similar to: unpredictable Xen crash w NetBSD 5.0.2(XEN3PAE_DOMU)

I understand that all work is going into xen3, but I had wanted to note that aoe (drivers/block/aoe) is giving me trouble on xen 2.0.6 (so we can keep and eye on xen3). Specifically I can''t see nor export AOE devices. As a quick background on AOE, it is not IP (not routable, etc), but works with broadcasts and packets to MAC addresses (see http://www.coraid.com). (for anyone who

Hi, I'm pretty new to ocfs2 and a bit stuck. I have two Debian/Squeeze (testing) machines accessing an ocfs2 filesystem over aoe. The filesystem sits on an lvm2 volume, but I guess that is irrelevant. Even when mostly idle, everything accessing the cluster sometimes hangs for about 20 seconds. This happens rather frequently, say every 5 minutes, but the interval seems irregular while the

Guys, I have setup my hard disc with 3 partitions: 1- 256MB on /boot; 2- 2GB on / for my dom0 (Debian 5.0) (eth0 default bridge for guests LAN); 3- 498GB exported with vblade-persist to my network (eth1 for the AoE protocol). On dom0 hypervisor01: vblade-persist setup 0 0 eth1 /dev/sda3 vblade-persist start all How to create a CVLM VG with /dev/etherd/e0.0 on each of my dom0s? Including the

I''ve installed debian lenny amd64, it is frozen now. I''ve install kernel for xen support but it doesn''t start. It says "you need to load kernel first" but I''ve installed all the packages concerning xen, also packages related to the kernel. Perhaps lenny doesn''t support xen anymore? Any solution?

I have a Fedora Core server running: Fedora Core release 4 (Stentz) kernel version: 2.6.15-1.1833_FC4smp ( I have also tried kernel version: 2.6.16-1.2108_FC4smp) I compiled the ocfs2 and ocfs2-tools using the following steps: # MODULES: tar zxvpf ocfs2-1.2.1.tar.gz cd ocfs2-1.2.1 ./configure make make install # TOOLS: tar zxf ocfs2-tools-1.2.1.tar.gz cd ocfs2-tools-1.2.1 ./configure

hello ! i try to use a network technology on one single host, which wasn`t designed for that. to give a short overview of what i`m talking about: AoE is just like a "networked blockdevice" (just like nbd/enbd) - but without tcp/ip. AoE kernel driver is the "client end" (see this like an iSCSI initiator) - and an etherblade storage appliance is the "server end"

Hi! dovecot-2.2.13 already has quota support for NetBSD, but it's buggy. The attached patches by Manuel Bouyer <bouyer at NetBSD.org> fix the issues. There is one thing that's not nice in them: one include is now for "/usr/include/quota.h" since dovecot comes with its own file "quota.h" which is earlier in the search path. Perhaps dovecot's copy can be

I am using R for a graduate class on linear models that I teach. I sent the class a sample transcript of explicit construction of the model matrix and use of the QR decomposition. One of the members of the class picked up on the fact that the model matrix was not what I advertised that it should be when a two-sided formula is used. A one-sided formula works properly. For example, >

I ran into an interesting/strange issue today. I still don''t understand what happened, but in know what fixed it. I had a situation where I could only see vblade exported devices from OFF the physical machine. It seemed that if the packets went through two ports of the bridge (instead of one port and the real interface) they got "lost". I sniffed around and failed to

I have an OCFS2 filesystem on a coraid AOE device. It mounts fine, but with heavy I/O the server self fences claiming a write timeout: (16,2):o2hb_write_timeout:164 ERROR: Heartbeat write timeout to device etherd/e0.1p1 after 12000 milliseconds (16,2):o2hb_stop_all_regions:1789 ERROR: stopping heartbeat on all active regions. Kernel panic - not syncing: ocfs2 is very sorry to be fencing this

Implement pci passthrough for HVM guests for NetBSD Dom0. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> From: Manuel Bouyer <bouyer@netbsd.org> -- ---to satisfy European Law for business letters: Advanced Micro Devices GmbH Einsteinring 24, 85689 Dornach b. Muenchen Geschaeftsfuehrer: Alberto Bozzo, Andrew Bowd Sitz: Dornach, Gemeinde Aschheim, Landkreis Muenchen

Hi people. Im new on Xen and I''m looking in how to do a physical migration on Xen. I know that there is a lot of choices (that is the first problem) My environment is simple: 2 physical servers, each one running one instance of XEN. Each host has 2 gigabit cards. One to talk with the world, other to talk between theirselves. I want to run the every vm on the both hosts, if one fail

I am trying to mount the same partition from a KVM ubuntu 8.04.1 virtual machine and on an ubuntu 8.04.1 host server. I am able to mount the partition just on fine on two ubuntu host servers, they both talk to each other. The logs on both servers show the other machine mounting and unmounting the drive. However, when I mount the drive in the KVM VM I get no communication to the host

Hi people... Here we use Xen 4 with Debian Lenny... We''re using kernel 2.6.31.13 pvops... As a storage system, we use AoE devices... So, we installed VM''s on AoE partition... The "NAS" server is a Intel based baremetal with SATA hard disc... However, sometime I feeling that VM''s is so slow... Also, all VM has GPLPV drivers installed... So, I am thing about

I need to setup a 3.27TB ext3 filesystem using -i 1024 and -b 1024. When I try to format this partition I get the "Filesystem too large." error. Are there any plans to update these limits? are there any patches already available that I can try out? Or am I just SOL here? (vzbu2 ~)# fdisk -l /dev/etherd/e1.1 Disk /dev/etherd/e1.1: 3600.7 GB, 3600795892224 bytes 255 heads, 63

We recently added a disk to our Coraid SAN. We''ve used tons of devices off of this SAN with Xen before, but this time we experienced some weird behavior. I configured a DomU to have the device directly offered as a disk (i.e. ''phy/dev/etherd/e1.1,sdb1,rw''). When I tried to boot it, an xvd process showed up as usual. However, it consumed 100% processor

Hi I install CentOS 5.4 and try to use Xen.... But when I deploy some VM with Virt-manager and specify 2 or more VCPUS to use, when start the vm it start with just one CPU... On this VM I install Windows 2003 Server... This the file of VM: name = "Avision" uuid = "625139bf-1ad3-86fc-45e6-e8efbb9db643" maxmem = 2048 memory = 2048 vcpus = 4 cpus = "0,1,2,3" builder =

Hello: Has anyone on this list had to configure hairpinning on a Cisco gateway running IOS 12.2 or 12.3 and using a PRI for connectivity to the PSTN? If so could you tell me how it is done? I'm told this is the source of my call transfer problems and yet I cannot find clear instructions for how the configuration is done. Thanks,Steve -- ISC Network Engineering The University of

Hello, I have encountered a crash in dom0 kernel while booting a domU from an AOE device. I haven''t seen such crashes when booting from local partitions/ LVM volumes/ loopback file systems. Also I haven''t seen such crash when I did repetitive I/O to these AOE devices. As the call trace of crash indicates the crash is in xenolinux kernel. Also this crash is predictably

Hi, We are planning to have LVM being used over a network of 3 h/w machines(500 GB Disk each) Each hardware machine will have 2-3 domUs. Can we store these domUs as a Logical Volumes stored across Network of these 3 machines? Can one DomU exceed the 500 GB (physical drive size) and store say 1 TB of data across the networked Physical Volumes? Has anyone done this before? Thanks and regards,