similar to: zpool status keeps telling "resilvered"

Hi, I have Dell md1200 connected to two heads ( Dell R710 ). The heads have Perc H800 card and drives are configured in Raid0 ( Virtual Disk) in the RAID controller. One of the drives had crashed and is replaced by a spare. Resilvering was triggered but fails to complete due to drives going offline. I have to reboot the head ( R710) and drives comes online. This happened repeatedly when

After several days of trying to get a 1.5TB drive to resilver and it continually restarting, I eliminated all of the snapshot-taking facilities which were enabled and 2009-10-29.14:58:41 [internal pool scrub done txg:567780] complete=0 2009-10-29.14:58:41 [internal pool scrub txg:567780] func=1 mintxg=3 maxtxg=567354 2009-10-29.16:52:53 [internal pool scrub done txg:567999] complete=0

Hi all, I am running S11 on a Dell PE650. It has 5 zpools attached that are made out of 240 drives, connected via fibre. On thursday all of the sudden two out of three zpools on one FC channel showed numerous errors and one of them showed this: root at solaris11a:~# zpool status vsmPool01 pool: vsmPool01 state: SUSPENDED status: One or more devices is currently being resilvered. The pool

Hi all, I recently experienced a disk failure on my home server and observed checksum errors while resilvering the pool and on the first scrub after the resilver had completed. Now everything seems fine but I''m posting this to get help with calming my nerves and detect any possible future faults. Lets start with some specs. OSOL 2009.06 Intel SASUC8i (w LSI 1.30IT FW) Gigabyte

I know this topic has been discussed many times... but what the hell makes zpool resilvering so slow? I''m running OpenSolaris 2009.06. I have had a large number of problematic disks due to a bad production batch, leading me to resilver quite a few times, progressively replacing each disk as it dies (and now preemptively removing disks.) My complaint is that resilvering ends up

I''ve got a zpool that has 4 raidz2 vdevs each with 4 disks (750GB), plus 4 spares. At one point 2 disks failed (in different vdevs). The message in /var/adm/messages for the disks were ''device busy too long''. Then SMF printed this message: Nov 23 04:23:51 x.x.com EVENT-TIME: Fri Nov 23 04:23:51 EST 2007 Nov 23 04:23:51 x.x.com PLATFORM: Sun Fire X4200 M2, CSN:

Hi, I don''t have means to replicate this issue nor file a bug about it so I''d like your opinion about these issues or perhaps make bug report if necessary. In scenario where is say three raidz2 groups consisting several disks, two disks fail in different raidz-groups. You have degraded pool and two degraded raidz2 groups. Now, one replaces first disk and starts resilvering, it

Yesterday morning I awoke to alerts from my SAN that one of my OS disks was faulty, FMA said it was in hardware failure. By the time I got to work (1.5 hours after the email) ALL of my pools were in a degraded state, and "tank" my primary pool had kicked in two hot spares because it was so discombobulated. ------------------- EMAIL ------------------- List of faulty resources:

Hi list, Here''s my case : pool: mypool state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scrub: resilver in progress for 147h19m, 100.00% done, 0h0m to go config: NAME STATE READ WRITE CKSUM filerbackup13

I am curious why zpool status reports a pool to be in the DEGRADED state after a drive in a raidz2 vdev has been successfully replaced. In this particular case drive c0t6d0 was failing so I ran, zpool offline home/c0t6d0 zpool replace home c0t6d0 c8t1d0 and after the resilvering finished the pool reports a degraded state. Hopefully this is incorrect. At this point is the vdev in question now has

Just look at this. I thought all the restarting resilver bugs were fixed, but it looks like something odd is still happening at the start: Status immediately after starting resilver: # zpool status pool: rc-pool state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine

I have a zpool of five 1.5TB disks in raidz1. They are on c?t?d?p0 devices - using the full disk, not any slice or partition, because the pool was created in zfs-fuse in linux and no partition tables were ever created. (for the full saga of my move from that to opensolaris, anyone who missed out on the fun can read the thread http://www.mail-archive.com/zfs-discuss at opensolaris.org/msg34813.html

This might be a daft question, but is there any way to configure Solaris to notify us when a disk has finished resilvering? This message posted from opensolaris.org

Dear all Is there a way to stop a running scrub on a zfs pool? Same question applies to a running resilver. Both render our fileserver unusable due to massive CPU load so we''d like to postpone them. In the docs it says that resilvering and scrubbing survive a reboot, so I am not even sure if a reboot would stop scrubbing or resilvering. Any help greatly appreciated! Cheers, Thomas

Hello everyone, As one of the steps of improving my ZFS home fileserver (snv_134) I wanted to replace a 1TB disk with a newer one of the same vendor/model/size because this new one has 64MB cache vs. 16MB in the previous one. The removed disk will be use for backups, so I thought it''s better off to have a 64MB cache disk in the on-line pool than in the backup set sitting off-line all

I have a large (88-drive) zpool in which a drive was recently replaced. (The pool has a bunch of duff Toshiba MK2001TRKB drives -- never ever pay money for these! -- and I'm trying to replace them one by one before they fail completely.) The resilver on the first drive replacement has been taking much much too long, and currently it's stuck in this state: pool: export state: DEGRADED

When I booted my laptop up this morning it took much longer than normal and there was a lot of disk activity even after I logged in. A quick use of dtrace and iostat revealed that all the writes were to the zpool. I ran zpool status and found that the pool was resilvering. Strange thing is that while the pool is a mirror, one side of it is offline since it is on an external usb disk - which

Hello All I read this thread Resilver/scrub times? for a few minutes and I have recognize that I dont know the different between Resilvering and Scrubing. Shame on me. :-( I dont find some declarations in the man-pages and I know the command to start scrubing "zpool scrub tank" but what is the command to start resilver and what is the different? -- Best Regards Alexander Dezember, 20

Hello zfs-discuss, S10U4+patches, SPARC If I attach a disk to vdev in a pool to get mirrored configuration then during resilver zpool iostat 1 will report only reads being done from pool and basically no writes. If I do zpool iostat -v 1 then I can see it is writing to new device however on a pool and mirror/vdev level it is still reporting only reads. If during resilvering reads

Hello zfs-discuss, One of a disk started to behave strangely. Apr 11 16:07:42 thumper-9.srv sata: [ID 801593 kern.notice] NOTICE: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1: Apr 11 16:07:42 thumper-9.srv port 6: device reset Apr 11 16:07:42 thumper-9.srv scsi: [ID 107833 kern.warning] WARNING: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1/disk at 6,0 (sd27): Apr 11 16:07:42 thumper-9.srv