similar to: in the makefile for wget ftp:// etc.

Whilst tinkering with lvm (which now works great - thanks!), I made a typo which caused the domain to stop booting. I think it was just that I got the config file wrong in terms of which device mapped to which. Anyway, I had specified ''restart=True'' and so the domain was starting to boot, failing, then restarting again. This was the expected behaviour, but it was a pain to kill.

The Xen boot option ''ser_baud=<baud>'' has been removed from the unstable tree. If you were still using this obsolete option then the effect is that you will get no serial output when you boot Xen, which may lead you to believe that there is a more serious problem. To fix this you must move to the new boot option: ''com1=<baud>,8n1'' -- Keir

I was wondering if anyone here has or knows how to implement ttysnoop w/ssh ?

Hi! I use standard Bering 2.2.2. I am trying to get my FTP-server to work with another portnumber than 21 (On port 21 all works great, but I´m really interested in running two FTP-servers, so I want to figure this one out first). Read the FAQ: http://www.shorewall.net/FTP.html and now I got this setup: In Rules: DNAT net loc:192.168.3.2 tcp 99 In Shorewalls modules.conf (tried

Hello I''ve setuped a bridge with iptables + layer + ipp2p + tc I don''t know how to shape passive ftp ? If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ... When I done a tcpdump I can see that othe port than 20 or 21 are used ... Any Ideas of how I can achieve this ? Regards

New install of CentOS 4.1; our first try at the 4.x. On previous 3.x installs we've used proftpd. On this one we're using (trying to use is a better statement of what we're going through) the default daemon, /usr/sbin/vsftpd. But we don't get anywhere. <snip> ftp> passiv Passive mode off. ftp> put ~/xorg.conf.work local: /home/jlasman/xorg.conf.work remote:

Hi, I have tried unsuccesfully to limit my ftp server send speed in linux. I have an ipcop linux firewall/router with 2 nics. 1 nic (eth1) is connected to a 3mbit/384Kbit cable connection and the other (eth0) a switch. Behind it i have a suse linux box and a windows box. On the suse box i run proftpd. I need to shape my passive ftp send speed to 34KBytes because if it is maxed out at 45K

Hi all, I want to run vsftp behind a firewall.(i.e DMZ zone) . It is runnig as passive ftp. the theroy behind passive ftp is , - FTP server's port 21 from anywhere ( Client initiates connection) - FTP server's port 21 to ports > 1024 (Server responds to client's control port) - FTP server's ports > 1024 from anywhere (Client initiates data connection to

Hi, I''m using the same set of firewall rules of 2.0.x (sorry, I can''t remember the exact minor version) and put it to work with 2.0.9. And now I can''t do passive ftp (was working before). I see that my NEWNOTSYN is set to Yes, and the loc->net rule is blocking 1024:65535. But I believe with the ip_conntrack_ftp, the passive mode would be allowed, since

Hello everyone, I run a Pure-FTP server on my DMZ. I can specify with Pure-ftp what ports will be used for clients when they connect with passive mode. I entered 50000 50400, so I have enough for 200 users at the same time. Then the pure-ftp website tells me to open up those ports on the firewall. How do I do this? In my rules file is now something like: ACCEPT net dmz:10.0.0.2 tcp

Hi, I use for a customer a Linux router/firewall with 1 internal interface connected to the LAN and 3 external interfaces connected to 3 different ISP. I use a kernel 2.6.17 with a routes patch from Julian Anastasov. I mark outgoing FTP traffic for the routing. With the rules below I do not have a problem with the active/normal FTP to connect on FTP server. But the passive FTP does not pass

Howdy I'm trying to run FTP server behind firewall. And i can't enable passive mode from the Internet. There are plenty howtos but there aren't many with my combination. For now i have configured port forwarding and ftp server itself. On the router: # firewall-cmd --list-all --zone=external external (active) interfaces: enp3s1 sources: services: openvpn ssh ports: 1194/tcp

I just installed CentOS4 on my main server. It runs proftpd and is not NATted.. When I did the install I said to allow FTP and HTTP. I can ftp from windows dos ftp client. In IE I get "Unable to build data connection: No route to host" ncftp I get.. Data connection timed out. Falling back to PORT instead of PASV mode. List failed. Wget and FireFox just time out. Anything I need

Hi all, I want to run vsftp behind a firewall.(i.e DMZ zone) . It is runnig as passive ftp. the theroy behind passive ftp is , - FTP server''s port 21 from anywhere (Client initiates connection) - FTP server''s port 21 to ports > 1024 (Server responds to client''s control port) - FTP server''s ports > 1024 from anywhere (Client initiates data

Res, I continued testing my FTP and don''t works correctly... 8( #ftp myserver.domain.com Connected myserver.domain.com 220- -=3D MYSERVER =3D- 220-You are user number 2 of 5 allowed. 220-Local time is now 16:46 and the load is 0.03. Server port: 21. 220-This is a private system - No anonymous login 220 You will be disconnected after 5 minutes of inactivity. 500 Security extensions not

Hi all! I am a long time lurker, but have not posted until now. My old trusted firewall machine broke a couple of weeks ago and I replaced it with a XEN domU that is using DNAT and has two interfaces. The firewall domU and the FTP server domU are both guests on the same dom0. All three machines are running Debian/etch (stable) and Shorewall has version 3.2.6. I can''t get FTP to work

Hi I've been looking at a both openssh and couple of commercial SSH implementations(F-Secure and ssh comm.). The one thing I see as missing is the "nice-to-have" feature of FTP specific port forwarding. The commercial implementations allows a syntax of "-L ftp/<someport>:..." which does some "automagical" forwarding of the data channel "under the

Hi All How to classify packets belonging to a FTP session? Port 21 session is easy. but what about data transfers? Their port numbers (both) are above 1024. I was thinking about ip_conntrack_ftp. Something like: iptables -A FORWARD -p tcp --sport 1024: --dport 1024: \ -m state --state ESTABLISHED,RELATED -j CLASSIFY --set-class X:Y But what if I also have ip_conntrack_irc, for instance.

I am trying to mark outbound passive ftp traffic with iptables and shape it to 35KBytes. I am using the following script on the computer that runs the ftp server. It is not working correctly, it seems to limit ALL traffic. Cant file share or anything. Anyone might know what is wrong? It seems that I might need to add a ''lan limit'' so all traffic that is not marked still

Will the following rules work to mark and shape OUTBOUND ftp speed (passive ftp ports 50000-60000) on my linux server? I want to be able to run these commands on the actual computer that is running the ftp server. iptables -t mangle -N MYSHAPER-OUT iptables -t mangle -I POSTROUTING -o eth0 -j MYSHAPER-OUT iptables -t mangle -A MYSHAPER-OUT -p tcp --dport 50000:60000 -j MARK --set-mark 1 tc