similar to: ZFS Newbie question

I was recently evaluating much the same question but with out only a single pool and sizing my disks equally. I only need about 500GB of usable space and so I was considering the value of 4x 250GB SATA Drives versus 5x 160GB SATA drives. I had intended to use an AMS 5 disk in 3 5.25" bay hot-swap backplane. http://www.american-media.com/product/backplane/sata300/sata300.html I priced

First, it fails because the destination directory doesn''t exist. Then it fails because it DOES exist. I really expected one of those to work. So, what am I confused about now? (Running 2008.11) # zpool import -R /backups/bup-ruin bup-ruin # zfs send -R "zp1 at bup-20090222-054457UTC" | zfs receive -dv bup-ruin/fsfs/zp1" cannot receive: specified fs (bup-ruin/fsfs/zp1)

If I type "xm console 6", say (when I have a virtual machine 6 running), what should I get? The documentation seems to indicate that I should get something that behaves like a telnet to a serial console. What I actually get is a connection that might show me a couple of lines of output that do look like they belonged on the console, but doesn't seem to accept any input (except that

I'm installing Centos 5.5 on a new Dell R301 server. I wanted to run Xen and have the full virtualization possibilities (this is our development support server, so it runs a few real services and is available for playing with things; putting the "playing with things" functions into virtual servers would protect the "few real services", and make it easier to clean up

My current home fileserver (running Open Solaris 111b and ZFS) has an ASUS M2N-SLI DELUXE motherboard. This has 6 SATA connections, which are currently all in use (mirrored pair of 80GB for system zfs pool, two mirrors of 400GB both in my data pool). I''ve got two more hot-swap drive bays. And I''m getting up towards 90% full on the data pool. So, it''s time to expand,

If I can log in to the guest through the console, I can of course find out what IP DHCP has assigned it. If I configure a static IP I can of course connect to the system there (if it runs services, the firewall allows it, all the usual caveats). Does there happen to be any way to determine from dom0 what IPs are participating in the network and which guests they belong to? (I'm configuring

I built a fileserver on solaris 10u6 (10/08) intending to back it up to another server via zfs send | ssh othermachine ''zfs receive'' However, the new server is too new for 10u6 (10/08) and requires a later version of solaris . presently available is 10u8 (10/09) Is it crazy for me to try the send/receive with these two different versions of OSes? Is it possible the

Hi, I have a small question about the depth of scrub in a raidz/2/3 configuration. I''m quite sure scrub does not check spares or unused areas of the disks (it could check if the disks detects any errors there). But what about the parity? Obviously it has to be checked, but I can''t find any indications for it in the literature. The man page only states that the data is being

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

I''ve lucked into some big disks, so I''m thinking of biting the bullet (screaming loudly in the process) and superceding the SATA controllers on my motherboard with something that will work with hot-swap in Solaris. (did I mention before I''m still pissed about this?) I have enough to populate all 8 bays (meaning adding 4 disks to what I have now), so the 6 ports on the

My full backup script errorred out the last two times I ran it. I''ve got a full Bash trace of it, so I know exactly what was done. There are a moderate number of snapshots on the zp1 pool, and I''m intending to replicate the whole thing into the backup pool. After housekeeping, I take make a current snapshot on the data pool (zp1). Since this is a new full backup, I then

Using Centos 5.2 with Xen. I'm making a group of nodes behind an LVS load-director to perform computing services. Those nodes are only accessible from the LVS nodes (I'm using LVS NAT mode). Actually it's Xen virtual servers on the physical nodes behind the LVS boxes that I'm mostly concerned with. When you create a guest with virt-install, there's a vnc param and a vncport

I''m building another 24-bay rackmount storage server, and I''m considering what drives to put in the bays. My chassis is a Supermicro SC846A, so the backplane supports SAS or SATA; my controllers are LSI3081E, again supporting SAS or SATA. Looking at drives, Seagate offers an enterprise (Constellation) 2TB 7200RPM drive in both SAS and SATA configurations; the SAS model offers

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

I know i''m probably doing something REALLY stupid.....but for some reason i can''t get send/recv to work over ssh. I just built a new media server and i''d like to move a few filesystem from my old server to my new server but for some reason i keep getting strange errors... At first i''d see something like this: pfexec: can''t get real path of

I've got a Centos guest and a Windows 2003 server guest running in Xen under Centos (5.2 in both cases), and they can get out to the network, and I can ping them from dom0. This is my first Xen install, and I haven't used Linux as a router before (I'm very familiar with it as a webserver and development platform) so I'm a bit weak on the bridging code and NAT / IP masquerading.

As by the time, I've learned that Linux works by caching apps by using a lot of RAM and then it reallocates the new stuff by cleaning the old cached pages from memory as compared to other OSs. With 2 gigs of RAM often I see the free memory only as 100-400MB. Using TOP or PS, it doesn't look like any program or process is using excessive memory (the highest process is seen with 1-2% total

I added these rules to IPTABLES to slow brute force attacks. iptables -A INPUT -p tcp --dport 22 -s my_subnet/24 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -m state --state NEW -m recent --set --name SSH iptables -A INPUT -p tcp --dport 22 -m state --state NEW -m recent --update --seconds 60 --hitcount 5 --rttl --name SSH -j DROP I would like log entries when connections are dropped to see

My zfs filesystem hangs when transferring large filesystems (>500GB) with a couple dozen snapshots between servers using zfs send/receive with netcat. The transfer hangs about halfway through and is unkillable, freezing all IO to the filesystem, requiring a hard reboot. I have attempted this three times and failed every time. On the destination server I use: nc -l -p 8023 | zfs receive -vd sas

A) Resilver = Defrag. True/false? B) If I buy larger drives and resilver, does defrag happen? C) Does zfs send zfs receive mean it will defrag? -- This message posted from opensolaris.org