.rst
>
>      noapictimer
>       Don't set up the APIC timer
> diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
> index 74fbb78b3c67..04df57b9aa3f 100644
> --- a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
> +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
> @@ -18,7 +18,7 @@ For more information on the features of cpusets, see
>   Documentation/cgroup-v1/cpusets.txt.
>   There are a number of different configurations you can use for your
needs.  For
>   more information on the numa=fake command line option and its various
ways of
> -configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt.
> +configuring fake nodes, see Documentation/x86/x86_64/boot-options.rst.
>
>   For the purposes of this introduction, we'll assume a very primitive
NUMA
>   emulation setup of "numa=fake=4*512,".  This will split our
system memory into
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5cfbea4ce575..a38d7273705a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3874,7 +3874,7 @@ F:
Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
>   F:  Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
>   F:  Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
>   F:  Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
> -F:   Documentation/hwmon/lochnagar
> +F:   Documentation/hwmon/lochnagar.rst
>
>   CISCO FCOE HBA DRIVER
>   M:  Satish Kharat <satishkh at cisco.com>
> @@ -11272,7 +11272,7 @@ NXP FXAS21002C DRIVER
>   M:  Rui Miguel Silva <rmfrfs at gmail.com>
>   L:  linux-iio at vger.kernel.org
>   S:  Maintained
> -F:   Documentation/devicetree/bindings/iio/gyroscope/fxas21002c.txt
> +F:   Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
>   F:  drivers/iio/gyro/fxas21002c_core.c
>   F:  drivers/iio/gyro/fxas21002c.h
>   F:  drivers/iio/gyro/fxas21002c_i2c.c
> @@ -13043,7 +13043,7 @@ M:    Niklas Cassel <niklas.cassel at
linaro.org>
>   L:  netdev at vger.kernel.org
>   S:  Maintained
>   F:  drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> -F:   Documentation/devicetree/bindings/net/qcom,dwmac.txt
> +F:   Documentation/devicetree/bindings/net/qcom,ethqos.txt
>
>   QUALCOMM GENERIC INTERFACE I2C DRIVER
>   M:  Alok Chauhan <alokc at codeaurora.org>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 8869742a85df..0f220264cc23 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1263,7 +1263,7 @@ config SMP
>         uniprocessor machines. On a uniprocessor machine, the kernel
>         will run faster if you say N here.
>
> -       See also <file:Documentation/x86/i386/IO-APIC.txt>,
> +       See also <file:Documentation/x86/i386/IO-APIC.rst>,
>         <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
available at
>         <http://tldp.org/HOWTO/SMP-HOWTO.html>.
>
> diff --git a/arch/arm64/kernel/kexec_image.c
b/arch/arm64/kernel/kexec_image.c
> index 07bf740bea91..31cc2f423aa8 100644
> --- a/arch/arm64/kernel/kexec_image.c
> +++ b/arch/arm64/kernel/kexec_image.c
> @@ -53,7 +53,7 @@ static void *image_load(struct kimage *image,
>
>       /*
>        * We require a kernel with an unambiguous Image header. Per
> -      * Documentation/booting.txt, this is the case when image_size
> +      * Documentation/arm64/booting.txt, this is the case when image_size
>        * is non-zero (practically speaking, since v3.17).
>        */
>       h = (struct arm64_image_header *)kernel;
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 8c1c636308c8..e868d2bd48b8 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -898,7 +898,7 @@ config PPC_MEM_KEYS
>         page-based protections, but without requiring modification of the
>         page tables when an application changes protection domains.
>
> -       For details, see Documentation/vm/protection-keys.rst
> +       For details, see Documentation/x86/protection-keys.rst
>
>         If unsure, say y.
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 2bbbd4d1ba31..78fdf2dd71d1 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -395,7 +395,7 @@ config SMP
>         Y to "Enhanced Real Time Clock Support", below. The
"Advanced Power
>         Management" code will be disabled if you say Y here.
>
> -       See also <file:Documentation/x86/i386/IO-APIC.txt>,
> +       See also <file:Documentation/x86/i386/IO-APIC.rst>,
>         <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
available at
>         <http://www.tldp.org/docs.html#howto>.
>
> @@ -1290,7 +1290,7 @@ config MICROCODE
>         the Linux kernel.
