Displaying 20 results from an estimated 2000 matches similar to: "pv_ops dom0 testing"
2009 Mar 04
1
pv_ops kernel 2.6.29-rc6 boot failure
Hi,
I did a git pull on pv_ops tree this morning and now get a crash when
eth0 is started, here is the full boot log:
Booting ''Xen 3.4 / Linux 2.6.29-rc6-tip''
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /xen.gz com1=115200,8n1 console=com1,vga iommu=1
[Multiboot-elf, <0x100000:0x131748:0x8e8b8>, shtab=0x2c0078, entry=0x100000]
module
2009 Jul 26
2
SATA DVD Burner / AHCI / CentOS 4.7 (kernel: 2.6.9-78.0.22.EL)
OK, it seems that the kernel I have (stock CentOS 4.7: 2.6.9-78.0.22.EL i686)
seems to gronk the nVideo SATA controller in AHCI mode. It is NOT able
to deal with the SATA DVD Burner I have. It is a "Sony Optiarc DVD
Burner with LightScribe Black SATA Model AD-7241S-0B LightScribe
Support". Is there some special magic I need to do? Here is the
relevant bit from the boot up (SATA ports
2009 Feb 27
8
Kernel build failure
Did a ''git pull'' a few minutes ago and tried to rebuild my kernel and
was given this error:
make
CHK include/linux/version.h
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-x86
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
CC drivers/acpi/acpica/hwsleep.o
drivers/acpi/acpica/hwsleep.c: In function
2019 Jun 24
2
Issue with dvd/cdrom drive
>
> >
> > [root at darkness ~]# ls -al /dev/sr*
> > ls: cannot access /dev/sr*: No such file or directory
> > [root at darkness ~]# ls /dev/s*
> > /dev/sda /dev/sda3 /dev/sdb1 /dev/sg0 /dev/stderr
> > /dev/sda1 /dev/sda4 /dev/sdb2 /dev/sg1 /dev/stdin
> > /dev/sda2 /dev/sdb /dev/sdb3 /dev/snapshot /dev/stdout
> > [root at
2019 Jun 24
2
Issue with dvd/cdrom drive
On Mon, Jun 24, 2019 at 3:35 AM Pete Biggs <pete at biggs.org.uk> wrote:
> On Sun, 2019-06-23 at 22:13 -0400, doug schmidt wrote:
> > Hi,
> > I'm having an issue with my Thinkpad P70 laptop/workstation. This system
> is
> > a dual boot,
> > windows 10 pro and centos 7. I have not needed to use the cdrom until
> now,
> > however the system does not
2010 Apr 11
7
dom0 crash, require assistance interpretting logs and config suggestions
Hello,
I have experienced a dom0 crash where the system became unreachable via
the network and the console was unresponsive. I would appreciate help
interpretting the logs and any configuration change suggestions.
It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel
2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is
running 4 VMs. One VM has two PCI NICs being
2010 Apr 07
15
XEN 4.0 boot error
Hey all,
Just downloaded the new Xen 4.0 and ran
Make xen
Make tools
Make stubdom
Copied the new files from dist/install
Im already running pv_ops 2.6.31.6 kernel.
When I boot i get
(XEN) Panic on CPU 0:
(XEN) IO-APIC + timer doesn''t work!
I have tried booting with noapic boot option but makes no difference.
The system worked fine on 3.4.2
CPU is AMD.
2010 Jul 07
2
Bug#588310: Xen enabled kernel cannot find the / partition
Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64
Version: 3.4.3-1 and 2.6.32-15
Hello all,
GRUB-PC does not automatically populate Xen related parameters in
/boot/grub/grub.cfg so I added them manually (see below). All the
packages involved on my Dell PowerEdge R710 running Debian GNU/Linux
Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB
SATA HDD
2019 Feb 19
2
[Bug 109681] New: Nvidia GT710 => nouveau + wayland + swayWM => crash when use acceleration (open Firefox)
https://bugs.freedesktop.org/show_bug.cgi?id=109681
Bug ID: 109681
Summary: Nvidia GT710 => nouveau + wayland + swayWM => crash
when use acceleration (open Firefox)
Product: Mesa
Version: 18.3
Hardware: x86-64 (AMD64)
OS: Linux (All)
Status: NEW
Severity: critical
2007 Apr 30
3
Slow performance
Hi folks.
