similar to: [PATCH 4/4] X86 microcode: add S3 micorcode update

From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Hi all, This series adds a new microcode driver for Xen. The Xen hypervisor can deal with all the low-level details of doing a microcode update (Intel vs AMD, doing all the physical CPUs present on the system, current and future, etc), so all the driver has to do is make a hypercall to upload the microcode into Xen. This only

Hi! From other people posting to this list, I know that there has been a bug related to the issue described in Xen Security Advisory 36 that disables iommu for some AMD users like me. However, even when passing "iommu=no-amd-iommu-perdev-intremap" it still disables i/o virtualisatoin. Related Xen dmesg output: (XEN) IVHD Error: Invalid IO-APIC 0 (XEN) AMD-Vi: Error initialization

A bug was recently posted to the R bug database (which probably would better have been posted as a query here) as to why this happens: > print(7.921,digits=2) [1] 8 > print(7.92,digits=2) [1] 7.9 Two things I *haven't* done to help make sense of this for myself are (1) writing out the binary representations to see if something obvious pops out about why this would be a breakpoint and

A bug was recently posted to the R bug database (which probably would better have been posted as a query here) as to why this happens: > print(7.921,digits=2) [1] 8 > print(7.92,digits=2) [1] 7.9 Two things I *haven't* done to help make sense of this for myself are (1) writing out the binary representations to see if something obvious pops out about why this would be a breakpoint and

On Thu, 6 Feb 2020 at 12:46, Phil Pennock <phil.pennock at globnix.org> wrote: [...] > ssh_config(5) describes for `HostKeyAlgorithms` that: > } The list of available key types may also be obtained using "ssh -Q key" > > Running `ssh -Q key`, the output does not include these proposed > replacements. > > Only in sshd_config(5): > rsa-sha2-512-cert-v01 at

On 2020-02-06 at 13:28 +1100, Darren Tucker wrote: > Like this. > --- a/sshd_config.5 > +++ b/sshd_config.5 The ssh_config.5 also has a copy of this and presumably needs the same change, unless I've misunderstood. -Phil

list(...), I am looking for a way to interrupt R from a callback: specifically, to interrupt plotting (typically on a cairoDevice, but would be good if it worked with other devices too). Of course, one can interrupt R nicely from the console with Ctrl-C (or Esc in Rgui), but I need to do it from a GUI. Callbacks run in a new thread, so obviously stop() etc will not work. I tried to look into how

Hi, trying to build klibc 1.1.8 on x86 fails on my machine as follows: KLIBCCC dash/trap.o KLIBCCC dash/output.o dash/trap.c: In function 'trapcmd': dash/trap.c:94: warning: unused parameter 'argc' dash/trap.c:94: warning: unused parameter 'argv' dash/trap.c: In function 'decode_signal': dash/trap.c:398: error: 'SIGRTMIN' undeclared (first use in this

The last (only?) caller of guestfs_int_cmd_clear_close_files() disappeared in commit e4c396888056 ("lib/info: Remove /dev/fd hacking and pass a true filename to qemu-img info.", 2018-01-23), part of v1.37.36. Simplify the code by removing guestfs_int_cmd_clear_close_files(). Signed-off-by: Laszlo Ersek <lersek at redhat.com> --- lib/guestfs-internal.h | 1 - lib/command.c

Hey I wanted to try my hand at doing some GPU passthrough so on my ASUS M5A97 which in the pass worked with an older BIOS (but said BIOS had issues after S3 suspend) - but with a BIOS the PCI passthrough does not work. That is due to:: (XEN) IVHD Error: Invalid IO-APIC 0xff (XEN) AMD-Vi: Error initialization

Hello all. I''ve recently installed the 0.2.2 pre-release of mongrel_cluster to try out the new --clean option. However, after installing, when I give a simple "mongrel_rails" command, the cluster::status command is not listed. The error I receive when I do try and run the full "mongrel_rails cluster::status" is... ERROR RUNNING

v1 was here: https://www.redhat.com/archives/libguestfs/2013-August/msg00005.html This now works, to some extent. The main problem now is that devices are named /dev/ubd[a-] which of course confuses everything. I'm thinking it may be easier to add a udev rule to rename them. Rich.

This is a User-Mode Linux backend for libguestfs. You can select it by doing: export LIBGUESTFS_BACKEND=uml export LIBGUESTFS_QEMU=/path/to/vmlinux Note we're reusing the 'qemu' variable in the handle for convenience. QEmu is not involved when using the UML backend. This almost works. UML itself crashes when the daemon tries to connect to the serial port. I suspect it's

This set of patches converts the way frames gets created from using PUSHes/POPs to using MOVes, thus allowing (in certain cases) to avoid saving/restoring part of the register set. While the place where the (small) win from this comes from varies between CPUs, the net effect is a 1 to 2% reduction on a combined interruption entry and exit when the full state save can be avoided. 1: use MOV

Inspired by libvirt's virCommand* internal mini-library, this adds some internal APIs for running commands. The first patch contains the new APIs. The subsequent patches change various parts of the library over to use it. Rich.

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-3+deb7u1 Severity: normal Hello, I was running Xen for a few years and after a PSU failure I never got the system working stable again. I suspected damage to the board so I replaced everything in the system piece by piece but Xen enabled kernel always crashes even with only Dom0 running when moderate amount of IO happens on the box. kvm seems

Hi all, this patch series makes the necessary changes to make sure that the current ARM hypercall ABI can be used as-is on 64 bit ARM platforms: - it defines xen_ulong_t as uint64_t on ARM; - it introduces a new macro to handle guest pointers, called XEN_GUEST_HANDLE_PARAM (that has size 4 bytes on aarch and is going to have size 8 bytes on aarch64); - it replaces all the occurrences of

Hi, as it was already discussed on this list, here it is my attempt in splitting virt-p2v in an own repository. Sadly there are things that must be copied from libguestfs, as it cannot be avoided. The approach taken was to run a script (will send separately) to just get the "p2v" subdirectory with its history as own repository, and then add in few followup commits all the bits needed

I have updated the klibc patchset based on feedback received. In particular, the patchset has been reorganized so as not to break git-bisect. Additionally, this updates the patch base to 2.6.17-git12 (d38b69689c349f35502b92e20dafb30c62d49d63) and klibc 1.4.8; the main difference on the klibc side is removal of obsolete code. This is also available as a git tree at:

Hi all, this patch series makes the necessary changes to make sure that the current ARM hypercall ABI can be used as-is on 64 bit ARM platforms: - it defines xen_ulong_t as uint64_t on ARM; - it introduces a new macro to handle guest pointers, called XEN_GUEST_HANDLE_PARAM (that has size 4 bytes on aarch and is going to have size 8 bytes on aarch64); - it replaces all the occurrences of