similar to: Scripting

Hiya, Is there any reason (and anything to worry about) if disk target IDs don''t start at 0 (zero). For some reason mine are like this (3 controllers - 1 onboard and 2 PCIe); AVAILABLE DISK SELECTIONS: 0. c8t0d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63> /pci at 0,0/pci10de,cb84 at 5/disk at 0,0 1. c8t1d0 <ATA -ST9160314AS -SDM1

I''m just uploading all my data to my server and the space used is much more than what i''m uploading; Documents = 147MB Videos = 11G Software= 1.4G By my calculations, that equals 12.547T, yet zpool list is showing 21G as being allocated; NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT dpool 27.2T 21.2G 27.2T 0% 1.00x ONLINE - It doesn''t look like

Hey Guys, Have any of y''all seen a condition where the ILOM considers a disk faulted (status is 3 instead of 1), but ZFS keeps writing to the disk and doesn''t report any errors? I''m going to do a scrub tomorrow and see what comes back. I''m curious what caused the ILOM to fault the disk. Any advice is greatly appreciated. Best Regards, Jason P.S. The system is

Hi, I am not able to execute the commands on ILOM using ssh . Have a look below screenshot. Can you help me in creating SSH session with ILOM . root at localhost ~]# ssh root at 10.255.17.102 "show /SYS" Password: shell: Invalid credentials But directly i am able to connect ILOM using ssh . Regards, Deepak

Hi. After running with the crossbow bits for a while, I discovered that the network management port on my T1000 wasn''t working properly (no link light). When logging in on the serial management port and running "resetsc", I got this: --->8--- ALOM POST 1.0 Dual Port Memory Test, PASSED. TTY External - Internal Loopback Test TTY External - Internal Loopback Test, PASSED.

I am using a Solaris + ZFS environment to export a iSCSI block layer device and use the snapshot facility to take a snapshot of the ZFS volume. Is there an existing Volume Shadow Copy (VSS) implementation on Windows for this environment? Thanks S Joshi -------------- next part -------------- An HTML attachment was scrubbed... URL:

If I use the Xvm pv guest console in ILOM GUI, I can''t detach it because I can''t press ctrl + ] Even when using the lock altgr key, when pressing ctrl this lock is silently disabled. Maybe some one could tell me how to press ctrl + AltGr + 9 in ILOM thx, florian

hi all Try to learn how UFS root to ZFS root liveUG work. I download the vbox image of s10u8, it come up as UFS root. add a new disks (16GB) create zpool rpool run lucreate -n zfsroot -p rpool run luactivate zfsroot run lustatus it do show zfsroot will be active in next boot init 6 but it come up with UFS root, lustatus show ufsroot active zpool rpool is mounted but not used by boot Is this a

I have a fresh install of Solaris 11 Express on a new SSD. I have inserted the old hard disk, and tried to import it, with: # zpool import -f <long id number> Old_rpool but the computer reboots. Why is that? On my old hard disk, I have 10-20 BE, starting with OpenSolaris 2009.06 and upgraded to b134 up to snv_151a. I also have a WinXP entry in GRUB. This hard disk is partitioned, with a

Hi everybody, Recently, I found the Lifelong Code Optimization project on the website. And I have a question here, would you please explain it for me? In the home page of the project, it is said that the Goal of the project is to enable mordern programs to be optimized at link time with all static binary code. Here I wonder, why the library code must be static, i.e. why a dynamically

Article by Jeff Layton: http://www.linux-mag.com/id/7839 anyone have views on whether this sort of caching would be useful for the MDT? My feeling is that MDT reads are probably pretty random but writes might benefit...? GREG -- Greg Matthews 01235 778658 Senior Computer Systems Administrator Diamond Light Source, Oxfordshire, UK

I am running zfs-fuse on an Ubuntu 10.04 box. I have a dual mirrored pool: mirror sdd sde mirror sdf sdg Recently the device names shifted on my box and the devices are now sdc sdd sde and sdf. The pool is of course very unhappy about the mirrors are no longer matched up and one device is "missing". What is the proper procedure to deal with this? -brian -- This message posted from

Hello, There is a feature of zfs (autoexpand, or zpool online -e ) that it can consume the increased LUN immediately and increase the zpool size. That would be a very useful ( vital ) feature in enterprise environment. Though when I tried to use it, it did not work. LUN expanded and visible in format, but zpool did not increase. I found a bug SUNBUG:6430818 (Solaris Does Not Automatically

Hi Terry, I'm not part of that project but I'll take a stab at answering your question. Vikram Adve is probably the person to answer. The point of Lifelong Code Optimization is to continuously optimize the code during its lifetime, even while it is running. By profiling the code, it is possible to discover the program's hot spots and intensely optimize those portions of the program.

Hi all; We have a Solaris 10 U9 x86 instance running on Silicon Mechanics / SuperMicro hardware. Occasionally under high load (ZFS scrub for example), the box becomes non-responsive (it continues to respond to ping but nothing else works -- not even the local console). Our only solution is to hard reset after which everything comes up normally. Logs are showing the following: Jan 8

So, there will be an LLVM Social in the Chicago area. We know what you now think, an LLVM Social in Chicagoland? Finally! If you are interested in showing up __ for the first meeting __, use the doodle [0] to indicate your preferred dates. Note that the weekend was chosen for the first meeting only. We expect to discuss future meeting details (times, locations, style, ...) at this first

I had been running CentOS 5 happily on my Sun Fire X4200 M2 systems, then I upgraded the BIOS and iLOM firmware. Now I'm running into what seems to be a fairly common problem with newer motherboards. I cannot boot unless I use the 'noapic' kernel option. If I try to boot the kernel normally, I get the error: "MP-BIOS bug: 8254 timer not connected to IO-APIC" I can

Hi unfortunately VirtualBox does not work yet in a Solaris Dom0: I installed VirtualBox beta and it runs fine on bare metal. Unfortunately the necessary driver does not load automatically in a xVM Dom0. It can be loaded manually but it looks like it does not work in a Dom0: bash-3.2# modinfo | grep vbox # this is a one time task: bash-3.2# cp /platform/i86pc/kernel/drv/amd64/vboxdrv

Hi list, I'm new to clustering, and I'm running a little cluster at home. The cluster is running on a workstation hardware and running on Centos 6.5. Component: corosync, pacemaker, drbd and pcs. All works good. This cluster has different resources: 1) drbd0 2) drbd1 3) drbd0_fs 4) drbd1_fs 5) pgsql 6) smb + nmb 7) libvirt (lbs) 8) libvirt_guests (lsb) I've this constraint

Hi all, Several people have expressed interest in having regular sync-up calls to follow the progress of ARM SVE/SVE2 support in LLVM. With this effort picking up steam and multiple people contributing patches, regular sync-up calls would provide a platform to coordinate our efforts. Items to discuss in these sync-up calls would include: - SVE/SVE2 CodeGen support - Adding support for C/C++