similar to: Kernel panic - not syncing: Attempted to kill init!

Hello all. I''ve upgraded my drives, and in doing so loaded FC8. Latest kernel-xen.x86_64 (2.6.21.7-5) and xen.x86_64 (3.1.2-5) available, using 2 Intel NICs with e1000 driver. All worked fine on FC5 with custom domU FC5 with pcifront and NIC drivers in kernel. Now, I''m unable to get the NICs to function inside my domU. The are visible in lspci, and ipconfig. DomU dmesg

Hello, i will describe my approach 1) I have downloaded Centos5-64bit xen image from jailtime.org 2) I have created own swap image with 512MB file size 3) I have used same as dom0 kernel 2.6.18-53.1.19.el5xen 4) I have mounted my image file and copied /lib/modules/2.6.18-53.1.19.el5xen 5) I have created custom ramdisk for domU with mkinitrd --with=xennet --preload=xenblk

more /etc/xen/scalix2 kernel="/boot/vmlinuz-2.6.18-8.1.6.el5xen" memory = 512 name = "hating-xen" vif = [''ip = "10.0.1.150", bridge=xenbr0''] disk = [ ''/dev/XEN/scalixroot,sda1,w'', ''/dev/XEN/scalixvar,sda3,w'', ''/dev/XEN/scalixswap,sda2,w'' ] It

Hello, Maybe someone can help me.... I have a guest XEN image that ran well until today. I use an LVM partition to host the guest and today on Dom0 I added another LVM to be available to this domU. This were all the commands I issued : On hypervisor lvcreate -n lintra02data -L 30G rootvg vi /etc/xen/lintra02 and add volume to file like this : disk = [

Hi all- I''m hoping someone can help me with this problem with Xen under CentOS 5.1 (RHEL 5.1) I''m having... This is the Xen package that comes stock with the distribution, I didn''t compile it from source. I can boot Domain0 and the hypervisor just fine. I''m trying to bring up a Xen guest VM and it crashes on boot, with this error: # xm create -c tcga1

Are these the current functional procedures for dropping a dom0 on a jaunty 64 bit server? xen-tools: http://bderzhavets.wordpress.com/2009/08/14/attempt-of-prevu-xen-3-4-1-hypervisor-on-ubuntu-jaunty-server-64-bit/ kernel: http://bderzhavets.wordpress.com/2009/07/07/building-xenified-2-6-30-1-kernel-via-xen-patches-2-6-30-2-tar-bz2/ Regarding the patches used in the above procedure from here:

> Simple, it's only a NAS device, and not really a file server / web > server / data base server as well. Here is something I am currently lokoing at, and wondering if you'd considered it or if anyone here has done it. I've got a bunch of existing hardware - really good IBM stuff that is all installed with CentOS (with a few exceptions). We want to move to virtualization, but

I am trying to create a para-virtualized guest with the same kernel image and initrd image as dom0. The configuration is below ================================================================================ kernel = "/boot/vmlinuz-2.6.21.7-3.fc8xen" ramdisk = "/boot/initrd-2.6.21.7-3.fc8xen.img" memory = 428 name = "fedora.fc8" vif = [ '''' ] dhcp =

Two questions (and then a bonus one), kind of interrelated, but, first, some basic info. I'm using OCFS2 on OpenSUSE 10.2, kernel 2.6.18.8(-0.7). There are three nodes in the OCFS2 cluster, backed by Openfiler iSCSI storage. First, I'm using Openfiler and iSCSI volumes to back my OCFS2 file system. The nodes that are part of the OCFS2 cluster use the file system as a shared storage

Has anyone succesfully setup, and used CentOS as an iSCSI server? I'm trying to setup a server with 4x500GB HDD's, setup in RAID 10 to act as an iSCSI server for a virtualization project, but I can't find a decent howto on how to setup an iSCSI server using CentOS. I would like to setup something like Openfiler, but we also need todo some other stuff that OpenFiler doesn't

Has anybody tried or knows if it is possible to create a MD RAID1 device using networked iSCSI devices like those created using OpenFiler? The idea I'm thinking of here is to use two OpenFiler servers with physical drives in RAID 1, to create iSCSI virtual devices and run CentOS guest VMs off the MD RAID 1 device. Since theoretically, this setup would survive both a single physical drive

I have a physical SLES11SP2/OES11 system that I''ve converted to a domU. It''s boots ok as an HVM, but when I try to boot as a PV it gets stuck. I have the kernel-xen packages installed and confident the menu.lst is correct. If I look at xm console for the VM I get the output below: Any ideas? Thanks James [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000]

Hi Has anyone got any ideas on a nfs/nas appliance that i can install on x86 hardware with a few JBOD shelves attached to it. I would like an appliance like install and based on CentOS would be great. I really like the look of www.openfiler.com but it seems to be only in RC release stage so i don't think the 'boss' would like that idea. thanks

Ok So I''ve been able to successfully create a CentOS5 virt-install on xen using LVM created partitions. But have many problems trying to install 4.4 (It does not work with virt-install hence you have to try another method). I Created a name, name-tmp, name-swap, name-root paritions. I did mke2fs and mkswap no problem everything is good. I went on further to mount the name-tmp and

RHEL5 32bit xen 3.3.0 rpms? Anyone? ;) _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Greetings list friends, Just wondering if anyone is using openfiler with Xen or XCP? If so how has the experience been? Any particular points to keep in mind? thanks, CJP _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello everyone! Working on putting a storage server together and wanted to get some input as to what motherboards have been working for people with the 3ware 9650SE-12ML raid board. This is large, bulk storage, 2-tier stuff. This will not be used for realtime editing of video or something, but a gig nic is almost a given I hope. I have an AMD chip available (AM2 slot) but I can get a new chip

I am having an issue getting a DomU to boot properly. There is never any indication of a stop error or kernel panic, it simply hangs after "Starting crond [ OK ]" and never continues. I''ve included my mkinitrd and output from xm create... please help! ##### XENBUS errors ##### XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vbd/2050

The Rocks Linux Cluster Distribution picks CentOS to build it's new distro on: http://www.rocksclusters.org/Rocks/ RocksClusters joins these other projects as picking CentOS for their base OS: SME Server: http://contribs.org/modules/phpwiki/index.php/Upcoming%20Releases%20page OpenFiler: http://www.openfiler.org/sponsors/ Asterisk at Home: http://asteriskathome.sourceforge.net/ We at the

The Rocks Linux Cluster Distribution picks CentOS to build it's new distro on: http://www.rocksclusters.org/Rocks/ RocksClusters joins these other projects as picking CentOS for their base OS: SME Server: http://contribs.org/modules/phpwiki/index.php/Upcoming%20Releases%20page OpenFiler: http://www.openfiler.org/sponsors/ Asterisk at Home: http://asteriskathome.sourceforge.net/ We at the