similar to: can xen-3.0.2 run in fedora core 3?

All, I am running xen3.0.2 on CentOS4.2, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! >Then system reboot.In grub.conf,I have changed

Hi all, I have a Opteron-machine with the MPT SCSI-controller (Symbios 53c1030). At least in i386-mode, mkinitrd does not seem to build a usable initrd for 2.6.13.x (.3 tested) with this kernel. With 2.6.12.6 it works fine. I have not tested this in x86_64 -mode yet. The symptom is that mptbase and mptscsih load, but mptscsih does not discover any controllers nor drives, and things like

All, I am running xen3.0.2 and xen unstable on RHEL 4, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! Then system reboot.In grub.conf,I have

All, I am running xen3.0.2 and xen unstable on RHEL 4, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! Then system reboot.In grub.conf,I have

I installed the xen 2.6 binary tarball on my Linux 2.6 Fedora Core x86 system and added the entry to the grub.con file. I am still not able to get it up and working. It keeps restarting itself during the boot process. I''ve managed to capture the contents of the boot at the end before it restarts: error opening /dev/console error dup2''ing fd of 0 to 0 error

I encountered same error when use Xen3.0.2(source file) on CentOS4.2, after I downgraded to Xen2.0.7(source file), this error disappeared. now, I am using Xen2.0.7 instead of 3.0.2, it works well. --taylor -----邮件原件----- 发件人: xen-users-bounces@lists.xensource.com [mailto:xen-users-bounces@lists.xensource.com] 代表 xen-users-request@lists.xensource.com 发送时间: 2006年6月15日 5:24 收件人:

I''m struggling to get Xen to boot on a FC4 Opteron box. I''ve included the tail of the boot log below [1]. I suspect that the problems relates to the software RAID 1 root and boot partitions, and how it relates to the initrd image. The RAID volumes fail to mount. I compiled the Xen snapshot from the 23rd September, and the only change I''ve made is to enable the

Hi, everybody! My pxelinux.0/default file is: LABEL linux KERNEL vmlinuz-2.6.16 APPEND initrd=initrd-2.6.16.img root=192.168.4.110:/clients/192.168.4.100/root When mounting I get: switchroot: mount failed: 22 Kernel panic - not syncing: Attempted tp kill init! Before it I get some messages about: Can't find /dev/console. /clients/192.168.4.100/root/dev was empty. I've copied my

Hi All, I am trying to compile Xen 3.3.0 source code which downloads updates from mercurial repository. I am trying to modify the CPU scheduler, but before i make any changes i need to test it by installing it from source. OS: Fedora 8 Linux I compiled the source code by using [root@localhost xen-3.3.0]# make world [root@localhost xen-3.3.0]# make install [root@localhost xen-3.3.0]#

Hi folks, After using 3.0.3 at work for awhile I decided to upgrade my 3.0.2 install at home to 3.0.3; however, I ran into issues with my IDE disk not being discovered. The full log can be seen here: http://www.techmonkeys.org/xen.txt I think this is the part most people will care about: Red Hat nash version 4.2.1.8 starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev

Hi, In tablegen file inside class we have variables declared inside a class. Say in PPC there is this class BForm<bits<6> opcode, bit aa, bit lk, dag OOL, dag IOL, string asmstr> : I<opcode, OOL, IOL, asmstr, IIC_BrB> { bits<7> BIBO; // 2 bits of BI and 5 bits of BO. bits<3> CR; bits<14> BD; How does the generator match each variable against an

virt-p2v was able to convert my centOS 5.2 physical machine to xen virtual machine and it runs great. Now, I am working on to convert this full virt machine to para virt . Under my domU i have installed kernel-xen (since it is needed ) , and edited my grub menu to use the installed kernel. My grub menu file in domU looks like: ---- kernel /vmlinuz-2.6.18-92.1.17.el5xen ro

Hi there, I'm using xen-3.0.2.2-86.1_rhel4.1 on a Redhat AS 4 update 1 for i386. When I create a new domU with the following conf file, everything is ok: ##BEGINNING## kernel = "/boot/vmlinuz-2.6.16-xen3_86.1_rhel4.1" ramdisk = "/boot/initrd-2.6.16-xen3_86.1_rhel4.1.img" builder='linux' memory = 1024 name = "myvm" vcpus = 8 vif = [

I hope the CentOS people don't mind me cross-posting for their input. I've just done a clean, text-mode minimal WBEL4 install on an IBM Netfinity 4500, essentially the same hardware as an xSeries 340. The install went fine but now the box will boot, run through the initrd init sequence, perform its switchroot then hang here... SELinux: Initializing. SELinux: Starting in permissive mode

hi , all . The command ''xend start'' can be ran successfully. There was some trouble with the command ''xm create -c a.cfg'' when I intended to create a guest os. The part of log is following: >>TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >>TCP: Hash

HI guys: While I ran xen 4.0.1 in RHEL5.4 , an kernel panic were found that displayed as follow: PCI: Not using MMCONFIG. Red Hat nash version 5.1.19.6 starting IRQ handler type mismatch for IRQ 288 cciss: Unable to get irq 288 for cciss0 mount: could not find filesystem ''/dev/root'' setuproot: moving /dev failed: No such file or

[1]Click here to unsubscribe if you no longer wish to receive our emails Dear Recruiter, Let me present you with list of consultants currently available. E-Mail me for below candidate details. My Mail ID : srikanth at codeforce.com Consultant Job Title Total Experience Current Location Availability Action Atrayee Paul Sr. ETL Datastage Developer 7 years Detroit Metro Area

Hi, I'm currently trying to install CentOS 5.5 on a series of Lenovo Thinkcentre nettops. At first, the install CD boots OK without any options, but when it comes to formatting, the process can only be described as terribly slow... it took about half an hour to format the 160 GB disk. A few cups of coffee later, the system boots with the following messages on bootup (right at the

Hi all, Im network booting initrd-2.6.9-22.EL.img from pxelinux. <snip from init script> echo Creating root device mkrootdev /dev/root umount /sys echo Mounting root filesystem mount -o defaults --ro -t ext3 /dev/root /sysroot mount -t tmpfs --bind /dev /sysroot/dev echo Switching to new root switchroot /sysroot echo UMOUNTING initrd-dev umount /initrd/dev </snip> I receive error