similar to: xen 4.1.1 get error "device eth0 does not seem to be present delaying initialization".

hi xen cracks :-) i managed sucessfully to install xen4 on a debian 6.0 squeeze amd64 box, running 3 hosts windows 2008r2 server and 1 host squeeze. i use a hp server dl 160g6 dual processor with 48gb ram and 2 tb disks with sw raid 1. i have an indentical hardware box to setup remus. now, the problem is, i cant find remus on my box, like i saw it in several descriptions: /usr/bin/remus!

Hi All :) I have three servers, all with centos 7 installed 3 days ago. I need on them "old" naming scheme (ethX) for network interfaces, because of that: # grep GRUB_CMDLINE_LINUX /etc/sysconfig/grub GRUB_CMDLINE_LINUX="rd.lvm.lv=centos_node-XY/swap rd.lvm.lv=centos_node-XY/root rhgb quiet ipv6.disable=1 net.ifnames=0" net.ifnames=0 was added and afterwards I ran:

hi all, i just wonder, after searching the online resources, if there is any paper describing howto uninstall completelly xen: - xen, - tools and - stubdom from a debian box. maybe also a brief description how to update, for example, a xem 4.1.2 to 4.2 in a future step? i use: - debian 6.0.5 amd64 - xen 4.1.2 - kernel 3.4.4 thanks a lot for your answers walter.

On Wed, 21 Oct 2015 10:20, Rafa? Radecki <radecki.rafal at ...> wrote: > Hi All :) > > I have three servers, all with centos 7 installed 3 days ago. I need on > them "old" naming scheme (ethX) for network interfaces, because of that: > > # grep GRUB_CMDLINE_LINUX /etc/sysconfig/grub > GRUB_CMDLINE_LINUX="rd.lvm.lv=centos_node-XY/swap

Hi, Centos 6.8 comes with pulseaudio 0.9, but I want to use pulseaudio 6.0 or higher version, which is used on centso 7. How to build/install new pulseaudio on centso 6.8? Are there some dependency libs for pulseaudio? is there some rpm of pulseaudio 6.0 for centos 6.8? Thanks Regards andrew

hi alll.. i want to find the xen domain''s state using xm domstate command, domstate command works fine inside virish but when i try with xm like [xm domestate VM_NAME] its giving an error saying subcomand domestate not found. i just want to shutoff the xen virtual domains using a scrip to take backup. so i just want to make sure that the domain are shutdown successfully after

I can''t find network device in domU. Debian domU shows Configuring network interfaces...SIOCSIFADDR: No such device eth0: ERROR while getting interface flags: No such device and Fedora domU shows: eth0: unknown interface: No such device Dom0 is using Fedora with: kernel-xen-guest.i686 2.6.15-1.29_FC5 installed kernel-xen-hypervisor.i686

>> Centos 6.8 comes with pulseaudio 0.9, but I want to use pulseaudio >> 6.0 or higher version, which is used on centso 7. How to >> build/install new pulseaudio on centso 6.8? Are there some dependency >> libs for pulseaudio? is there some rpm of pulseaudio 6.0 for centos >> 6.8? > > From your recent previous posts, you appear to want to have a CentOS 7

Is there a cisco vpn client for linux centso 5 AMD 64 bit? Using google it talks about cisco vpn client but everyplace to download is blocked. I then found a vpnc reference but did not find a 64 bit version. yum install vpnc did nothing.... What is my next step? Jerry

Hi all, I installed XEN on a CentOS 6 server, as per these instructions: http://www.crc.id.au/xen-on-rhel6-scientific-linux-6-centos-6-howto/ And the server now gives this error on reboot: PANIC: early exception 0e rip 10:0 error 10 cr2 0 These are the packages that were installed before the reboot: Total download size: 33 M Installed size: 116 M Is this ok [y/N]: y Downloading Packages:

If I try to ifup eth0, I get the following: Device eth0 does not seem to be present, delaying initialization. DomU: Linux fedora1 2.6.16-1.2133_FC5xenU #1 SMP Tue Jun 6 02:58:27 EDT 2006 i686 i686 i386 GNU/Linux config: kernel = "/boot/vmlinuz-2.6-xenU" #ramdisk="/boot/initrd-2.6.16-1.2133_FC5xenU.img" memory = 128 name = "fedora1" #dhcp = "dhcp" disk =

hi folks, anyone around who knows how to setup grub2 to allow at boot time a static memory allocation for the Domain-0. I use debain squeeze, lates update''s and my actual grub2 config doesn''t work automaticlly at boot time. i configured the arg "dom0_mem=4096M" in the grub.cfg section multiboot as shown bellow: *** menuentry ''Debian GNU/Linux, with

Just installed centos 6.2. I run and ifconfig -a I see and em1 em2 and lo interface. If I go to /etc/sysconfig/network-scripts, I don't see an ifcfg-eth0. If I run ifup eth0 it comes back with "Device eth0 does not seem to be present, delaying initialization". Anybody have a clue? Thanks in advance.

Hi all, When putting multiple centos 5.1 boxes on a network (DHCP for network) and 1 centos 5.1 server is there a way that these clients can automatically "seek" the server. Is there something in centso 5.1 that an inquiry can be sent out that says: Is there a "Product XYZ" on this network? And the server - and not all the clients - can respond to this quiry. Just

I am getting these errors when I plug a zoom USB modem in my amd 64 box. usb 2-1: new full speed USB device using ohci_hcd and address 3 usb 2-1: device descriptor read/64, error -62 usb 2-1: device descriptor read/64, error -62 usb 2-1: new full speed USB device using ohci_hcd and address 4 usb 2-1: device descriptor read/64, error -62 usb 2-1: device descriptor read/64, error -62 usb 2-1: new

hi folks, after long trying i need some help from the big world :-) question ******** when I boot a guest system, tried debian 6.0.2 amd64 firmware, I get errors like: 1) after click install on debian 6.0.2 installer [0.642450] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632 [0.642911] vbd vbd-5632: failed to write error node for device/vbd/5632 (19 xenbus_dev_probe on device/vbd/5632) 2)

hi folks, after long trying i need some help from the big world :-) question ******** when I boot a guest system, tried debian 6.0.2 amd64 firmware, I get errors like: 1) after click install on debian 6.0.2 installer [0.642450] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632 [0.642911] vbd vbd-5632: failed to write error node for device/vbd/5632 (19 xenbus_dev_probe on device/vbd/5632) 2)

Everyone, This morning I did a manual yum update on our a mail server to 7.1 without any incident or problems. A new kernel was installed, and I rebooted after the update. When I rebooted the machine I could not gain ssh access to it from an external ip address. I was able to ssh to this mail server through a different machine on the local network. At first I thought the problem was

I am attempting to setup a dell inspirons 1200 laptop media accelerator 900 from intel is the chipset so I am using the i810 driver. In the default 1024x768 everything is fine. I am trying to setup the external port not the LCD to be 1366x768. I added a modeline to xorg.conf of: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor"

I fixed my immediate problem by using a different version of gcc. Chris Lattner kirjoitti: > The offending line of code looks fine on our side, > but there could be something I'm missing. For what it is worth, I've run into problems with boost_concept_check before when using Boost.Python. Some versions of gcc worked fine, while others gave error messages relating to