similar to: How create a FAT filesystem on a zvol?

Team, **Please respond to me and my coworker listed in the Cc, since neither one of us are on this alias** QUICK PROBLEM DESCRIPTION: Cu created a dataset which contains all the zvols for a particular zone. The zone is then given access to all the zvols in the dataset using a match statement in the zoneconfig (see long problem description for details). After the initial boot of the zone

We are running Solaris 10 11/06 on a Sun V240 with 2 CPUS and 8 GB of memory. This V240 is attached to a 3510 FC that has 12 x 300 GB disks. The 3510 is configured as HW RAID 5 with 10 disks and 2 spares and it''s exported to the V240 as a single LUN. We create iso images of our product in the following way (high-level): # mkfile 3g /isoimages/myiso # lofiadm -a /isoimages/myiso

Hello, I was doing performance testing, validating zvol performance in particularly, and found that zvol write performance to be slow ~35-44MB/s at 1MB blocksize writes. I then tested the underlying zfs file system with the same test and got 121MB/s. Is there any way to fix this? I really would like to have compatible performance between the zfs filesystem and the zfs zvols. # first test is a

Hi, I have a question, let''s say I have a zvol named vol1 which is a clone of a snapshot of another zvol (its origin property is tank/myvol at mysnap). If I send this zvol to a different zpool through a zfs send does it send the origin too that is, does an automatic promotion happen or do I end up whith a broken zvol? Best regards. Maurilio. -- This message posted from

I created a xen domU and using the Virtual Machine Manager. This created a large file on a zfs filesystem (in /var/lib/xen/images) containing the virtual disk image. Is there a better way to create a virtual disk? Does zpool/zfs allow to create special devices/filesystems with better I/O performance than a file over a zfs space? -- This message posted from opensolaris.org

Experts, I''m installing Oracle 9i on Solaris 10 11/06(update 3),I created some zfs volumes which will be used by oracle data file,as: # zfs create -V 200m ora_pool/controlfile01_200m # zfs create -V 800m ora_pool/system_800m ... # ls -l /dev/zvol/rdsk/ora_pool lrwxrwxrwx 1 root root 39 Apr 11 12:23 controlfile01_200m -> ../../../../devices/pseudo/zfs at 0:1c,raw

# lofiadm -a /export/home/isos/f8.iso /dev/lofi/1 # mount -o ro -F hsfs /dev/lofi/1 /mnt # share -F nfs /mnt Start virt-install :- # virt-install -n F8PVM --ram 1024 --nographics -p \ -f /dev/zvol/dsk/xvmpool/f8-disk -l nfs:192.168.1.42:/mnt -d Starting install... libvir: Xen Daemon error : GET operation failed: Tue, 15 Apr 2008 09:12:44 DEBUG Preparing mount at

-bash-3.2# zpool export exchbk cannot remove device links for ''exchbk/exchbk-2'': dataset is busy this is a zvol used for a comstar iscsi backend: -bash-3.2# stmfadm list-lu -v LU Name: 600144F0EAC0090000004A0A4F410001 Operational Status: Offline Provider Name : sbd Alias : /dev/zvol/rdsk/exchbk/exchbk-1 View Entry Count : 1 LU Name:

I''ve upgraded my system from ufs to zfs (root pool). By default, it creates a zvol for dump and swap. It''s a 4GB Ultra-45 and every late night/morning I run a job which takes around 2GB of memory. With a zvol swap, the system becomes unusable and the Sun Ray client often goes into "26B". So I removed the zvol swap and now I have a standard swap partition. The

Hi and hello, I have a problem confusing me. I hope someone can help me with it. I followed a "best practise" - I think - using dedicated zfs filesystems for my virtual machines. Commands (for completion): [i]zfs create rpool/vms[/i] [i]zfs create rpool/vms/vm1[/i] [i] zfs create -V 10G rpool/vms/vm1/vm1-dsk[/i] This command creates the file system [i]/rpool/vms/vm1/vm1-dsk[/i] and the

Hi folks, (Long time no post...) Only starting to get into this one, so apologies if I''m light on detail, but... I have a shiny SSD I''m using to help make some VirtualBox stuff I''m doing go fast. I have a 240GB Intel 520 series jobbie. Nice. I chopped into a few slices - p0 (partition table), p1 128GB, p2 60gb. As part of my work, I have used it both as a RAW

Hi, as Richard Elling wrote earlier: "For more background, low-cost SSDs intended for the boot market are perfect candidates. Take a X-25V @ 40GB and use 15-20 GB for root and the rest for an L2ARC. For small form factor machines or machines with max capacity of 8GB of RAM (a typical home system) this can make a pleasant improvement over a HDD-only implementation." For the upcoming

Using build 70, I followed the zfsboot instructions at http:// www.opensolaris.org/os/community/zfs/boot/zfsboot-manual/ to the letter. I tried first with a mirror zfsroot, when I try to boot to zfsboot the screen is flooded with "init(1M) exited on fatal signal 9" Than I tried with a simple zfs pool (not mirrored) and it just reboots right away. If I try to setup grub

How can I set up a ZVOL that''s accessible by non-root users, too? The intent is to use sparse ZVOLs as raw disks in virtualization (reducing overhead compared to file-based virtual volumes). Thanks, -mg This message posted from opensolaris.org

Hello zfs-discuss, What would you rather propose for ZFS+ORACLE - zvols or just files from the performance standpoint? -- Best regards, Robert mailto:rmilkowski at task.gda.pl http://milek.blogspot.com

Rick McNeal and I have been working on building support for sharing ZVOLs as iSCSI targets directly into ZFS. Below is the proposal I''ll be submitting to PSARC. Comments and suggestions are welcome. Adam ---8<--- iSCSI/ZFS Integration A. Overview The goal of this project is to couple ZFS with the iSCSI target in Solaris specifically to make it as easy to create and export ZVOLs

What does it mean for the reported value of a zvol volsize to be less than the product of used and compressratio? For example, # zfs get -p all home1/home1mm01 NAME PROPERTY VALUE SOURCE home1/home1mm01 type volume - home1/home1mm01 creation 1254440045 - home1/home1mm01 used 14902492672

Hi, When deploying ZFS in cluster environment it would be nice to be able to have some SSDs as local drives (not on SAN) and when pool switches over to the other node zfs would pick up the node''s local disk drives as L2ARC. To better clarify what I mean lets assume there is a 2-node cluster with 1sx 2540 disk array. Now lets put 4x SSDs in each node (as internal/local drives). Now

Hi all, I have a 5 drive RAIDZ volume with data that I''d like to recover. The long story runs roughly: 1) The volume was running fine under FreeBSD on motherboard SATA controllers. 2) Two drives were moved to a HP P411 SAS/SATA controller 3) I *think* the HP controllers wrote some volume information to the end of each disk (hence no more ZFS labels 2,3) 4) In its "auto

I''m just wondering if anyone has tried this, and what the performance has been like. Scenario: I''ve got a bunch of v20z machines, with 2 disks. One has the OS on it, and the other is free. As these are disposable client machines, I''m not going to mirror the OS disk. I have a disk server with a striped mirror zpool, carved into a bunch of zvols, each exported via