similar to: bnx2 FTQ issues on 2.6.32 + xen 4.0.1;

Hi, I hope this is the correct mailinglist for my question. I've made a script that sends a file to a NT shared folder. As long as I make a successfull connect, I get return status 0... This is a problem, since now I can't make a correct errorhandling if something goes wrong. +/opt/samba-2.0.5a/bin/smbclient //mapa-lap/mapaPublic -E -d0 -I XXX.YYY.ZZZ.WWW -n mapa-lap -N -U guest -c put

Hi: I''ve met an ext4 Bug in dom0 kernel 2.6.32.36. (See kernel stack below) 32.36 kernel commit: http://git.kernel.org/?p=linux/kernel/git/jeremy/xen.git;a=commit;h=ae333e97552c81ab10395ad1ffc6d6daaadb144a The bug only show up in our cluster environments which includes 300 physical machines, one server will run into this bug per day. Running ontop of every server, there are about 30

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

Hello, I've got a very strange problem. Lately I've been setting up my linux servers for network (layer2) redundancy with a bridge interface containing two ethernet interfaces connecting to two switches. So far I didn't have any problems with it, but now a very strange thing happens with a new server I'm installing. The server is an ibm x346 having two onboard BCM5721 cards, the

Looks like the GSO is involved? I got this while running Dom0 only (no guests), with a BOINC/Rosetta@home application running on all 4 cores. changeset: 10649:8e55c5c11475 Build: x86_32p (pae). ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1133! invalid opcode: 0000 [#1] SMP CPU: 0 EIP: 0061:[<c04dceb0>] Not tainted VLI EFLAGS: 00210297 (2.6.16.13-xen

The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin at microsoft.com> ---

The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin at microsoft.com> ---

I just kickstarted a new machine with the latest CentOS 6.2 files, including kernel 2.6.32-220.13.1.el6.x86_64. It came up without network interfaces. dmesg says: bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.1 (Dec 18, 2011) alloc irq_desc for 36 on node -1 alloc kstat_irqs on node -1 bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 bnx2 0000:01:00.0:

Hi, i test a xen-patched kernel 2.6.31.10 (kernel from kernel.org with the suse patches) on a system with a boradcom net extreme II (5709) nic using the module bnx2. The nic does not run with this kernel. I get: bnx2 0000:01:00.0: map irq failed Any experiences? Best Regards - Michael Schmidt _______________________________________________ Xen-users mailing list

Hello list, I have two differents installation Xen Hypervisor on two identical physical server, on the same switch : The problem is on my new server (Xen 4.0.1 with pvops kernel 2.6.32.24), I have bad performance on bandwidth I have test with a files copy and "iperf". Result iperf average: Transfert Bandwidth XEN-A -> Windows

I have a broadcom bcm5722 and a dual intel pro/1000 pt nic in a dell t110. The setup sees the cards and i put them into automatic mode. After the install no cards are detected at all. Astaro 8.01 detects and utilizes all of these cards just fine. I have also tried ubuntu server 10.04 lts and they work fine. I'm curious if this is a bug with Centos 6?

Hi all, I have a problem when from domU I need to configure a network interface. My system configuration is the next: dom0: xen 3.4.3 with 2.6.18-238.9.1.el5xen kernel, making pci back from a network card. All ok. This is the result from "lspci -v -s 09:00.0" 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) Subsystem: Broadcom

Hoping someone else has seen this before. I have a few dozen Dell R610 systems with CentOS 5.2 that are using kernels from 5.3 and 5.4 (2.6.18-128.1.10.el5 & 2.6.18-164.6.1.el5), that at random lose layer 2 network connectivity either partially or totally. Running tcpdump on the interface reveals only ARP broadcasts, no responses. Switch reports no packets being received on the interface.

Hi all I'm trying to setup second ethernet on Dell 2950 server but there isn't any eth1 device (in the bios are ON) # dmesg |grep eth eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169, node addr 001c23d878bb eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 169, node addr 001c23d878bd

Hi there, I'm rying to 'turn' an Schunk in an .Rnw file(Xemacs-21.4.13, ESS-5.2.8, R-2.1, miktex-2.4.1705). Has anyone got the isorot package to work with Sweave? JC example test.Rnw: \documentclass[a4paper]{article} \usepackage{Sweave} \usepackage{isorot} \rotdriver{dvips} \clockwise \title{Sweave Example 1} \author{apologies to Friedrich Leisch } \begin{document} \maketitle

Getting "bnx2i: iSCSI not supported, dev=eth0" for all the NIC adapters on all of my R710's running CentOS 5.5. Here is an sample of the error messages: bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. bonding: bond0: setting mode to active-backup

I totally agree with Luc Boudreau about this problem. On modern branded server they ALL use Broadcom chipset... I must admit that: a) lot of people are experiencing the problem but can tolerate it or b) someone already experienced this problem and solved it Lets'' approach the problem pragmatically... just start with a survey on the list. ... hope we solve this issue soon. Ivan

Hey R users, suppose we have data: [1] 2010.12.26 00:00:52 688,88 11,69 43,00 [2] 11,69 43,00 [3] 11,69 43,00 [4] 11,69 43,00 [5] 11,69 43,00 [6] 11,69 43,00 [7] 11,69 43,00 [8] 11,69 43,00 [9] 11,69 43,00 [10] 11,69 43,00 [11] 11,69 43,00 [12] 11,69 43,00 [13] 11,69 43,00 [14] 11,69 43,00 [15] 11,69

Hello, I''ve this strange problem. When Xen kernel start and it try to start eth devices, network doesn''t work. It seems to be a problem with NICs firmware. Anyone had this problem? Do you know where I can download firmware upgrade? (on DELL''s site I''ve just searched...) Thanks, Carlo No virus found in this outgoing message. Checked by AVG Free Edition.

I''m experimenting with xen + iscsi, and I founded that under heavy stress domU''s can crash entire system, I''ve reproduced this many many times. My system is like this Software: - iSCSI Enterprise Target v0.4.13 - RedHat AS4 update 4 64bit + Xen 3.0.3-0 Kernel 2.6.16.29 + Open iSCSI v2.0.730 (Initiator) - Bonnie++ v1.03a VM: - Debian 3.1r3 + Open iSCSI v2.0.730