similar to: Question about WD drives with Super Microsystems

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

Hi, I have one Natural Microsystems AG Quad board. I want to use this board with Asterisk but I can't find how to do it. I have searched a lot in Asterisk's website and NMS's website but I can't find anything useful Someone have any experience with this board? Thanks in advance and sorry for my bad english. -- Marco Carvalho (macs) | marcoacarvalho(a)gmail.com Maceio - Alagoas

On 1/1/2015 9:41 PM, mechy2k2000 wrote: > Hello I am thinking of buying this card to and wanted to know if this NIC > is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit > Ethernet Adapter QGEXPCI 501-6738-10. Can't find any info on how well the > card plays with centos and also proxmox ve (if any of you use that distro ) I've not tried that card on anything

Hi there, I wanted to use RedCloth with my RubyOnRails 3 application, but it seems that RoR uses 1.9.2''s Psych by default as the YAML parser if available, and Psych fails to load the LaTeX entities file: ==================================================================== #ruby -v: ruby 1.9.2p136 (2010-12-25 revision 30365) [x86_64-linux] irb(main):001:0> Dir.pwd =>

Hello I am thinking of buying this card to and wanted to know if this NIC is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit Ethernet Adapter QGEXPCI 501-6738-10. Can't find any info on how well the card plays with centos and also proxmox ve (if any of you use that distro ) If things don't seem to work I may bite the bullet and buy an Intel card thanks Rafeal Stewart

On Fri, Jan 2, 2015 at 1:35 AM, Rafeal Stewart <mechy2k2000 at gmail.com> wrote: > On Thu, 2015-01-01 at 22:01 -0800, John R Pierce wrote: > > On 1/1/2015 9:41 PM, mechy2k2000 wrote: > > > Hello I am thinking of buying this card to and wanted to know if this > NIC > > > is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit > > >

I have a WD Elements 2TB USB hard drive. I would like to encrypt the whole drive with TrueCrypt on my CentOS box. Could someone direct me to a tutorial on how to do this? Ideally, I would also like to access it with my WinXP box, but this part is optional. Thanks for your help. Mike.

Hi, Whenever I issue this commands (as in the help for the threshold function), # # Do a 1D decomposition # tdecomp <- wd(test.data) # # Threshold it # tdecomp.thresh <- threshold(tdecomp) # # Reconstruct from the thresholded coefficients # trecons <- wr(tdecomp.thresh) # #

ood morning, I am reaching out to discus an issue I am having with setting a working directing. I have tried github, stack overload, setwd, getwd, all to no avail. I am used to setting a working directory in 3.1.1 and have yet to get 3.4.1 to work properly. Let me know if there is anyone who I can talk to about this. Thank you so much, My best, Peter Wight, MPA [[alternative HTML version

Hi, I'm puzzled by an ASUS P5GC-MX/1333 with a WD320AAJS disk. My 5.2 DVD refused to see the hard disk. As the CD happened to have a bad MD5 sum, I assumed this was due to a bad burnt image. Backed off to 5.1. Installation of 5.1 to /dev/sda went OK, then I upgraded by yum to 5.2. But, at the next boot, the new kernel can't see the disk. Only when BIOS IDE Setup is "compatible"

On 03/01/2016 09:53 AM, Emmanuel Noobadmin wrote: > > Since I'm likely to use Reds again, it is a bit of a concern. So > wondering if I just happen to get an unlucky batch, or is there some > incompatibility between the Reds and the Intel C236 chipset, or > between Red / C236 / Centos 7 combo or the unlikely chance WD has > decided to do something with the firmware to make

> However, the latest C7 server I built, ran into problems with them on > on a Intel C236 board (SuperMicro X11SSH) with tons of "ata bus error > write fpdma queued". Googling on it threw up old suggestions to limit > SATA link speed to 1.5Gbps using libata.force boot options and/or > noncq. Lowering the link speed helped to reduce the frequency of the > errors (from

On 3/1/2016 9:53 AM, Emmanuel Noobadmin wrote: > However, the latest C7 server I built, ran into problems with them on > on a Intel C236 board (SuperMicro X11SSH) with tons of "ata bus error > write fpdma queued". Googling on it threw up old suggestions to limit > SATA link speed to 1.5Gbps using libata.force boot options and/or > noncq. Lowering the link speed helped to

Emmanuel Noobadmin wrote: > Might be slightly OT as it isn't necessarily a CentOS related issue. > > I've been using WD Reds as mdraid components which worked pretty well > for non-IOPS intensive workloads. > > However, the latest C7 server I built, ran into problems with them on > on a Intel C236 board (SuperMicro X11SSH) with tons of "ata bus error > write

Hi there, I have found a bunch of sites explaining how to mount the WD mybook World Edition 2 via samba. Fine and Dandy - I've been able to mount the drive. I still am unable to write from the ubuntu server to the drive mounted via samba. What are some things I can check here? here is my /var/oxsemi/shares.inc the usernames have been stripped # cat shares.inc [Music]

Dear all, I have experiencing some speed issues recently when moving files using Samba between a linux box (Kubuntu 10.10) and a media player called WD TV Live. Both are wired to a 100 Mb network, together with a Windows 7 box. In principle I believe is not a hardware issue. When I move files between the WD TV Live and the Windows box I get speeds of around 8 MB/s. Between Kubuntu and WDTV I get

Hi. I have an Western Digital network drive My Book World Edition 500GB.. I have installed cwrsync and try to sync a folder on my local machine(Windows Vista) to my my external network drive ( in the same LAN). The strange thing is that rsync copies folders and files, but the files seems to be HIDDEN at the destination. I have tried several versions of rsync and cygwin, and also several options on

I see a really good price, and better for quantity, for 3TB drives. Now, I've been down on WD for a couple of years, since I found that they'd protected certain h/d parms from being changed (like TLER). The ones I'm looking at are the Red, which seems to be a new color (at least to me), and one technical review I've read says that they're intended for NAS, etc, and you can

Hi All, I have a WD RE4-GP which dropped an Adaptec 51645 RAID controller. I ran a smartctl short test on the drive and it failed with a read error. So I ran the Western Digital's own diagnostic software (DLGDIAG), both the short and extended test on the drive and it passed with no errors. So I ran the smartctl short test again and again it failed. I then ran smartctl long test and that

On Thu, 2015-01-01 at 22:01 -0800, John R Pierce wrote: > On 1/1/2015 9:41 PM, mechy2k2000 wrote: > > Hello I am thinking of buying this card to and wanted to know if this NIC > > is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit > > Ethernet Adapter QGEXPCI 501-6738-10. Can't find any info on how well the > > card plays with centos and also