similar to: recovering from "zfs destroy -r"

Hi I''m running OpenSolaris 148 on a few boxes, and newer boxes are getting installed as we speak. What would you suggest for a good SLOG device? It seems some new PCI-E-based ones are hitting the market, but will those require special drivers? Cost is obviously alsoo an issue here.... Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net

I have a 1.5TB disk that has several partitions. One of them is 900GB. Now I can only see 300GB. Where is the rest? Is there a command I can do to reach the rest of the data? Will scrub help? -- This message posted from opensolaris.org

Hi all I have installed a new server with 77 2TB drives in 11 7-drive RAIDz2 VDEVs, all on WD Black drives. Now, it seems two of these drives were bad, one of them had a bunch of errors, the other was very slow. After zfs offlining these and then zfs replacing them with online spares, resilver ended and I thought it''d be ok. Appearently not. Albeit the resilver succeeds, the pool status

Hi list, Here''s my case : pool: mypool state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scrub: resilver in progress for 147h19m, 100.00% done, 0h0m to go config: NAME STATE READ WRITE CKSUM filerbackup13

I created a zfs pool with dedup with the following settings: zpool create data c8t1d0 zfs create data/shared zfs set dedup=on data/shared The thing I was wondering about was it seems like ZFS only dedup at the file level and not the block. When I make multiple copies of a file to the store I see an increase in the deup ratio, but when I copy similar files the ratio stays at 1.00x. -- This

Hi, I was suffering for weeks from the following problem: a zfs dataset contained an automatic snapshot (monthly) that used 2.8 TB of data. The dataset was deprecated, so I chose to destroy it after I had deleted some files; eventually it was completely blank besides the snapshot that still locked 2.8 TB on the pool. ''zfs destroy -r pool/dataset'' hung the machine within seconds

Hi all Has anyone done any testing with dedup with OI? On opensolaris there is a nifty "feature" that allows the system to hang for hours or days if attempting to delete a dataset on a deduped pool. This is said to be fixed, but I haven''t seen that myself, so I''m just wondering... I''ll get a 10TB test box released for testing OI in a few weeks, but before

Hi, LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I''m changing LUN size on netapp and solaris format see new value but zpool still have old value. I tryed zpool export and zpool import but it didn''t resolve my problem. bash-3.00# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0d1 <DEFAULT cyl 6523 alt 2 hd 255 sec 63>

Hi all I have this server with some 50TB disk space. It originally had 30TB on WD Greens, was filled quite full, and another storage chassis was added. Now, space problem gone, fine, but what about speed? Three of the VDEVs are quite full, as indicated below. VDEV #3 (the one with the spare active) just spent some 72 hours resilvering a 2TB drive. Now, those green drives suck quite hard, but not

Hi all I''m seeing some rather bad resilver times for a pool of WD Green drives (I know, bad drives, but leave that). Does resilver go through the whole pool or just the VDEV in question? -- Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres

Always show info like ''operation not supported''. Any workaround? Thanks. Fred -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/zfs-discuss/attachments/20110316/2f58e589/attachment.html>

Hi, for zfs raidz1, I know for random io, iops of a raidz1 vdev eqaul to one physical disk iops, since raidz1 is like raid5 , so is raid5 has same performance like raidz1? ie. random iops equal to one physical disk''s ipos. Regards Victor -- This message posted from opensolaris.org

Are there any drawbacks to partition a SSD in two parts and use L2ARC on one partition, and ZIL on the other? Any thoughts? -- This message posted from opensolaris.org

Howdy All, I''ve a bit of a strange problem here. I have a filesystem with one snapshot that simply refuses to be destroyed. The snapshots just prior to it and just after it were destroyed without problem. While running the zfs destroy command on this particular snapshot, the server becomes more-or-less hung. It''s pingable but will not open a new shell (local or via ssh) however

Hello, A college friend of mine is using Debian Linux on his desktop, and wondered if he could tap into ZFS goodness without adding another server in his small quiet apartment or changing the desktop OS. According to his research, there are some kernel modules for Debian which implement ZFS, or a FUSE variant. Can anyone comment how stable and functional these are? Performance is a

I see that Pinguy OS, an uber-Ubuntu o/s, includes native ZFS support. Any pointers to more info on this? -- David

The time has come to expand my OpenSolaris NAS. Right now I have 6 1TB Samsung Spinpoints in a Raidz2 configuration. I also have a mirrored root pool. The Raidz2 configuration should be for my most critical data - but right now it is holding everything so I need to add some more pools and move some data around. To start I need a vdev I will call "temp" that acts as a networked bit

I have three zpools on a server and want to add a mirrored pair of ssd''s for the ZIL. Can the same pair of SSDs be used for the ZIL of all three zpools or is it one ZIL SLOG device per zpool? -- This message posted from opensolaris.org

Hi, we ran a benchmark using btrfs on a server that essentially does the equivalent of the following: Open one large (25GB) test-set file for reading, which consists of many small randomly generated messages. Each message consists of a primary key (an integer in the range of 0 to 1,000,000) and a random number of arbitrary data bytes (length in the range from 10 to 1000 byte). For each message,

What would the performance impact be of splitting up a 64 GB SSD into four partitions of 16 GB each versus having the entire SSD dedicated to each pool? Scenario A: 2 TB Mirror w/ 16 GB read cache partition 2 TB Mirror w/ 16 GB read cache partition 2 TB Mirror w/ 16 GB read cache partition 2 TB Mirror w/ 16 GB read cache partition versus Scenario B: 2 TB Mirror w/ 64 GB read cache SSD 2 TB