similar to: How HVM domain distingush ioemu disk and VBD disk

Hi, This issue only happens on my IA32E VMX domain. IA32 VMX domain is okay. I am trying VBD disk in IA32E VMX domain. I used following disk configuration to create an IA32E VMX domain. disk = [ ''file:/mnt/disk1.img,hda,w'', ''file:/mnt/disk2.img,hde,w'' ] After creating VMX, its keyboard can not be used properly. For example, if pressing

>-----Original Message----- >From: xen-users-bounces@lists.xensource.com >[mailto:xen-users-bounces@lists.xensource.com] On Behalf Of Liang Yang >Sent: 2006年9月12日 8:57 >To: xen-users@lists.xensource.com >Subject: [Xen-users] Help: Xen HVM Domain can ONLY support four hard >drivesat most??? > >Hi, > >I have 5 SATA hard drives and I want to expose all these five

Hello, My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I noticed on the log that suddenly we are getting messages such as : Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 247 to 246 Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance

OK, been perusing the archives and Google, but can't find what I want. I'm building up a 512 MB compact flash using the CLFS directions to build the filesystem. That works great, but I would like to use extlinux to make the cflash bootable on my little SBC. However, to date, no dice. Attached is my extlinux.conf file and the steps I have used to make this work. Initially I tried to

Issue: Vista reads slowly from a samba server. This appears to pop up periodically here and elsewhere. My samba.conf file has: [homes] ... vfs objects = readahead As suggested elsewhere. Writes are approximately 17-18MB/s which is acceptable. Reads are in the 8MB/s range which is appalingly slow. Using linux smbclient and windows XP clients I can read at 25+MB/s. I've enabled vfs

Hi: we have following setup: 1. 2.6.16-33-based Xen 3.0.3/Xen-3.0.4 DOM-0 kernels. 2. Using LILO-mbootpack from USB we boot Xen-->DOM-0 setup 3. We mount harddisk and try to install xp.hvm While,we are successful with FCs as DOM-U, for XP we get, VBD (768) could not be connected. We do have max_loop count to 64 and enough loop devices. Note that above error is consistent on both 3.0.3

Hi Konrad, I just tried linux-3.4-rc0 (linus his tree, last commit f52b69f86e27903d6896ed5fa7cd280fec8de532) with 3 additional branches from your tree pulled on top of that: branch stable/for-ingo-3.4.v2 (required for dom0 to boot) branch stable/for-jens-3.4 branch stable/for-jens-3.4-bugfixes Hypervisor is xen-4.1.3-rc1-pre linux 3.3 vanilla works fine Booting dom0 goes fine, but

> PDC20265: IDE controller at PCI slot 0000:00:11.0 > PCI: Found IRQ 10 for device 0000:00:11.0 > PDC20265: chipset revision 2 > PDC20265: 100% native mode on irq 10 > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary > PCI Mode. > ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio > ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio,

We have found a critical problem with the XEN 3.1 release (for those who are running 15-20 VMs on a single server). We are using the official XEN 3.1 release on a rackable server (Dual-Core AMD Opteron, 8GB RAM). The problem we are seeing is that intermittently vifs fail to work properly in VMs after we create around 15-17 VMs on our server (all running at the same time, created one by

I have a CentOS 5.6 system (recently installed) that, for some reason, has decided to mangle one of its drives, specifically /dev/hde1 ... No errors anywhere, just rebooted the machine over the weekend and it's gone. Up till the reboot, the drive was fine, I was writing to it without a problem. fdisk tells me: ---------- # fdisk -l /dev/hde Disk /dev/hde: 160.0 GB, 160041885696

OK, I have managed to get software RAID 1 running on my wonderful Proliant server but now have two challenges: 1) Fresh after an OS install and reboot, the RAID array starts to do its stuff but straight away (as part of the boot messages) I am told that the second disk is 'not ready for command' and the system hangs as soon as resyncing starts. I think this is fixed by adding an hdparm

>-----Original Message----- >From: Jan Beulich [mailto:jbeulich@novell.com] >Sent: 2006年9月12日 17:06 >To: You, Yongkang >Cc: xen-devel >Subject: Re: [Xen-devel] 32E (64bit) VMX keyboard is out of control, ifgiven an >addition ''hde'' > >>After creating VMX, its keyboard can not be used properly. For example, if >pressing

Dear list, I have moved my HVMs from xen to kvm and it worked well except some problems using virsh. First, one OpenSolaris HVM does boot with warnings: WARNING: /pci at 0,0/pci1af4,1100 at 1,2 (uhci1): No SOF interrupts have been received, this USB UHCI host controller is unusable* *The corresponding process: /usr/bin/qemu-system-x86_64 -S -M pc-0.12 -enable-kvm -m 1024 -smp

I'm getting this message in my logwatch email notification: --------------------- Kernel Begin ------------------------ WARNING: Kernel Errors Present sdb:<3>Buffer I/O error on device sdb, l ...: 2 Time(s) Buffer I/O error on device sdb, l ...: 12 Time(s) hde: dma_intr: error=0x84 { DriveStat ...: 12 Time(s) hde: dma_intr: status=0x51 { DriveReady

Dear all, I''ve installed Xen 3.0.1 on my laptop and dom0 is boot normaly execpt it''s could not using X, i haven''t trying to boot guest OS. my laptop configuration is Toshiba Portege R150 with Debian Sarge on it. And then I installed same version of Xen into our server with Debian Sarge and Kernel 2.4. Booting dom0 is not success , xen always trying look dor NFS root and

I am trying to get PV drivers running on both Centos 5.1 and Centos 5.3 HVMs, my DomU is Centos 5.2 with Xen 3.31. For 5.1 I install the kmod-xenpv RPM but for 5.3 the drivers seem to be built-in. For the network drivers to work I had to unload the Realtek NIC driver and renamed its .ko files to stop it loading. Adding the Xen-Vnif alias to modprobe.conf then got the PV NICs working nicely (Much

Have 4 harddrives hde,hdg etc all of these drives are mounted in samba. When i copy file from one drive to another i notice that server sends the file to my computer and then back to itself (into the right place). The file will be copied but doing so it will eat half of my network bandwith. Is it possible to aviod this? Best Regards Patrick Betfjord

>-----Original Message----- >From: Jan Beulich [mailto:jbeulich@novell.com] >Sent: 2006年9月12日 18:05 >To: You, Yongkang >Cc: xen-devel >Subject: RE: [Xen-devel] 32E (64bit) VMX keyboard is out of control,ifgiven an >addition ''hde'' > > >Not sure what RC3 is, but the other two are Linux-es: Can you try rebuilding >the guest kernels with attached

In my vm2 config i have: disk = [ ''phy:/dev/volumes/vm2-disk,hda,w'', ''phy:/dev/volumes/vm2-swap,hdb,w'', ''phy:/dev/volumes/vm2-data,hdc,w'', ''file:/xen/images/office2007basic.iso,hdd,r'', ''file:/xen/images/printshopinstall.iso,hde,r'',

Hi All, We tested the xm block-attach/detach command. It repeats block-attach/detach command for DomU and pv-on-hvm on HVM Domain. (block-attach -> block-detach -> block-attach -> block-detach -> ...) The block-attach command failed when repeating 256 times. It is because the channel had not been freed in blkfront. Therefore, it remain using the event channel. This patch is