similar to: Installing Damn Small Linux and R

Hi, The bios is not able to boot from usb, but only from floppy. I want to boot an Ubuntu-installation from usb. The iso-file was moved with usb-creator to the usb-stick. I have got a boot-floppy, which starts an DamnSmallLinux usb-stick. But this bootfloppy doesn't start the Ubuntu-usb-stick. Which parameters in syslinux.cfg I must change to start Ubuntu-Linux? There are the following

On 03/19/2017 01:12 AM, Ady Ady via Syslinux wrote: > Regarding distros for older computers, there are several. The > problem, at least at this point, is bootability. Although Antix is > for older computers, it is also based on Debian and the latest > ISOLINUX will also be bigger than 32KiB. Perhaps Knoppix or some (of > the many) PuppyLinux would still use ISOLINUX 4.xx or older.

Dear, "Xenoppix-x86-64(Xen3.0.2+KNOPPIX-x86_64-5.0.1) CD size" is released. http://unit.aist.go.jp/itri/knoppix/xen/index-en.html Xenoppix-x86-64 exploits latest CPU (Intel Core2 Duo and AMD Athlon64). * Xenoppix-x86-64 boots both X86 and X86_64 linux kernel on HVM of Xen. * Xenoppix-x86-64 looks like KNOPPIX but all packages are replaced for X86_64. * Xenoppix-x86-64 also

Dear, New Xenoppix is released. http://unit.aist.go.jp/itri/knoppix/xen/index-en.html It has new fueature (Xenoppix-terminal-server and install2win). It bases on KNOPPIX 4.0.2 DVD or CD. (The size of Xenoppix is sitll over 700MB, please burn a DVD-ROM.) New feature (Experimental) *Act as a terminal server. Xenoppix can be a Terminal Server and boots clinet PC with PXE network

Dear, We released new VMKNOPPIX for x86/x86_64. http://unit.aist.go.jp/itri/knoppix/vmknoppix/index-en.html VMKNOPPIX-CD for x86 (20071101) VMKNOPPIX-CD for x86_64 (20071107) This version includes Xen3.1.1, KVM48, x86_64 kernel with IA32 emulator, etc. The included software is as follows. KNOPPIX 5.1.1 (kernel 2.6.19) with Xen3.1.1 (DomU&HVM)

David Christensen wrote: > It seems that most Linux distributions I look at are dropping support > for 32-bit hardware. Aren't you using Debian? AFAIK jessie supports i586, so if Pentium is old enough for you you're good to go for likely at least two more years. After that I guess I'd be using old unsupported Debians for the ancient ones. I don't have this old hw on the

Dear, We released New Xenoppix (based on Xen3.0, CD size). Detail HP http://unit.aist.go.jp/itri/knoppix/xen/index-en.html 670MB knoppix_v4.0.2CD_20050923_xen3.0-20060104+IPAFont_cdsize.iso --------------------------------- # New Features * Xen is updated to version 3.0. * Host-Xenoppix(Knoppix on Domain0) boots Guest-Xenoppix(Knoppix on DomainU) with same kernel and same Root

Hello, I hope that somebody can help me, I am trying to boot Knoppix from the third parition of an ipod nano with out loosing the player capabilities. After fdisk I have the following partitions: slr ~ # fdisk -l /dev/sda Disk /dev/sda: 4095 MB, 4095737344 bytes 255 heads, 63 sectors/track, 497 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End

Installing R on Knoppix Knoppix is a small LINUX distribution (http://www.knoppix.net/) runnable from a CD (without an installation) It can be also installed on a hard drive from a single CD. The idea was to reuse an old laptop with 6gb hard drive and 128mb memory. I had few days experience with Linux and few years experience with R. The latter was not required :-) The Knoppix installation

Hi, some time ago I tried to boot an isolinux boot loader from another one to be able to boot e.g. a Knoppix CD with its original boot loader and menus from a "main" isolinux on a multiboot DVD. This works for isolinux <= 3.07 now! However, newer isolinux boot loaders have some problems and the isolinux (e.g. of the Knoppix CD) loaded from the multiboot DVD's main isolinux

Hello -- The output of the getent passwd command was the following: <username>@<domainname>:*:##########:##########::/PHShome/<username>:/bin/PHSshell ________________________________ From: Data Control Systems - Mike Elkevizth [mike at datacontrolsystems.com] Sent: Wednesday, June 08, 2016 6:12 PM To: Kaplan, Andrew H. Cc: samba-technical at lists.samba.org; samba at

Hello -- We are running the 14.04.3 LTS 64-bit release as a virtual machine on a Vmware appliance. The goal of the installation is to create a Samba server that utilizes Active Directory authentication. To that end I utilized the following procedure:

On Wed, Jun 08, 2016 at 07:46:00PM +0000, Kaplan, Andrew H. wrote: > Hello -- > > We are running the 14.04.3 LTS 64-bit release as a virtual machine on a Vmware appliance. The goal of the installation is to create a Samba server that utilizes Active Directory authentication. To that end I utilized the following procedure: > >

I am trying to use Syslinux as my boot loader for a stripped down version of Knoppix (DSL) on a USB Pen Drive. I followed the instructions verbatim on http://rz-obrian.rz.uni-karlsruhe.de/knoppix-usb/knoppix-usb.html, but no luck. The system will start to boot to the USB, but gives a Kernel Panic. I will give all information that shows on the screen. After I select Boot from USB (which on my

Hi, If you have the "template = /bin/bash" option, I think it is more likely something wrong with the way ssh is trying to authenticate the username. Do a "getent passwd" and then try "ssh -v '<username exactly as getent returns it (case sensitive)>'@<fqdn of server>. If it doesn't work, post the output of what ssh generates. Mike E. On Thu,

I may not agree with everything they say, such as ISPConfig (I prefer webmin) but this tutorial offers a "step by step opportunity for newbies". Does this indicate that CentOS is now a "mainstream" distro? (Technically speaking its not CentOS 4.3 but CentOS 4 Update 3 but we are not into semantics). Article on Slash :- http://linux.slashdot.org/linux/06/05/01/1049254.shtml

Hi, Try using the format <domainname><winbind separator><username> to login instead of <username>@<domainname>. I'm not sure why, and don't have time to check into it right now, but ssh doesn't like the <username>@<domainname> format for me either. The default winbind separator is a backslash "\", so you'll have to escape it,

On 10/06/16 12:47, Kaplan, Andrew H. wrote: > Hello -- > > I started a thread on the list that you suggested in your e-mail, and thank-you for the reference. > > Also, I checked the auth.log file on the server, and the following entries were present: > > I checked the auth.log file, and the following entries were present: > > Jun 10 07:10:50 <samba server>

Hi! I have a PXE Server witch uses a the simple menu system. Is all working great also with submenus. What i want is a entry in the pxelinux.cfg/default file that can load a non-menu cfg file for the pxelinux.0. The background is, that i have here a DamnSmallLinux that is booting from PXE. it has a own cfg file but without the simple menu system (with F1-F2-F3 and a logo.16). If i move

Hi, Does anyone know of a good guide to installing distros to usb flash drives ....? I read this one but its making much sense http://www.damnsmalllinux.org/talk/node/86 Do I need to change drives in this manner for it to work ? Dave T.