similar to: [PATCH 0/4] [AMD IOMMU] Enable PCI passthru for HVM guest

Hi! I am experiencing strange behavior with my new CentOS 6.3 installation (system up to date). I have a big 11 TB EXT4 array mounted on /home/data. The server is a Tyan 2U (TA26-B3992-E) with Dual Opteron 2216, one cpu has 4 Gigs RAM and the other has 8 Gigs (so 12 Gigs total). The server uses 8 x Seagate 2TB SAS hard disks (7200 RPM) and all the disks are grouped together to form 1

Hello, I have experienced a dom0 crash where the system became unreachable via the network and the console was unresponsive. I would appreciate help interpretting the logs and any configuration change suggestions. It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel 2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is running 4 VMs. One VM has two PCI NICs being

I''ve been trying to install a 2.6.37-12 kernel from kernel-ppa on one of my Ubuntu machines without success. It keeps giving errors like this: [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 frozen [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED [ 9.115556] ata9.00: cmd 60/04:00: d4:82:85/00:00:1f:00:00/40 tag 0 ncq 2048 in [ 9.115557]

Assuming I have a firewire card with a supported chipset, is there anything special I need to do in order for the kernel to recognize the card? Shouldn't kudzu "wake up" and configure the card when I boot up after installing it? This is a brand spanking new 4.4 system and a supported Agere chipset firewire card. I'm having trouble tickling devices connected to the card.

Hello, I have this problem - I have installation of Xen and Centos 5 (all RPMs are from Centos repositories). I have several DomU virtual machines running on this machine. When I try to copy some bigger amount of data from another physical computer to Dom0/DomU on this machine, the network freezes. The link is still up, I can see that the connection really links on the switch, but nothing is

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: Unknown device

Hey hope this opne is a "make senser". Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel support with no success, just a kernel oops and constant reboots. I followed Fedora''s wiki on building a custom kernel, even used F16''s .config which also was a

Hey hope this opne is a "make senser". Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel support with no success, just a kernel oops and constant reboots. I followed Fedora''s wiki on building a custom kernel, even used F16''s .config which also was a

I'm putting together a spec for a big(ger) memory x86_64 host, and I hope some of you-all can help. I'm looking for success stories of hardware that folks are using in production environments, preferably with CentOS 4, with more than 4GB of memory per CPU. I know there are lots of mobos out there that can do this, but I'm looking for what folks really have running. Call me

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

Thanks Anna, this was also quite interesting for me. Did you mean that I just have to eliminate the else branch or raise arround "All devices behind the uppermost PCI/PCI-X bridge must be co-assigned to the same guest." or do I have to eliminate more in order to prevent an FLR (whatever that is). For my board it''s definitely necessary to move PCI devices in different guests,

I am trying to get esata working. my lspci is below. When I plug in the disk an turn it on - dmesg reports nothing. Is it supposed to report anything like a usb disk does? Is there a module to load? My motherboard is GA-MA78GM-US2H. Jerry --------- 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge

In this thread: http://syslinux.zytor.com/archives/2007-February/008014.html I reported that IBM Opteron servers with Broadcom BCM5780 chipsets would freeze randomly in the PXE menus from the SYSLINUX 3.35 tools vesamenu.c32 and menu.c32. There did not seem to be any reason for this nor systematics in when the servers would lock up. The solution is now available: Upgrade your IBM servers to

http://bugs.freedesktop.org/show_bug.cgi?id=23822 Summary: Blank Screen during nouveau/xen boot Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy:

We're using PXELINUX for bootstrapping the network install our Linux cluster nodes. We just got some new IBM 326m dual-Opteron servers with Broadcom NetXtreme BCM5780 dual-Gigabit Ethernet ports. These dual-Ethernet servers work in an annoying way with PXELINUX when we configure for booting from the local hard disk as the PXE-client downloads this file from the DHCP/TFTP server: label

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

Hi all, I have a machine that won't boot syslinux 4.02 but will boot syslinux 3.53. We've installed syslinux 4.02 on a number of machines but only this one has a problem. The problem is that the machine hangs entirely after printing "boot:" on the tty. The stanza being booted in /boot/extlinux.conf is: label xe # XenServer kernel mboot.c32 append /boot/xen.gz

Anyone using boards with this chipset? I've gotten some dual core single cpu boxes along with the physical dual cpu boxes I just received and they're using the Serverworks HT1000 (Broadcom 5785) chipset. My CentOS 4.2 DVD doesn't want to recognize the chipset so I can't see any of the SATA drives in the integrated SATA ports. Drives on 3Ware cards work as expected, but I

Hi, Sorry i left the file behind. Here's the file. Best regards. On Sat, Nov 23, 2019, 16:50 Phil Perry <pperry at elrepo.org> wrote: > On 23/11/2019 06:48, Ebed wrote: > > Hi, > > > > Yesterday i tried to install centOS 8 on my little router and server, but > > there's no ethernet listed there. I'm using Compaq pressario V3737TU > which >