similar to: mirrored drive

Hi All, I had a slice with zfs file system which I want to mirror, I followed the procedure mentioned in the amin guide I am getting this error. Can you tell me what I did wrong? root # zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT export 254G 230K 254G 0% ONLINE - root # echo |format Searching for disks...done

I have a system that I''m trying to bring up with a mirrored rpool. I''m using DarkStar''s ZFS Root Mirror blog post as a guide (http://darkstar-solaris.blogspot.com/2008/09/zfs-root-mirror.html). When I get to step 3 I execute: pfexec prtvtoc /dev/rdsk/c7d0s2 | fmthard -s - /dev/rdsk/c7d1s2 I get: fmthard: Cannot open device /dev/rdsk/c7d1s2 - Permission denied Any

Ciao, the rot filesystem of my thumper is a ZFS with a single disk: bash-3.2# zpool status rpool pool: rpool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c5t0d0s0 ONLINE 0 0 0 spares c0t7d0 AVAIL c1t6d0 AVAIL c1t7d0

In my new oracle server, sol11exp, it''s using multipath device names... Presently I have two disks attached: (I removed the other 10 disks for now, because these device names are so confusing. This way I can focus on *just* the OS disks.) 0. c0t5000C5003424396Bd0 <SEAGATE-ST32000SSSUN2.0-0514 cyl 3260 alt 2 hd 255 sec 252> /scsi_vhci/disk at g5000c5003424396b

On Solaris 10 If I install using ZFS root on only one drive is there a way to add another drive as a mirror later? Sorry if this was discussed already. I searched the archives and couldn''t find the answer. Thank you.

hi all, i would like to ask some questions regarding best practices for zfs recovery if disk errors occur. currently i have zfs boot (nv62) and the following setup: 2 si3224 controllers (each 4 sata disks) 8 sata disks, same size, same type i have two pools: a) rootpool b) datapool the rootpool is a mirrored pool, where every disk has a slice (the s0, which is 5 % of the whole disk) and this

I''m attempting to expand a root pool for a VMware VM that is on an 8GB virtual disk. I mirrored it to a 20GB disk and detached the 8GB disk. I did "installgrub" to install grub onto the second virtual disk, but I get a kernel panic when booting. Is there an extra step I need to perform to get this working? Basically I did this: 1. Created a new 20GB virtual disk. 2. Booted

(for some reason I cannot find my original thread..so I''m reposting it) I am trying to move my data off of a 40gb 3.5" drive to a 40gb 2.5" drive. This is in a Netra running Solaris 10. Originally what I did was: zpool attach -f rpool c0t0d0 c0t2d0. Then I did an installboot on c0t2d0s0. Didnt work. I was not able to boot from my second drive (c0t2d0). I cannot remember

Hi! i just downloaded 20010510 sources, compiled and installed it on my RedHat 7.1 linux box. I have several vfat (fat32) and linux (ext2) partitions on my pc ( i also have a windows98 installation). I have configured the fat32 parrtition like: [Drive E] "Path" = "/deposito" "Type" = "hd" "Filesystem" = "vfat" and the ext2 like:

Hi, I''m running FreeBSD 7.1-PRERELEASE with a 500-gig ZFS drive. Recently I''ve encountered a FreeBSD problem (PR kern/128083) and decided about updating the motherboard BIOS. It looked like the update went right but after that I was shocked to see my ZFS destroyed! Rolling the BIOS back did not help. Now it looks like that: # zpool status pool: tank state: UNAVAIL status:

Hi, We have a number of 4200''s setup using a combination of an SVM 4 way mirror and a ZFS raidz stripe. Each disk (of 4) is divided up like this / 6GB UFS s0 Swap 8GB s1 /var 6GB UFS s3 Metadb 50MB UFS s4 /data 48GB ZFS s5 For SVM we do a 4 way mirror on /,swap, and /var So we have 3 SVM mirrors d0=root (sub mirrors d10, d20, d30, d40) d1=swap (sub mirrors d11, d21,d31,d41)

OK, I have managed to get software RAID 1 running on my wonderful Proliant server but now have two challenges: 1) Fresh after an OS install and reboot, the RAID array starts to do its stuff but straight away (as part of the boot messages) I am told that the second disk is 'not ready for command' and the system hangs as soon as resyncing starts. I think this is fixed by adding an hdparm

hello, all I am have constraint disk space (only 8GB) while running os inside vm. Now i want to add more. It is easy to add for vm but how can i update fs in os? I cannot use autoexpand because it doesn''t implemented in my system: $ uname -a SunOS sopen 5.11 snv_111b i86pc i386 i86pc If it was 171 it would be grate, right? Doing following: o added new virtual HDD (it becomes

Hello, Due to a power outage our file server running FreeBSD 8.0p2 will no longer come up due to zpool corruption. I get the following output when trying to import the ZFS pool using either a FreeBSD 8.0p2 cd or the latest OpenSolaris snv_143 cd: FreeBSD mfsbsd 8.0-RELEASE-p2.vx.sk:/usr/obj/usr/src/sys/GENERIC amd64 mfsbsd# zpool import pool: tank id: 1998957762692994918 state: FAULTED

http://defect.opensolaris.org/bz/show_bug.cgi?id=971 Summary: zfs key -l fails after unloading (keyscope=dataset) Classification: Development Product: zfs-crypto Version: unspecified Platform: Other OS/Version: Solaris Status: NEW Severity: major Priority: P2 Component: other AssignedTo:

Sorry for the long post but I know trying to decide on hardware often want to see details about what people are using. I have the following AS-2022G-URF machine running OpenGaryIndiana[1] that I am starting to use. I successfully transferred a deduped zpool with 1.x TB of files and 60 or so zfs filesystems using mbuffer from an old 134 system with 6 drives - it ran at about 50MB/s or

Not sure what the best list to send this to is right now, so I have selected a few, apologies in advance. A couple questions. First I have a physical host (call him bob) that was just installed with b134 a few days ago. I upgraded to b145 using the instructions on the Illumos wiki yesterday. The pool has been upgraded (27) and the zfs file systems have been upgraded (5). chris at bob:~# zpool

Not sure what the best list to send this to is right now, so I have selected a few, apologies in advance. A couple questions. First I have a physical host (call him bob) that was just installed with b134 a few days ago. I upgraded to b145 using the instructions on the Illumos wiki yesterday. The pool has been upgraded (27) and the zfs file systems have been upgraded (5). chris at bob:~# zpool

Well this is a new one.... Illumos/Openindiana let me add a device as a hot spare that evidently has a different sector alignment than all of the other drives in the array. So now I''m at the point that I /need/ a hot spare and it doesn''t look like I have it. And, worse, the other spares I have are all the same model as said hot spare. Is there anything I can do with this or

After a liveupgrade and luactivate I can login to the -new- BE. My question is: do I have to luactive the -old- BE again if I want to chose that one from the grub menu or can I just run it if I want to. -- Dick Hoogendijk -- PGP/GnuPG key: 01D2433D + http://nagual.nl/ | SunOS sxce snv107 ++ + All that''s really worth doing is what we do for others (Lewis Carrol)