similar to: R and RS232-Interface?

Hi I have written a graphical user interface using tcltk. Now I would like to run it under rterm.exe with a batch file. I tried the following code written in a .bat file: d:\R\rw1071\bin\Rterm.exe --no-restore --no-save <d:\RGui.r> d:\RGui.out The problem is that rterm does open but the gui isn't running properly. After a few seconds rterm is closeing without doing anything more

Sehr geehrte Damen und Herren, An der Fachhochschule Winterthur wurde f??r mich im Rahmen einer Diplomarbeit (Prof. Ruckstuhl) ein R-Programm zur Auswertung von IR-Spektren (line-shape-Analyse zur quantitativen Analyse von Gasmischungen) entwickelt. Die Daten werden einer Excel-Tabelle entnommen. Bisher werden die spektroskopischen Daten ??ber den Inhalt von 64 Kan??len ??ber die

I installed Board Master a software that control a CNC machine to produce PCB (Printed Circuit Board). The software install flawlessly but to check if it works I need RS232 working to control CNC machine. I tried to set connection parameters in Board Master choosing COM1 (the only available) but CNC machine don't move and software keep asking for switching machine on. Of course software and

a friend gave me an old apc smart-ups 1250 it has a rs232 interface but i have no pc with a rs232 port i attempted to use a rs232 to usb adapter but the ups goes nuts i connected the ups to batteries and verified it was working properly when i plug the usb cable into the pc the ups shuts down when i attempt to turn it on it beeps twice and shuts down this all occurs before i start the nut software

On 5/28/19 3:39 PM, Julian H. Stacey wrote: > grumpy at mailfence.com wrote: >> a friend gave me an old apc smart-ups 1250 >> it has a rs232 interface but i have no pc with a rs232 port >> i attempted to use a rs232 to usb adapter but the ups goes nuts >> i connected the ups to batteries and verified it was working properly >> when i plug the usb cable into the pc

On Tue, 28 May 2019, nicolae788 wrote: > Apc uses a propietary serial cable and your convertar for sure it's wired > standard. Refer to the following link for info. > https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml > > Good luck > > On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > >> a friend gave me an old apc smart-ups 1250

Hello All, I recently upgraded one of my HP-UX servers from Samba 2.2.4 to 2.2.7. Since that time, I have noticed that disk activity on the file system where the Samba var directory is kept seems to be higher than I would expect. We have now begun to experience a problem with PC clients running National Instruments' LabView software, installed on a Samba share. When any PC client tries to

Hi all, Is there a method in centos where a program can be started that listens on a given IP port and when something connects it will transfer data from the RS232 port to the IP port. reads and writes of course. Trying not to reinvent the wheel if I dont have to... Thanks, Jerry

Hello all. This is a question that I should be able to answer, but the old grey cells aren't working. My Google-Fu must not be up to snuff, either. I have a MOXA IP-RS232 converter that I'm going to be using over an RF WAN and I need to confirm the actual data rate that I'll be able to achieve. I have the drivers loaded (/dev/ttyr00) and a loopback plug on the end of the device. I

Hello guys. I am new in mac world and in wine apps. I have this singular situation: I have a macbook with wine and winebottler installed. I want to use this exe app: azloader.exe. Ok, wine is able to load it normally. But... the problem is, my macbook has not the RS-232 port. So I bought a RS-232 to USB adapter. I've installed the correct "drive" to use that. I've tried that in

Hi Recently i bought a MicroDoWell BP50, and with it followed a USB 2 serial converter. When i plug it into my 2.6.19 kernel, dmesg shows hiddev96: USB HID v1.10 Device [Cyber Power System CPS RS232 USB BRIDGE for UPS] on usb-0000:00:04.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver So, i figured i should use usbhid-ups,

Hi, we are looking for a new workstation for big datasets/applications (easily up to 100'000 records and up to 300 Variables) using R. As an example: Variable Selection for a multivariate regression using stepAIC. What is the best configuration for a workstation to reach a high performance level for computing with R? Single core or multi core (is R together with nws package really able to

Hello. One of my clients asked if it would be possible to have an IDE which could use type discovery for R functions to make flow-like construction of an R program. Something like a LabView graphical composition of processing elements. They called this type of program composition a "workflow". I looked at some of this programs, like: * Orange http://orange.biolab.si/ * RedR

Hello, All: What would you recommend for software to support developing software in languages other than R? I'm currently writing code in R to implement algorithms that may ultimately need to run with asynchronous, distributed computing in various languages including Python, Matlab, LabVIEW, vanilla Unix, etc. I routinely use the "R CMD check", etc., process

Hi, Reference: > From: Manuel Wolfshant <wolfy at nobugconsulting.ro> > Date: Tue, 28 May 2019 16:42:21 +0300 Manuel Wolfshant wrote: > On 5/28/19 3:39 PM, Julian H. Stacey wrote: > > grumpy at mailfence.com wrote: > >> a friend gave me an old apc smart-ups 1250 > >> it has a rs232 interface but i have no pc with a rs232 port > >> i attempted to

grumpy at mailfence.com wrote: > a friend gave me an old apc smart-ups 1250 > it has a rs232 interface but i have no pc with a rs232 port > i attempted to use a rs232 to usb adapter but the ups goes nuts > i connected the ups to batteries and verified it was working properly > when i plug the usb cable into the pc the ups shuts down > when i attempt to turn it on it beeps twice

Apc uses a propietary serial cable and your convertar for sure it's wired standard. Refer to the following link for info. https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml Good luck On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > a friend gave me an old apc smart-ups 1250 > it has a rs232 interface but i have no pc with a rs232 port > i attempted to use

Ubuntu creates /dev/ttyUSB0 for me when I plug in the usb-to-serial-adapter. I have a symbolic-link to /dev/ttyUSB0 from 'dosdevices/com1'. What is new in 10.04 Ubuntu is that I have to sudo chmod o+r and sudo chmod o+w on /dev/ttyUSB0 every time before I start the app which uses that serial line. ttyUSB0 goes away when I unplug the serial adapter from the USB port or shut down the

Hello all, Last week I rescued and UPS from the trash (it's really amazing the kind of things you can find in the trash of the university research labs). No manual, no cd, no cables, just the unit. It's name is "Blizzo 500", and blizzo was just the rebranding of a spanish reseller which has been out of the scene for nearly two years now, at least according to the wayback

Hi all I have a problem switch in our data centre, which is connected to a linux server via a serial cable. I know I can / could access the switch from my Windows PC back at the office, using hyperterm, but trying to access it using minicom just doesn't seem to work. I have changed the comms in minincom to use /dev/tty0 & the baud rate to 9600, yet I can't seem to connect with