similar to: Pool error in a hex file name

Hi all, I would like to add a new partition to my ZFS pool but it looks like it''s more stricky than expected. The layout of my disk is the following: - first partition for Windows. I want to keep it. (no formatting !) - second partition for OpenSolaris.This is where I have all the Solaris slices (c0d0s0 etc). I have a single ZFS pool. OpenSolaris boots on ZFS. - third partition: a FAT

I have configured a test system with a mirrored rpool and one hot spare. I powered the systems off, pulled one of the disks from rpool to simulate a hardware failure. The hot spare is not activating automatically. Is there something more i should have done to make this work ? pool: rpool state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for

Hello, Has anyone encountered the following error message, running Solaris 10 u8 in an LDom. bash-3.00# devfsadm devfsadm: write failed for /dev/.devfsadm_dev.lock: Bad exchange descriptor bash-3.00# zpool status -v rpool pool: rpool state: DEGRADED status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in

I have a system running in a VM with a root pool. The root pool occasionally shows a fairly stern warning. This warning comes with no check sum errors. bash-3.00# zpool status -vx pool: rpool state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore

# lucreate -n B85 Analyzing system configuration. Hi, after typing # lucreate -n B85 I get the following error: No name for current boot environment. INFORMATION: The current boot environment is not named - assigning name <BE1>. Current boot environment is named <BE1>. Creating initial configuration for primary boot environment <BE1>. ERROR: Unable to determine major and

Hi, all, I think I''m missing a concept with import and export. I''m working on installing a Nexenta b134 system under Xen, and I have to run the installer under hvm mode, then I''m trying to get it back up under pv mode. In that process the controller names change, and that''s where I''m getting tripped up. I do a successful install, then I boot OK,

I spend yesterday all day evading my data of one of the Windows disks, so that I can add it to the pool. Using mount-ntfs, it''s a pain due to its slowness. But once I finished, I thought "Cool, let''s do it". So I added the disk using the zero slice notation (c0d0s0), as suggested for performance reasons. I checked the pool status and noticed however that the pool size

Hello, Since I''ve got my disk partitioning sorted out now, I want to move my BE from the old disk to the new disk. I created a new zpool, named RPOOL for distinction with the existing "rpool". I then did lucreate -p RPOOL -n new95 This completed without error, the log is at the bottom of this mail. I have not yet dared to run luactivate. I also have not yet dared set the

Folks: I am unable to get my opensolaris sn-b85 domU to start up in an opensolaris sn-b85 dom0. I am booted to xvm. Other systems, such as Fedora 8, WinXP Pro, W2k3 server, W2k8 server and Windows Vista startup normally. I have used the following to build the domU: # mkfile -n 25g /solhvm/solhvm.img # ls -l /solhvm total 269 -rw------T 1 root root 26843545600 Jul 7 10:37 solhvm.img

Not sure if this possible, but I have a KVM guest running Solaris 10 with the OS on ZFS and I am trying to use libguestfs/guestfish/guestmount to get to the VM. I am running Red Hat EL 5.4 with EPEL rpms as required. The VM is on a LV and it boots fine, but I can't seem to get the syntax correct to get libguestfs to deal with it. Guestmount seemed like the best option because it supports FUSE

Hi, once I created a zpool of single vdevs not using mirroring of any kind. Now I wonder if it''s possible to add vdevs and mirror the currently existing ones. Thanks, budy -- This message posted from opensolaris.org

I have upgraded to trustix 2.1 (kernel 2.4.25-2trfirewall), there is a problem with shorewall (both 1.4.10d and 2.0) and iptables 1.2.9-2tr when I start shorewall I have the following errror: iptables v.1.2.9: Unknown arg ''--icmp-type'' Try ''iptables -h'' or ''iptables --help'' for more information with trustix 2.0 (kernel 2.4.25-2trfirewall)

I have an OpenSolaris snv_101 box with ZFS on it. (Sun Ultra 20 M2) zpool name is rpool. The I have a 2nd hard drive in the box that I am trying to recover the ZFS data from (long story but that HD became unbootable after installing IPS on the machine) Both drives have a pool named "rpool", so I can''t import the rpool from the 2nd drive. root at hyperion:~# zpool status

# zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT jira-app-zpool 272G 330K 272G 0% ONLINE - The following command hangs forever. If I reboot the box , zpool list shows online as I mentioned the output above. # zpool destroy -f jira-app-zpool How can get rid of this pool and any reference to it. bash-3.00# zpool status pool: jira-app-zpool state: UNAVAIL

hail, I write just to make sure its dead. I've lost the first disk on a ZFS pool (jbod). Now I can't mount it with only the second disk. The first disk clicks to death :( [root@optimus ~]# zpool status pool: pool state: UNAVAIL status: One or more devices could not be opened. There are insufficient replicas for the pool to continue functioning. action: Attach the missing

any idea what the reason for this error is? [2006-11-07 13:59:31 xend 3167] DEBUG (__init__:1072) exception looking up device number for 0: [Errno 2] No such file or directory: ''/dev/0'' my config file looks like this: name = "solaris" memory = "400" kernel = "/solaris/platform/i86xen/kernel/amd64/unix" extra =

Hi, I had a plan to set up a zfs pool with different raid levels but I ran into an issue based on some testing I''ve done in a VM. I have 3x 750 GB hard drives and 2x 320 GB hard drives available, and I want to set up a RAIDZ for the 750 GB and mirror for the 320 GB and add it all to the same pool. I tested detaching a drive and it seems to seriously mess up the entire pool and I

Hi all, Sorry for the newbie question, but I''ve looked at the docs and haven''t been able to find an answer for this. I''m working with a system where the pool has already been configured and want to determine what the configuration is. I had thought that''d be with zpool status -v <poolname>, but it doesn''t seem to agree with the

From: pbonzini@redhat.com # HG changeset patch # User Paolo Bonzini <pbonzini@redhat.com> # Date 1319096986 -7200 # Node ID bd1f7361d3d7f4c767af21317fb4ec7ea1372f42 # Parent 1b110e895e285f43f14532e14c77597e54a0bcd2 pygrub will still try the next partition if run_grub exits with a "real" error, thus hiding the root cause from the trace. Defining a separate exception for "no

I am trying to install samba 3.0.0 and getting below error when try to run ./configure… Please advise. Thanks. #pwd /usr/local/src/samba/3.0.0/source <<<<<<<<<<<<Is this correct place to run .configure ? # ./configure checking for gcc…..no checking for cc……no checking for cc……no checking for c1…….no configuration errror : no acceptable c compiler found in