>
>         The preferred method to load microcode from a detached initrd is
described
> -       in Documentation/x86/microcode.txt. For that you need to enable
> +       in Documentation/x86/microcode.rst. For that you need to enable
>         CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan
the
>         initrd for microcode blobs.
>
> @@ -1329,7 +1329,7 @@ config MICROCODE_OLD_INTERFACE
>         It is inadequate because it runs too late to be able to properly
>         load microcode on a machine and it needs special tools. Instead,
you
>         should've switched to the early loading method with the initrd
or
> -       builtin microcode by now: Documentation/x86/microcode.txt
> +       builtin microcode by now: Documentation/x86/microcode.rst
>
>   config X86_MSR
>       tristate "/dev/cpu/*/msr - Model-specific register support"
> @@ -1478,7 +1478,7 @@ config X86_5LEVEL
>         A kernel with the option enabled can be booted on machines that
>         support 4- or 5-level paging.
>
> -       See Documentation/x86/x86_64/5level-paging.txt for more
> +       See Documentation/x86/x86_64/5level-paging.rst for more
>         information.
>
>         Say N if unsure.
> @@ -1626,7 +1626,7 @@ config ARCH_MEMORY_PROBE
>       depends on X86_64 && MEMORY_HOTPLUG
>       help
>         This option enables a sysfs memory/probe interface for testing.
> -       See Documentation/memory-hotplug.txt for more information.
> +       See Documentation/admin-guide/mm/memory-hotplug.rst for more
information.
>         If you are unsure how to answer this question, answer N.
>
>   config ARCH_PROC_KCORE_TEXT
> @@ -1783,7 +1783,7 @@ config MTRR
>         You can safely say Y even if your machine doesn't have MTRRs,
you'll
>         just add about 9 KB to your kernel.
>
> -       See <file:Documentation/x86/mtrr.txt> for more information.
> +       See <file:Documentation/x86/mtrr.rst> for more information.
>
>   config MTRR_SANITIZER
>       def_bool y
> @@ -1895,7 +1895,7 @@ config X86_INTEL_MPX
>         process and adds some branches to paths used during
>         exec() and munmap().
>
> -       For details, see Documentation/x86/intel_mpx.txt
> +       For details, see Documentation/x86/intel_mpx.rst
>
>         If unsure, say N.
>
> @@ -1911,7 +1911,7 @@ config X86_INTEL_MEMORY_PROTECTION_KEYS
>         page-based protections, but without requiring modification of the
>         page tables when an application changes protection domains.
>
> -       For details, see Documentation/x86/protection-keys.txt
> +       For details, see Documentation/x86/protection-keys.rst
>
>         If unsure, say y.
>
> diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
> index f730680dc818..59f598543203 100644
> --- a/arch/x86/Kconfig.debug
> +++ b/arch/x86/Kconfig.debug
> @@ -156,7 +156,7 @@ config IOMMU_DEBUG
>         code. When you use it make sure you have a big enough
>         IOMMU/AGP aperture.  Most of the options enabled by this can
>         be set more finegrained using the iommu= command line
> -       options. See Documentation/x86/x86_64/boot-options.txt for more
> +       options. See Documentation/x86/x86_64/boot-options.rst for more
>         details.
>
>   config IOMMU_LEAK
> diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
> index 850b8762e889..90d791ca1a95 100644
> --- a/arch/x86/boot/header.S
> +++ b/arch/x86/boot/header.S
> @@ -313,7 +313,7 @@ start_sys_seg:    .word   SYSSEG          # obsolete
and meaningless, but just
>
>   type_of_loader:     .byte   0               # 0 means ancient bootloader,
newer
>                                       # bootloaders know to change this.
> -                                     # See Documentation/x86/boot.txt for
> +                                     # See Documentation/x86/boot.rst for
>                                       # assigned ids
>
>   # flags, unused bits must be zero (RFU) bit within loadflags
> diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
> index 11aa3b2afa4d..33f9fc38d014 100644
> --- a/arch/x86/entry/entry_64.S
> +++ b/arch/x86/entry/entry_64.S
> @@ -8,7 +8,7 @@
>    *
>    * entry.S contains the system-call and fault low-level handling
routines.
