similar to: blue screen: clock interrupt win2008

Hi, im trying to attach another volume aka disk to win HVM, however it doesn''t seem to work: + xm block-attach win2008ss phy:/dev/zvol/dsk/pool1/win2008ss.dsk2 \ hdd:disk w 0 results in: elkner.sol ~ > + xm block-list win2008ss --long (0 (vbd (uuid 7cb8fadf-619d-dde6-bda9-dcc18023c7d5) (bootable 1) (devid 768) (driver paravirtualised)

Currently I''m trying to figure out the best zfs layout for a thumper wrt. to read AND write performance. I did some simple mkfile 512G tests and found out, that per average ~ 500 MB/s seems to be the maximum on can reach (tried initial default setup, all 46 HDDs as R0, etc.). According to http://www.amd.com/us-en/assets/content_type/DownloadableAssets/ArchitectureWP_062806.pdf I would

Hi, S10U3: It seems, that ufs POSIX-ACLs are not properly translated to zfs ACL4 entries, when one xfers a directory tree from UFS to ZFS. Test case: Assuming one has an user A and B, both belonging to group G and having their umask set to 022: 1) On UFS - as user A do: mkdir /dir chmod 0775 /dir setfacl -m d:u::rwx,d:g::rwx,d:o:r-x,d:m:rwx /dir # samba would

Hi, does anybody have the R logo in a vector format preferable SVG? Need it for Freedesktop (GNOME desktop) integration of Rcmdr ... Thanx, jel. -- Otto-von-Guericke University http://www.cs.uni-magdeburg.de/ Department of Computer Science Geb. 29 R 027, Universitaetsplatz 2 39106 Magdeburg, Germany Tel: +49 391 67 12768

Hi, just found: PSARC/2010/250 EOF of Solaris xVM dom0 approved. So does this mean, Xen is officially dead on Solaris? Regards, jel. -- Otto-von-Guericke University http://www.cs.uni-magdeburg.de/ Department of Computer Science Geb. 29 R 027, Universitaetsplatz 2 39106 Magdeburg, Germany Tel: +49 391 67 12768

Hi, just found on a X4500 with S10u6: fmd: [ID 441519 daemon.error] SUNW-MSG-ID: ZFS-8000-GH, TYPE: Fault, VER: 1, SEVERITY: Major EVENT-TIME: Wed Feb 11 16:03:26 CET 2009 PLATFORM: Sun Fire X4500, CSN: 00:14:4F:20:E0:2C , HOSTNAME: peng SOURCE: zfs-diagnosis, REV: 1.0 EVENT-ID: 74e6f0ec-b1e7-e49b-8d71-dc1c9b68ad2b DESC: The number of checksum errors associated with a ZFS device exceeded

Hi list, I''ve got a system with 3 WD and 3 seagate drives. Today I got an email that zpool status indicated one of the seagate drives as REMOVED. I''ve tried clearing the error but the pool becomes faulted again. Taken out the offending drive and plugged into a windows box with seatools install. Unfortunately seatools finds nothing wrong with the drive. Windows seems to see

Hi, does anybody know, how to enforce a certain encoding for readCitationFile()? Haven't found any usable documentation for this :( E.g.: basecit <- system.file("CITATION", package="base") source(basecit, echo=TRUE, encoding="8859-1") readCitationFile(basecit) BTW: 'make check' is a relativ long running task and if one changes a source file, all

We are running 4 Solaris10u7 DomUs on a b113 Dom0 I''d like to upgrade the Dom0 to b122 but not rebuild the DomUs. Below is a typical DomU xml dump. Is there anything obvious that will bite me in upgrading from 113 to 122? Thanks John virsh # dumpxml achilles2 <domain type=''xen'' id=''1''> <name>achilles2</name>

Hi, in preparation to try zfs boot on sparc I installed all recent patches incl. feature patches comming from s10s_u3wos_10 and after reboot finally 137137-09 (still having everything on UFS). Now it doesn''t boot at anymore: ############################### Sun Fire V240, No Keyboard Copyright 2006 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.22.23, 2048 MB memory installed,

I currently have 2 x ESXi boxes that have VMs stored on a NFS/iSCSI debian lenny linux box. I had purchased a new whitebox server as an intended replacement for the linux box. I had always planned on installing opensolaris on the new hardware with this config; 2 x 640GB mirrored rpool 6 x 1TB in raidz2 This box was going to be built in parallel with the current server and I would have simply

Hello, everybody. I apologize if this is obvious. I've not tried to make changes in R code within the R source itself before. I'm pursuing an experiment to make RPM files for R packages on-the-fly. Any time I install an R package successfully, I want to wrap up those files in an RPM. Basically, the idea is to "hack" an option similar to --build for R CMD INSTALL. I observe

Hello, I recently built a 64-bit R 2.10.1 on OpenSolaris using the Sun Studio 12.1 compilers. I would like to contribute the following notes, to update the OpenSolaris installation instructions. ================================================ 0. GNU libiconv and GNU gettext are assumed to be in /opt/lib. GNU libiconv is easy to build from source. After building it, configure

# uname -a Linux testbox 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux # rpm -qa|grep zfs zfs-test-0.5.2-1 zfs-modules-0.5.2-1_2.6.18_194.el5 zfs-0.5.2-1 zfs-modules-devel-0.5.2-1_2.6.18_194.el5 zfs-devel-0.5.2-1 # zfs list NAME USED AVAIL REFER MOUNTPOINT pool1 120K 228G 21K /pool1 pool1/fs1 21K 228G 21K /vik [root at

Hi all, I have 2 questions about ZFS. 1. I have create a snapshot in my pool1/data1, and zfs send/recv it to pool2/data2. but I found the USED in zfs list is different: NAME USED AVAIL REFER MOUNTPOINT pool2/data2 160G 1.44T 159G /pool2/data2 pool1/data 176G 638G 175G /pool1/data1 It keep about 30,000,000 files. The content of p_pool/p1 and backup/p_backup

Howdy All, I''ve a bit of a strange problem here. I have a filesystem with one snapshot that simply refuses to be destroyed. The snapshots just prior to it and just after it were destroyed without problem. While running the zfs destroy command on this particular snapshot, the server becomes more-or-less hung. It''s pingable but will not open a new shell (local or via ssh) however

I have just upgraded my jumpstart server to S10 u2 b9a. It is an Ultra 10 with two 120GB EIDE drives. The second drive (disk1) is new, and has u2b9a installed on a slice, with most of the space in slice 7 for the ZFS pool I created pool1 on disk1, and created the filesystem pool1/ro (for legacy reasons). I them moved my data from the original disk0 UFS file system to pool1/ro. Initially I

I figure this group will know better than any other I have contact with, is 700-800 I/Ops reasonable for a 7200 RPM SATA drive (1 TB Sun badged Seagate ST31000N in a J4400) ? I have a resilver running and am seeing about 700-800 writes/sec. on the hot spare as it resilvers. There is no other I/O activity on this box, as this is a remote replication target for production data. I have a the

I have two identical Supermicro boxes with 32GB ram. Hardware details at the end of the message. They were running OI 151.a.5 for months. The zpool configuration was one storage zpool with 3 vdevs of 8 disks in RAIDZ2. The OI installation is absolutely clean. Just next-next-next until done. All I do is configure the network after install. I don''t install or enable any other services.

hi there, I'm following these documentations to add a file-based disk volume to a KVM guest under Centos 6.0 : http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualization/chap-Virtualization-Storage_Volumes.html as instructed, I created a "pool" then a "volume", file-based, e.g : mkdir /mnt/raid/kvm_pool1 virsh # pool-define-as pool1 dir - - - -