similar to: openvswitch on xen 4.x

On 05/13/16 20:04, Laine Stump wrote: > On 05/13/2016 09:57 AM, Richard Harman wrote: >> I've debugged this, and I think the interfaceid stuff in network XML >> isn't doing much besides setting a custom interfaceid in an OpenVSwitch >> table that really has no effect on the operation of OpenVSwitch. I >> think the -- set Interface vnet0

On 05/13/2016 09:57 AM, Richard Harman wrote: > Hey folks, I'm working on setting up a Cuckoo sandbox malware lab at > home, and can't seem to get openvswitch and libvirt to work together > as-documented. I'm not subscribed to the list, so please reply-all. > Thanks in advance! > > I've debugged this, and I think the interfaceid stuff in network XML >

Howdy, Running the most recent OVS and libvirt I'm running into the following error message with virt-install: root at qemu-kvm:~/libvirt-1.0.5#<mailto:root at qemu-kvm:~/libvirt-1.0.5#> ovs-vsctl -V ovs-vsctl (Open vSwitch) 1.11.90 Compiled May 6 2013 22:37:22 root at qemu-kvm:~/libvirt-1.0.5#<mailto:root at qemu-kvm:~/libvirt-1.0.5#> root at

Hi All, First time mailing here. I have installed on a CentOS 7.0 KVM (with DPDK and OVS) one Deep Packet Inspection VM. I have one channel and some virtual traffic generator. The traffic is lost between dpdk vhostuser and the DPI VM. The setup is attached. Any suggestions or ideas? Regarding the OVS+DPDK configuration, the following configuration is already made: - SELINUX is disabled - QEMU

Hey folks, I'm working on setting up a Cuckoo sandbox malware lab at home, and can't seem to get openvswitch and libvirt to work together as-documented. I'm not subscribed to the list, so please reply-all. Thanks in advance! I've debugged this, and I think the interfaceid stuff in network XML isn't doing much besides setting a custom interfaceid in an OpenVSwitch table that

After some digging in openvswitch code. My wild guess is that vlan tag reconfiguring triggered iface_configure_qos (vswitchd/bridge.c), which in turn called netdev_set_policing to reset ingress policing rate. Although there's no ingress_policing_rate set in my case, existing ingress qdisc still remove by default. Could some openvswitch guy help to confirm and suggest how to fix or workaround?

Thank you, Laine for you time and patience to give me a detailed answer. I missed the interfaceid parameter in the docs, but now I didn't manage to get it working. > http://www.libvirt.org/formatdomain.html The docs state: "The Open vSwitch type virtualport accepts two parameters in its <parameters> element - an interfaceid which is a standard uuid used to uniquely identify

P{font-size:10pt; line-height:16; margin-left:0; margin-top:0; margin-right:0; margin-bottom:0; font-family:gulim;} (English is not my first language Sorry for my poor English ) &nbsp; OS :&nbsp; Linux nc233 2632-220171el6x86_64 #1 SMP Tue May 15 17:16:46 CDT 2012 x86_64 x86_64 x86_64 GNU/Linux CentOS release 63 (Final) open vswitch : 11190 virsh : 100 ibvirtd (libvirt) :

> Date: Thu, 22 Mar 2012 15:11:44 -0400 > From: laine at laine.org > To: libvir-list at redhat.com > Subject: Re: [libvirt] Problem with Open vSwitch and dnsmasq > > On 03/22/2012 09:10 AM, Daniele Milani wrote: > > Dear all, > > I have the following situation: > > -I replaced the standard bridge driver with the Open VSwitch one; > > I'm curious what

I am running NOX controller with a python script that prints out the destination mac and the source mac for each packet arriving at the now controller and then floods it out. So here's what happening: With em1 connected, all the packets that arrive at em1 are coming to the controller and printing out the details. However, without em1 connected to the OVS, when I have the following setup:

With outbound QoS setting in Libvirt XML, libvirt will add a tc ingress qdisc for traffic shaping. Then if you set VLAN tag to that tap device, this qdisc will automatically gone by no reason. Could anyone shed some lights where should I look into? I'm really confused and got no clue here. Thanks! Steps to reproduce -- # virsh start instance-name # virsh dumpxml instance-name ...

Date: Thu, 22 Mar 2012 11:43:03 -0700 Subject: Re: [libvirt] Problem with Open vSwitch and dnsmasq From: aatteka at nicira.com To: dano1988 at hotmail.it CC: libvir-list at redhat.com; roberto.sassu at polito.it; paolo.smiraglia at polito.it; dev at openvswitch.org On Thu, Mar 22, 2012 at 11:11 AM, Daniele Milani <dano1988 at hotmail.it> wrote: I think I could try the first solution.

Package: xcp-xapi Version: 1.3.2-14 Severity: important I chose the Open vSwitch (ovs) networking mode when I installed XCP # cat /etc/xcp/network.conf openvswitch Whenever I boot a VM, I notice that the vif interface is created (e.g. vif1.0) on dom0, and the vif is added to the ovs bridge (I can see it in the output of ovs-vsctl show) However, there is no connectivity, I can't ping the

Hello, I just setup a Xen server and wanted to use bond0 for my network connection. I ended up downloading and addeding the attatched file and making the following change in /etc/xen/xend-config.sxp. I added this line: (network-script 'network-bond netdev=bond0') Would this line be a good one to add to the commented lines and include the network-bond file in the scripts? Just thought

Hey, I have KVM installed on my Fedora 17 box. I added the network interfaces of the virtual machines to the openvswitch bridge as follows: ____ ____ / VM1\______br0_______/ em1\ \____/ | \____/ | _|_ /VM2\ \____/ virbr0 is the virtual network switch VM1 and VM2 are on the same subnet having tap interfaces vnet0 and vnet1 respectively. em1 is the default

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-5.2 Hi, We're seeing weird behaviour regarding network traffic between a Xen dom0 and domU. I reported this issue yesterday to the openvswitch-discuss mailing list, but it seems this could also be a (regression?) bug in the xen hypervisor or the linux kernel... (we've upgraded xen-hypervisor-4.0-amd64 4.0.1-4 -> 4.0.1-5.2 and

Package: src:xen Version: 4.17.3+10-g091466ba55-1~deb12u1 Severity: wishlist I wasn't sure if this script comes from Debian or Xen or somewhere else, so I thought it safest to report it here. /etc/xen/scripts/vif-bridge handles MTU settings in the vif, but the otherwise similar /etc/xen/scripts/vif-openvswitch does not. I added it in, here's the diff-c and the full fixed file is also

Hi I wrote a vif script to support openvswitch. I use it on some of my machines, so it works for non-qemu domains. Ian asked me to send it here, maybe someone wants to take a look. Bastian #!/bin/bash #============================================================================ # ${XEN_SCRIPT_DIR}/vif-openvswitch # # Script for configuring a vif in openvswitch mode. # The hotplugging system

On 03/22/2016 02:29 PM, Predrag Ivanovic wrote: > Hi. > > I'd like to use Openvswitch while running libvirt as an unprivileged user (qemu:///session). > As expected, system session works just fine with OVS. > > When I try to start the domain from user session, with the relevant network part of the domain xml edited to use openvswitch, like this > --- >