similar to: Any difference in cbind() b/w SPLus and R??

Hi, I have updated the firmware for perc raid controller card, network card, IDRAC firmware and the BIOS version on Dell R720 server. I have installed CentOS 6.4 and updated with all the latest packages using yum -y update. # cat /var/log/messages | grep -i error Sep 23 14:09:35 x24 kernel: ERST: Error Record Serialization Table (ERST) support is initialized. Sep 23 14:09:35 x24 kernel: ACPI

we have several R900 servers with PERC 6/E card in it. Recently it we getting some message on /var/log/message say change to "write back" and change back to "write through". We figure out it is PERC 6/E card battery weak. My questions are: 1. some battery only use one year (some even shorter) and already this problem. 2. How come PERC 5/E does not have this issue? 3.

we have several DELL R900 with PERC 6/E adapter in it. R900 using Redhat Linux. Each R900 have two PERC 6/E adapter and at least two MD1000 connect to it. Configuration 1: PERC 6/E -- two MD1000 PERC 6/E -- empty Configuration 2: PERC 6/E -- MD1000 PERC 6/E -- MD1000 Normally first MD1000 for database and second MD1000 for nightly backup. My

Hi, I've built a function to generate plots and would like to be able pass in column names as a parameter. Here's a boiled down version of what I have right now: pmts <- data.frame(date=c(1,2,3), all=c(5,6,7),maj=c(4,5,6),ind=c(3,4,5)) perc.mktshare <- function(df){ range1 <- floor(min(with(df, 100*ind/all))) range2 <- ceiling(max(with(df, 100*ind/all)))

Dear R-users, I recently began using the ggplot2 package and I am still in the process of getting used to it. My goal would be to plot on the same grid a number of curves derived from two distinct datasets. The first dataset (called molten.data) looks like this : Column names : Perc, Week, Weight P10 21 333.3554 P90 21 486.0480 P10 22 452.6347 P90 22 563.8263 P10 23 575.0960 P90

Hi folks: At work, I have an R510, and R610 and an R710 - all with the H700 PERC controller. Based on experiments, it seems like there is no way to bypass the PERC controller - it seems like one can only access the individual disks if they are set up in RAID0 each. This brings me to ask some questions: a. Is it fine (in terms of an intelligent controller coming in the way of ZFS) to have the

Running CentOS 6.7, on an older HP DL580 G5. We've got a Dell 12-bay RAID box plugged into a PERC H800 (aka LSI Liberator) that we put in the HP, and that works fine. We've got a new RAID (a JetStor), and are trying to plug it in. The layout is that the Dell RAID is dual-pathed DAS. Each PERC has two DAS ports. We've got the Dell RAID in the top port of each PERC. I *thought* I could

Hello! Can you help me? How to order an data.table by values of an column? Per example: Table no initial Categ Perc 468  31.52 351  27.52 0  0.77 234  22.55 117  15.99 table final Categ Perc 0  0.77 117  15.99 234  22.55 351  27.52 468  31.52 Lesandro Veja quais são os assuntos do momento no Yahoo! +Buscados [[alternative HTML version deleted]]

Does anyone know if a PERC H200 is a real RAID controller? I'm about to build a box to CentOS 6.5 (it was Windows...) with RAID 6 on Monday, and this PE R610 has this.... I'm familiar with PERC 6 and 7s, but just dunno 'bout this one. mark

Hi, I have a matrix (pwdiff in the example below) with ~480000 rows and 780 columns. For each row, I want to get the percentage of columns that have an absolute value above a certain threshold "t". I then want to allocate that percentage to matrix 'perc' in the corresponding row. Below is my attempt at doing this, but it does not work: I get 'replacement has length

Hello, I'm curiuos if anyone knows if it's possible to set up a Dell R515 (which has PERC H700) to be JBOD. It seems the only options are RAID0 or RAID1. I read posts, where people say it can by done by making each disk its own RAID0.? This works, but it wigs out when that disk is removed, and forgets a disk was ever there (unless I go back in the PERC and fix it). My plan is to have a

Hi, I am trying to use the Simple Menu system for SYSLINUX/ISOLINUX, but it fails to work. The menu apper, I can select menu entries, but pressing "ENTER" just takes me back to start. It seem like menu.c32 just reloads. Pressing Space does almost the same, exept the selected item is the one on the bottom instead of the top. By pressing ESC and getting back to command line, I am able

Here is info. about the Raid controllers. Doesn't seem to be the culprit. Slow host: Name PERC H710 Mini (Embedded) Firmware Version 21.3.4-0001 Cache Memory Size 512 MB Fast Host: Name PERC H310 Mini (Embedded) Firmware Version 20.12.1-0002 Cache Memory Size 0 MB Slow host: Name PERC H310 Mini (Embedded) Firmware Version 20.13.1-0002 Cache Memory Size 0 MB Slow host: Name PERC H310 Mini

I have an older Dell PowerEdge server with one hard drive, with CentOS 7 currently installed. I wanted to do a clean install of CentOS 8, but it doesn't pick up the hard drive. When I click on the destination to pick the hard drive it only shows the USB drive that I'm installing from. I checked for a RAID configuration on the server, but there is only one disk, and no RAID is configured.

We have several DELL R900 server with PERC 6/E adapter in it. O.S. is CENTOS 5.5. recently one of server continue pop-up messages on /var/log/message for switch status between "write back" and "write through". ============================== Dec 6 08:09:31 host01 Server Administrator: Storage Service EventID: 2189 The controller write policy has been changed to Write Back.:

smartctl, hdparm, and sdparm all are valuable tools to obtain hard drive info. But, they don't seem to work, at least, on obtaining hard drive info from drives on a Dell PERC controller. Instead, I'm given basic PERC controller info, not drive info. Is there a tool to let me get the hard drive make/model/serial numbers from a hardware RAID setup? Thanks. Scott

I'm trying to produce a barchart plot with groups, in which each group is placed in a particular time scale in x-axis. If I use barchart directly it does not take the time scale. I've tried with xyplot and adding a panel.barchart, I have the bars in the right place, but not the three groups I'm trying to produce. I've tried defining panel and panel.group, but can't get it to

Dear List members I am using the regsubsets function to select a few predictor variables using Mallow's Cp: > sel.proc.regsub.full <- regsubsets(CO2 ~ v + log(v) + v.max + sd.v + tad + no.stops.km + av.stop.T + a + sd.a + a.max + d + sd.d + d.max + RPA + P + perc.stop.T + perc.a.T + perc.d.T + RPS + RPSS + sd.P.acc + P.dec + da.acc.1 + RMSACC + RDI + RPSI + P.acc + cov.v + cov.a +

What is your gluster setup? Please share volume details where vms ate stored. It could be that the slow host is having arbiter volume. Alex On Feb 26, 2018 13:46, "Ryan Wilkinson" <ryanwilk at gmail.com> wrote: > Here is info. about the Raid controllers. Doesn't seem to be the culprit. > > Slow host: > Name PERC H710 Mini (Embedded) > Firmware Version

Hello All, I encountered the same problem as reported to this list earlier, http://lists.freebsd.org/pipermail/freebsd-stable/2009-February/048305.html, but then with 7.1-RELEASE-p4. Interestingly enough, FreeBSD booted fine on the machine installed (updated from 7.0 to 7.1-RELEASE-p4). This machine is a PowerEdge 1850 bios A04 with Perc 43/Si bios H430 / fwVer 521S. When booting a drive