similar to: Problems with power management xen 3.4

Hello, I have been working sometime now on getting a HVM accepting a PCI card from the host. As was said in the VT-D wiki I bought an ASUS P5E VM DO motherboard (rel 0803) which has the VT-D option in the bios. I want to pass a Hauppauge PVR 500 card to a virtual machine running LinuxMCE. After first trying XEN 3.2.1 which did not enable the "VT-D virtualisation" bit in xm dmesg, i

I obtain this error when booting (xen/stable-2.6.31.x|xen/master) on Xen 3.4.2 x86_64 xen_major : 3 xen_minor : 4 xen_extra : .2 I had no errors with the same kernel, version of the day 2010-03-03 To compile the kernel i use this configuration " http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.31.6-pvops-dom0-xen-master-x86_64 "

Hi I am trying to install Windows using HVM but I get an error message that is totally useless and I am unable to figure out what the problem is. I just pulled xen-unstable.hg because nothing else supports my CPU yet. So here is what I get when I simply try to create the domain: [2008-05-28 13:55:26 16515] DEBUG (__init_s:1072) XendDomainInfo.create([''vm'',

Hi Team, For a XenServer (5.6 sp2) crash I have got following in the crash logs. Can somebody tell me why I can see(grant_table.c:1408:d0 dest domain 40 dying) this and how I can resolve it, if it is an issue. (XEN) *** Serial input -> Xen (type ''CTRL-a'' three times to switch input to DOM0) (XEN) Freed 128kB init memory. (XEN) __csched_vcpu_acct_start: setting dom 0

Hi, I did a git pull on pv_ops tree this morning and now get a crash when eth0 is started, here is the full boot log: Booting ''Xen 3.4 / Linux 2.6.29-rc6-tip'' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen.gz com1=115200,8n1 console=com1,vga iommu=1 [Multiboot-elf, <0x100000:0x131748:0x8e8b8>, shtab=0x2c0078, entry=0x100000] module

My kernel crashes every time I shut down dom0 This crash was not happening before I installed the Xen hypervisor Any ideas? (XEN) Xen version 3.2-1 (Debian 3.2.1-2) (waldi at debian.org) (gcc version 4.3.1 (Debian 4.3.1-2) ) Sat Jun 28 09:32:18 UTC 2008 (XEN) Command line: com1=9600,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods:

I do not seem to be able to get any where with the power management functions. I have had a look at the xenpm Wiki page, but it hasn''t helped. Its probably something completely obvious, but I can''t see it. I running Xen 3.4.0 on Centos 5.3 x86_64 using the gitco RPMs on an Intel S5000PSL motherboard with 2 x Xeon 5410s. Dom0 is running the latest Centos 5.3 kernel. My xm

Hi all, I have searched the net and haven''t found a good answer so I hope perhaps someone here can help. I have an IBM x3850 (8863) that I am upgrading from SLES11SP1 to SLES11SP2, and at the same time XEN is being upgraded as part of the distro. The server is used as a Xen host for up to 6 guests. Anyway, the server boots fine with the SLES11SP2 default kernel, and the trace

I am trying to get a pv_ops dom0 working for testing, but I am running into an elf_init error: (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_init: not an ELF binary Full output attached. >From what I have read on the mailing lists, it seems that it is usually a problem with either grub or a corrupt dom0 kernel. Attached is my kernel config (2.6.28-rc6-tip). I followed the instructions on:

Hi all, I''ve successfully installed xen3.3.0 on Linux ubuntu 2.6.27.5 #1 SMP i686 GNU/Linux. I built xen with the requisite XSM_ENABLE=y, ACM_SECURITY=y and believe I have the correct config parameters in the 2.6.27.5 kernel. Boot goes smoothly, set to automatically create 2 domUs. All appears okay with XSM/ACM... root@ubuntu:~# xm dmesg | grep -i xsm (XEN) XSM Framework v1.0.0

Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64 Version: 3.4.3-1 and 2.6.32-15 Hello all, GRUB-PC does not automatically populate Xen related parameters in /boot/grub/grub.cfg so I added them manually (see below). All the packages involved on my Dell PowerEdge R710 running Debian GNU/Linux Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB SATA HDD

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I followed the instructions here: http://nixcraft.com/file-servers/14803-how-centos-5-pxe-linux-installation-server.html, along with a few other sources that were less successful, and I finally got a pxe boot going. I'm using CentOS 5.3 x86_64 media as the source. The server boots, but keeps hanging. Here is my boot line:

I tried for a couple of times to add an information that might help you with regard to Bug #603713 by sending mailto "603713 at bugs.debian.org" But it never appeared there - so I try to let you know how to work around that bug this way. If you decide not to take this mail into account I won't bother you any more Regards Andreas -----Urspr?ngliche Nachricht----- Von: Balg, Andreas

This patch supports basic gfx passthrough on QEMU: - disable emulated VGA adpater if there is passthroughed gfx - register/unregister legacy VGA I/O ports and MMIOs for passthroughed gfx Signed-off-by: Ben Lin <ben.y.lin@intel.com> Signed-off-by: Weidong Han <weidong.han@intel.com> _______________________________________________ Xen-devel mailing list

when I run dmesg PE2950 Dell Server I see the following line Linux version 2.6.18-92.1.6.el5 (mockbuild at builder15.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Wed J un 25 13:45:47 EDT 2008 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 -

Hi everyone, I am very excited to see that dom0 pvops is finally coming close to working, so I wanted to give it a try. >From the description it was not clear to me which kernel to chose as base for the patches.hg, so I took the latest (that was ~ 2 weeks ago) kernel on git.kernel.org I could find (post-2.6.28 git tip at that point). I managed to more or less apply all of the patches in the

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-1 Severity: important The amd64 Dom0 crashes in early boot-stage. For debugging purpose I logged Kernel-Dump with minicom over Serial Console: System is: Dell Poweredge R710 2x Intel XEON X5650 96GB RAM Perc H200 SAS Controller 3x SAS-Drive I see a possible conjunction with Bug #600241 but acpi=off doesn't solve this problem. Regards,

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-1 Severity: normal My 32Bit Dom0-crashes with error "Out of SW-IOMMU space for 65536 bytes" after doing moderate I/O on the local storage, which is a software-raid1 over 3 harddrives, connected to the builtin Perc H200 controller with ext3-fs. The error is reproduceable with "dd if=/dev/zero of=bigfile bs=1024 count=1000000"

Not sure if this is a Fedora Core 6 issue. I already post a message on their list but didn''t get an answer. So I am going to try here.. Does anyone has Windows Guest OS running successfully with the Dom0 has all the physical memory allocated? If I don''t lower the memory assign to Dom0 through grub, I will not be able to run a Windows Guest OS. This what I got Using

This fixes a bug in changeset 22526:7a5ee3800417, where the wrong value is read when deciding whether to flush the VTd tables. The effect is minor: in situations where the p2m entry is changed but the mfn is the same, the VTd tables will be unnecessarily flushed. old_entry is left untouched in the second case, since having a present old_entry will cause the an unnecessary check to be taken at