similar to: Unable to boot Dom0 from external hard disk in snv_b81

Hello, I had snv_111b running for a while on a HP DL160G5. With two 16GB USB sticks comprising the mirrored rpool for boot. And four 1TB drives comprising another pool, pool1, for data. So that''s been working just fine for a few months. Yesterday I get it into my mind to upgrade the OS to latest, then was snv_127. That worked, and all was well. Also did an upgrade to the

Hello all, I am trying to set up my brother's UPS (remotely over internet) on an OpenIndiana-based storage box. According to him, the UPS is probably an Ippon Back Power Pro 600 dated around 2003 (battery recently replaced), and it has an USB connection. Sorry for a relatively long post with a log of my successes and failures, in the hopes that someone would point out what I did wrong.

This patch set is a follow up to "Add a vhost RPMsg API" [1], it is marked as an RFC because firstly it depends on the RPMsg API series and secondly it is currently being reviewed on ALSA and SOF mailing lists, but any early comments from virtualisation developers would be highly appreciated too! Thanks Guennadi [1]

This patch set is a follow up to "Add a vhost RPMsg API" [1], it is marked as an RFC because firstly it depends on the RPMsg API series and secondly it is currently being reviewed on ALSA and SOF mailing lists, but any early comments from virtualisation developers would be highly appreciated too! Thanks Guennadi [1]

I was just handed a 2nd monitor for my system at work, and using Centos 5 (latest) can't make dual head work. a good bit of googling isn't being particularly helpful either. It's a HP workstation xw4100, with Nvidia Quadro NVS280SD graphics card. Enabling dual head in the "display" app simply configures X so that it (i.e., X) won't start. I haven't found the x log

On Fri, 2015-07-03 at 22:10 -0700, ToddAndMargo wrote: > Did it work? Yes, this time around the install worked. Thing is, the sha1sum was the same as the first time I downloaded the ISO so there was no corruption to speak of. I really don't know why it wasn't working before. I haven't done much in the preview except try out Spartan and do some configuration. I like the UI design.

All, Our project has modified the kernel and while testing it with xen, specifically running virt-install to install a domain, the command hangs when the install kernel is booting: # virt-install What is the name of your virtual machine? dom1 How much RAM should be allocated (in megabytes)? 500 What would you like to use as the disk (path)? /export/home/dom1 How large would you like the disk

Hi All, over the last couple of weeks, I had to boot from my rpool from various physical machines because some component on my laptop mainboard blew up (you know that burned electronics smell?). I can''t retrospectively document all I did, but I am sure I recreated the boot-archive, ran devfsadm -C and deleted /etc/zfs/zpool.cache several times. Now zpool status is referring to a

On Sat, 2015-07-04 at 19:22 -0700, ToddAndMargo wrote: > I am glad it worked. > > Sounds to me like Windows being Windows. SOF (Son-of-Frankenstein > or Windows Nein, oops, Windows 10) is terrible quality. If it > works right in your other VM's, then it is SOF's doing. The newest update (10162) appears to have improved the weird mouse behaviour I was seeing. It's

On Wed, May 27, 2020 at 08:05:41PM +0200, Guennadi Liakhovetski wrote: > Linux supports running the RPMsg protocol over the VirtIO transport > protocol, but currently there is only support for VirtIO clients and > no support for a VirtIO server. This patch adds a vhost-based RPMsg > server implementation. This looks really useful, but why is it implemented as an API and not as a real

On Wed, May 27, 2020 at 08:05:41PM +0200, Guennadi Liakhovetski wrote: > Linux supports running the RPMsg protocol over the VirtIO transport > protocol, but currently there is only support for VirtIO clients and > no support for a VirtIO server. This patch adds a vhost-based RPMsg > server implementation. This looks really useful, but why is it implemented as an API and not as a real

checks IO error in ocfs2_get_sector(). this patch is based on 1.4 git. Signed-off-by: Wengang wang <wen.gang.wang at oracle.com> -- Index: fs/ocfs2/super.c =================================================================== --- fs/ocfs2/super.c (revision 128) +++ fs/ocfs2/super.c (working copy) @@ -1203,6 +1203,12 @@ static int ocfs2_get_sector(struct super unlock_buffer(*bh);

Hello, Can't get chan_gtalk.so module to load, neither res_jabber.so: Asterisk*CLI> module load chan_gtalk.so Unable to load module chan_gtalk.so Command 'module load chan_gtalk.so ' failed. [Dec 1 16:10:05] WARNING[2931]: loader.c:387 load_dynamic_module: Error loading module 'chan_gtalk.so': libiksemel.so.3: cannot open shared object file: No such file or directory [Dec

My interpretation of the relation between 1-way ANOVA and Wilcoxon's test (wilcox.test() in R) is the following. 1-way ANOVA is to test if two or multiple distributions are the same, assuming all the distributions are normal and have equal variances. Wilcoxon's test is to test two distributions are the same without assuming what their distributions are. In this sense, I'm wondering

netfilter and lartc members I just thought it''s time I contribute. I created this little script to help me while setting up iptables rules for firewalling, shaping or both. I hope this helps someone. Called tableview.sh, inspired by Table Mountain, Cape Town, ZA :) --- SOF ---- #!/bin/sh # ____ # /\/ \/\ # /__________\ # # Simple loop for keeping track of what is happening in

This has me baffled. I run Diablo 2 under Wine, works absolutely flawlessly in every way. I have DGA enabled, and a 800x600 desktop (also tried the Managed and Unmanaged options). Thing is, my X desktop is 1600x1200x16bpp and of course Diablo 2 is only 800x600. Is there any way to have this resolution automagically change to 800x600 (nothing seems to do that here), and back when I exit it? I

Hi there, I've successfully migrated an extremely large Samba3 domain to Samba4. The platforms involved: Samba files (/var/lib/samba) copied from a Debian 6-based Samba3 PDC with an LDAP backend Debian 7 with Samba4 installed from backports, with slapd installed locally (and now disabled). However, a number of things appear to be wrong: dpadmin at samba4-dev0:~$ host -t SRV

Dear all, I have used polr in MASS but I am uncertain about the summary(polr.object) interpretation and would be happy for help on that. This is my summary: > summary(shade.polr) Re-fitting to get Hessian Call: polr(formula = as.ordered(shade) ~ as.factor(objekt), data = sof, weights = as.numeric(frek)) Coefficients: Value Std. Error t value 2.1699520 0.3681840 5.8936612

Dear list, I have moved my HVMs from xen to kvm and it worked well except some problems using virsh. First, one OpenSolaris HVM does boot with warnings: WARNING: /pci at 0,0/pci1af4,1100 at 1,2 (uhci1): No SOF interrupts have been received, this USB UHCI host controller is unusable* *The corresponding process: /usr/bin/qemu-system-x86_64 -S -M pc-0.12 -enable-kvm -m 1024 -smp

Dear useRs is there any nonparametric test for the analysis of variance in a design with two within-factors (repeated measures on both factors)? Friedman is not appropriate here, therefore I am grateful for any alternative test. thanks for any hint cheers christoph --