I'm posting this to both the Fedora as well as the CentOS lists in
hopes that somewhere, someone can help me figure out what's going on. I
have a dual Xeon 3GHz server that's performing rather slow when it comes
to disk activities.
The machine is configured with a single 160 GiB OS drive (with
CentOS 5.0) and 4x500 GiB drives setup in a RAID-5 configuration.
2014 Oct 25
4
linux kernel 3.17, freeze on resume
This may not be the proper place to raise this question but I've had little luck elsewhere.
After trying again, unsuccessfully this time, to install the proprietary NVIDIA driver, I've decided to focus my efforts on the open source Nouveau driver. I've seen video drivers blamed for varying degrees of "freeze on resume" but I'm not certain that's what I'm up
2010 Aug 21
24
Freeze with 2.6.32.19 and xen-4.0.1rc5
Hi,
i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
with xen-4.0.1rc5. Due some reason the system freezes from time to time.
I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn''t write
anything to serial console so there are no errors or something like that.
Perhaps there is something to see from the logs ...
Hardware
Board: Intel DQ45CB
CPU:
2014 Mar 13
2
nouveau_fan_update: possible circular locking dependency detected
On Sun, Mar 9, 2014 at 10:51 AM, Marcin Slusarz
<marcin.slusarz at gmail.com> wrote:
> [ 326.168487] ======================================================
> [ 326.168491] [ INFO: possible circular locking dependency detected ]
> [ 326.168496] 3.13.6 #1270 Not tainted
> [ 326.168500] -------------------------------------------------------
> [ 326.168504] ldconfig/22297 is
2016 Jul 05
2
Help with nouveau driver
Hi, I am having problems with the nouveau driver from Debian.
Can I get help here?
Cheers
2007 May 04
1
CentOS 5 + Nforce 4 SLI Intel SATA problems
I've been having an extremely hard time using the on board SATA
controller on my nvidia based board. I have two 160gig Maxtor SATA
drives attached to the on board controller, setup as software raid0. The
problem is the array is extremely unreliable, where I'm getting constant
I/O errors like:
sd 0:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sda, sector
2012 Dec 09
2
Problem with secondary sata controller
I am having problems getting my 64-bit Debian Squeeze (Xen version 4.0, Linux Kernel 2.6.32) dom0 to recognize a harddrive connected to a secondary sata controller. My motherboard is a Gigabyte GA-X79-UP4 and has two sata controllers. The first is controlled by an Intel X79 chipset and the second is controlled by a Marvell 88SE9172 chip. During the initial install of Debian everything is fine and
2011 Apr 14
3
Debian Squeeze hangs with kernel 2.6.32-5-xen-686
Hi all!
After upgrading to Squeeze, I am watching a Xen VMHost that after a
while it hangs. This did not happen when I was using Xen with Debian
Lenny (in this case as with Squeeze, the Xen components are from Debian
repositories).
In each case I connected a keyboard and monitor to the computer and the
screen remained black without answering any key.
This problem seems to also affect domUs,
2014 May 15
5
Bug#748052: Bug#748052: Bug#748052: Bug#748052: xen-hypervisor-4.3-amd64: No USB keyboard af
On Thu, 2014-05-15 at 11:01 +0100, Ian Campbell wrote:
> Please can you also post Xen's own dmesg (from "xl dmesg").
Please boot with loglvl=all on the hypervisor command line for this too.
Ian.
2013 Mar 05
8
eDP screen corruption using linux 3.8 & xen 4.2
Konrad, et al,
I am seeing visual corruption (almost like an interlacing problem) with
i915 under Xen on some platforms using linux-3.8.
See attached file for an example of the visual corruption.
This particular platform is an HP Elitebook 2540p
The same kernel and ramdisk, when booted as native linux does not show this
corruption.
dmesg is attached, as well (out.txt) - but I did not see
2013 Jul 22
7
[Bug 67161] New: Blank video after resuming from S3 or S4
https://bugs.freedesktop.org/show_bug.cgi?id=67161
Priority: medium
Bug ID: 67161
Assignee: nouveau at lists.freedesktop.org
Summary: Blank video after resuming from S3 or S4
QA Contact: xorg-team at lists.x.org
Severity: normal
Classification: Unclassified
OS: Linux (All)
Reporter: mauromol at tiscali.it