similar to: using R and for simulating a wireless network

I am trying to resolve a problem with NetBIOS wildcard broadcast queries being relayed/repeated by around 50 US Robotics wireless access points. The APs only re-broadcast wildcard queries from our samba3 server - our numerous windows 2003 servers do not appear to use wildcard broadcast queries (if they do, they are not causing the same problems). Any help would be appreciate as this problem is

All, I am wondering how one PC with a wired and wireless connection can have the wired IP active as long as there is a connection then if the wired connection goes away to then automatically, go wireless, then if wired comes back alive go back to wired. Is that kind of setup possible, if so how. This unit is always on - I just want whichever network is active and faster to be the active

Dear R folks, I need to simulate first passage times for iterated partial sums. The related papers are for example [1][2]. As a start I want to simulate how long a simple random walk stays negative, which should result that it behaves like n^(-?). My code looks like this. -------- 8< -------- code -------- >8 -------- n = 100000 # number of simulations length = 100000 # length of

I am wondering if there is anyone out there that I can bounce some questions off of in regards to setting this up. I have a wireless network side that I want connect to the secure side wireless(XP) ---------> access-point----(wired-nic-1)----tinc-server------(nic-2-wired)-----secure network wireless(XP) ---------> if anyone has any suggestions or

Hi all and greetings from Australia, I am looking at a suitable VPN to secure a wireless notebook hanging off a private, wired network. Is tinc suitable for this? specifics: "notebook" 192.168.205.63 "AProuter" (access point/computer that the notebook will connect to): 192.168.205.31 What numbers should I give to the various nodes? At this stage, only one notebook VPN:ed

Hello. I'm wondering if a scenario which I'm tasked to setup would be feasible to create with libvirt. The scenario is; we want to have one computer running ns-3[1] which will simulate a MANET[2] this computer will be connected to a second computer(how is not quite clear to me yet) this second computer will be running several Xen or LXC domains where each domain is connected to a node in

Hello all, I'm wondering if there's any interest in trying to bond em1 and eth0 (respectively wired and wireless interfaces here), and if any, how to do it in CentOS6. I've found this, which could possibly help (but I'm failing yet): http://r.outlyer.net/linux:bonding https://help.ubuntu.com/community/UbuntuBonding Both are dealing w/ ifenslave. Any experience or point of

Hi, we have recently installed samba and it all works fine on our cabled network. We are using roaming profiles. Logging on is running at pretty quick speeds (no slower than my PC used to be logging on to Novell without roaming profiles). We also have a wireless network that is running on a different subnet and is connected to the main network using a vpn tunnel. The delimiting factor here

I need to demo a Grandstream phone to a customer, but his IT is not able to give me for the demo a Ethernet cable with DHCP!!! I need therefore a "wireless hub" ??? with the upstream connection to wireless!!! Since I do not know how to name it I cannot google it! Has anybody done such thing? bye Ronald

Hi All, I have installed Atomic Bomberman as described here: https://wiki.archlinux.org/index.php/Atomic_bomberman When I connect 2 PC's running linux via networkcables and a switch, IPX works perfectly. I start the game on both PC's, set PC A to "Start Network game" via IPX, and PC B to "Join network game". Now PC B can see the game of PC A, connect to it, and then

Hi, I have a IBM ThinkPat T30 a Cisco Aironet wireless internal in the laptop 802.11b only. It works great with open Acess points, but when i try to connect to encripted ones. I got the dialog box asking for the passphrase 128 bit, I enter it and after that i receive the dialog box again! Maybe my card do not support WEP or I am doing something wrong? Here is part of what i can see on

hi all , i just met a strange problem about my wireless network , i installed ipw3945 driver and it can detect the wireless network lists around my laptop ,but , i can't connect to the wireless network even under the right authority my centos 5.2 dectected my wirless network card as eth1 , it's really strange , i think any help ? thx and wish you a happy new year :) -- Keep It Simple

Hi CentOS users I just installed the CentOS 5.5 version on my toshiba laptop. I did the configuration that i had for the wireless settings but still i could not connect to my home wireless network. So someone please guide me on how i can connect my laptop to my wireless home network. Thanks Jatin

Hi. We have a Windows laptop that has gotten too slow, it's borderline unusable, so I burned a CentOS 5.2 32-bit Live CD, just to try it out in the home. It boots up fine, but it does not connect to the Internet... Now we normally connect through a wireless network, there are several around here -- on the Windows box we choose the network to which to connect... but on CentOS there is

I am looking for completly wireless desktop phones. Until I realized we needed wireless i was going to use polycom soundpoint 501's. Any suggestions on a comparable wireless phone? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070328/88e22671/attachment.htm

I currently am using CentOS 4.4 desktop computer. What would I need to recieve an internet signal from a wireless router that is connected to an Apple computer that is located upstairs? I am in the basement less than 150 feet from the Apple computer. I do not have wireless card in the CentOS desktop computer and am looking for a card to install to accomplish this. -- Richard Miles Federal Way

Firstly, let me just say I am new to asterisk and if anything I've said is covered in an FAQ or in previous posts I apologise but I have tried searching and I've attempted a few of the things I found but they didn't help. Has anybody got any experience using an X100P on an NTL phone line in the UK (I'm in an ex Cable & Wireless area if that makes any difference). The

Hi all, not sure this should be post here.... but i hope some one could help me. :> I''m newbie in the ebtables MAC address NAT and filtering stuff... i want to bridge a wireless client to a wired network, problem is AP would not accept frame not initiate from associated STA... so i guess i could solve it by natting mac with ebtables stuff.. question goes below.... 1.

For those of you who use a wireless router and may work on one or two (or even several) machines in your computer room, an AP Client is a nice solution. When you move to another machine you can just move the wireless net adapter to the new machine and you're up and running on the network immediately. I've been using a D-Link G730AP for a while -- but it's not really made for this --

greetings in setting up a mixed network of CentOS, WinThings, Cisco, and more... i need a lil' feedback please re: practical wireless WPA settings... i always just used WPA PSK and TKIP by defauly (never thought about any issues here before, DUH!) yet i have done some reading while searching recently and it appeared to inform me that ummmm if using WPA-PSK that one should use AES instead of