>    *
> - * Some of this is documented in Documentation/x86/entry_64.txt
> + * Some of this is documented in Documentation/x86/entry_64.rst
>    *
>    * A note on terminology:
>    * - iret frame:    Architecture defined interrupt frame from SS to RIP
> diff --git a/arch/x86/include/asm/bootparam_utils.h
b/arch/x86/include/asm/bootparam_utils.h
> index f6f6ef436599..101eb944f13c 100644
> --- a/arch/x86/include/asm/bootparam_utils.h
> +++ b/arch/x86/include/asm/bootparam_utils.h
> @@ -24,7 +24,7 @@ static void sanitize_boot_params(struct boot_params
*boot_params)
>        * IMPORTANT NOTE TO BOOTLOADER AUTHORS: do not simply clear
>        * this field.  The purpose of this field is to guarantee
>        * compliance with the x86 boot spec located in
> -      * Documentation/x86/boot.txt .  That spec says that the
> +      * Documentation/x86/boot.rst .  That spec says that the
>        * *whole* structure should be cleared, after which only the
>        * portion defined by struct setup_header (boot_params->hdr)
>        * should be copied in.
> diff --git a/arch/x86/include/asm/page_64_types.h
b/arch/x86/include/asm/page_64_types.h
> index 793c14c372cb..288b065955b7 100644
> --- a/arch/x86/include/asm/page_64_types.h
> +++ b/arch/x86/include/asm/page_64_types.h
> @@ -48,7 +48,7 @@
>
>   #define __START_KERNEL_map  _AC(0xffffffff80000000, UL)
>
> -/* See Documentation/x86/x86_64/mm.txt for a description of the memory
map. */
> +/* See Documentation/x86/x86_64/mm.rst for a description of the memory
map. */
>
>   #define __PHYSICAL_MASK_SHIFT       52
>
> diff --git a/arch/x86/include/asm/pgtable_64_types.h
b/arch/x86/include/asm/pgtable_64_types.h
> index 88bca456da99..52e5f5f2240d 100644
> --- a/arch/x86/include/asm/pgtable_64_types.h
> +++ b/arch/x86/include/asm/pgtable_64_types.h
> @@ -103,7 +103,7 @@ extern unsigned int ptrs_per_p4d;
>   #define PGDIR_MASK  (~(PGDIR_SIZE - 1))
>
>   /*
> - * See Documentation/x86/x86_64/mm.txt for a description of the memory
map.
> + * See Documentation/x86/x86_64/mm.rst for a description of the memory
map.
>    *
>    * Be very careful vs. KASLR when changing anything here. The KASLR
address
>    * range must not overlap with anything except the KASAN shadow area,
which
> diff --git a/arch/x86/kernel/cpu/microcode/amd.c
b/arch/x86/kernel/cpu/microcode/amd.c
> index e1f3ba19ba54..06d4e67f31ab 100644
> --- a/arch/x86/kernel/cpu/microcode/amd.c
> +++ b/arch/x86/kernel/cpu/microcode/amd.c
> @@ -61,7 +61,7 @@ static u8 amd_ucode_patch[PATCH_MAX_SIZE];
>
>   /*
>    * Microcode patch container file is prepended to the initrd in cpio
> - * format. See Documentation/x86/microcode.txt
> + * format. See Documentation/x86/microcode.rst
>    */
>   static const char
>   ucode_path[] __maybe_unused =
"kernel/x86/microcode/AuthenticAMD.bin";
> diff --git a/arch/x86/kernel/kexec-bzimage64.c
b/arch/x86/kernel/kexec-bzimage64.c
> index 22f60dd26460..b07e7069b09e 100644
> --- a/arch/x86/kernel/kexec-bzimage64.c
> +++ b/arch/x86/kernel/kexec-bzimage64.c
> @@ -416,7 +416,7 @@ static void *bzImage64_load(struct kimage *image, char
*kernel,
>       efi_map_offset = params_cmdline_sz;
>       efi_setup_data_offset = efi_map_offset + ALIGN(efi_map_sz, 16);
>
> -     /* Copy setup header onto bootparams. Documentation/x86/boot.txt */
> +     /* Copy setup header onto bootparams. Documentation/x86/boot.rst */
>       setup_header_size = 0x0202 + kernel[0x0201] - setup_hdr_offset;

For the arm, arm64 and x86 kexec bits:

Reviewed-by: Bhupesh Sharma <bhsharma at redhat.com>

Thanks,
Bhupesh