similar to: WarpDrive SLP-300

Hello, I am curious to know if there is an easy way to guess or identify the device names of disks. Previously the /dev/dsk/c0t0d0s0 system made sense to me... I had a SATA controller card with 8 ports, and they showed up with the numbers 1-8 in the "t" position of the device name. But I just built a new system with two LSI SAS HBAs in it, and my device names are along the lines of:

Greetings, We''re trying out a new JBOD here. Multipath (mpxio) is not working, and we could use some feedback and/or troubleshooting advice. The OS is oi151a7, running on an existing server with a 54TB pool of internal drives. I believe the server hardware is not relevant to the JBOD issue, although the internal drives do appear to the OS with multipath device names (despite the fact

Hi all, from much of the documentation I''ve seen, the advice is to set readonly=on on volumes on the receiving side during send/receive operations. Is this still a requirement? I''ve been trying the send/receive while NOT setting the receiver to readonly and haven''t seen any problems even though we''re traversing and ls''ing the dirs within the receiving

I know that this has been well-discussed already, but it''s been a few months - WD caviars with mpt/mpt_sas generating lots of retryable read errors, spitting out lots of beloved " Log info 31080000 received for target" messages, and just generally not working right. (SM 836EL1 and 836TQ chassis - though I have several variations on theme depending on date of purchase: 836EL2s,

On Fri, 28 Oct 2016 18:50, Alessandro Baggi wrote: > Il 28/10/2016 16:28, Valeri Galtsev ha scritto: >> On Fri, October 28, 2016 2:42 am, Alessandro Baggi wrote: >> > Il 27/10/2016 19:38, Yamaban ha scritto: >> > > For my personal use I would replace that Drive asap. >> > > - There is no warranty for it anymore (time since buy) >> > > -

Hi all, is anyone on this list who dares/dared to store his index files on a MLC-SSD? Regards, Patrick

Hi, I don''t know if it''s already been discussed here, but while thinking about using the OCZ Vertex 2 Pro SSD (which according to spec page has supercaps built in) as a shared slog and L2ARC device it stroke me that this might not be a such a good idea. Because this SSD is MLC based, write cycles are an issue here, though I can''t find any number in their spec. Why do I

Bfu 91 to 92 looks good Proceed with xVM upgrade . After running:- # sunos.hg/bin/build-all nondebug bash-3.2# cd packages-nondebug bash-3.2# pwd /usr/tmp/packages-nondebug bash-3.2# ls -l total 20 drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirt drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirtr drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWurlgrabber

Are any of you using the Intel 320 as ZIL? It''s MLC based, but I understand its wear and performance characteristics can be bumped up significantly by increasing the overprovisioning to 20% (dropping usable capacity to 80%). Anyone have experience with this? Ray

This appears to be a feature :-) I'm running rsync 2.5.5 on Solaris 8, and testing transferring files between two boxes with permission preservation turned *off*. I have three files: 700 with permissions 700 770 with permissions 770 777 with permissions 770 The umask for the target system is set to: 007 [I have checked this via prints from the rsync code] When the files get transferred,

Hi all; We have a Solaris 10 U9 x86 instance running on Silicon Mechanics / SuperMicro hardware. Occasionally under high load (ZFS scrub for example), the box becomes non-responsive (it continues to respond to ping but nothing else works -- not even the local console). Our only solution is to hard reset after which everything comes up normally. Logs are showing the following: Jan 8

Hi all, I have faced yet another kernel panic that seems to be related to mpt driver. This time i was trying to add a new disk to a running system (snv_134) and this new disk was not being detected...following a tip i ran the lsitool to reset the bus and this lead to a system panic. MPT driver : BAD TRAP: type=e (#pf Page fault) rp=ffffff001fc98020 addr=4 occurred in module "mpt" due

On Fri, October 28, 2016 2:42 am, Alessandro Baggi wrote: > Il 27/10/2016 19:38, Yamaban ha scritto: >> For my personal use I would replace that Drive asap. >> - There is no warranty for it anymore (time since buy) >> - You can't buy it new anymore (discontinued) >> - There are more reliable drives available. >> >> I'd go for a Samsung Evo 850, that

hello, all I am have constraint disk space (only 8GB) while running os inside vm. Now i want to add more. It is easy to add for vm but how can i update fs in os? I cannot use autoexpand because it doesn''t implemented in my system: $ uname -a SunOS sopen 5.11 snv_111b i86pc i386 i86pc If it was 171 it would be grate, right? Doing following: o added new virtual HDD (it becomes

Here is what I have configured: T2000 with OBP 4.28.6 2008/05/23 12:07 with 2 - 72 GB disks as the root disks OpenSolaris Nevada Build 91 Solaris Express Community Edition snv_91 SPARC Copyright 2008 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 03 June 2008

The standard controller that has been recommended in the past is the AOC-SAT2-MV8 - an 8 port with a marvel chipset. There have been several mentions of LSI based controllers on the mailing lists and I''m wondering about them. One obvious difference is that the Marvel contoller is PCI-X and the LSI controllers are PCI-E. Supermicro have several LSI controllers. AOC-USASLP-L8i with the

I''m a newbie as dtrace, but couldn''t find an answer to this by searching : For example, I have function "lsearch" which is called in many different places. It''s also called by "composemessage". I have been able to successfully create a script which show the return values of "lsearch". Now what I would like to do, is for it to only show the

Not sure where to put this but I am cc''ing the ZFS - discussion board. I was successfull in creating iscsi shares using ZFS set shareiscsi=on with 2 thin provisioned partitions of 1TB each (zfs create -s -V 1tb idrive/d1). Access to the shares with an iscsi initiator was successful, all was smooth, until the reboot. Upon reboot, the console reports the following errors. WARNING:

Anyone have any experience with a R510 with the PERC H200/H700 controller with ZFS? My perception is that Dell doesn''t play well with OpenSolaris. Thanks, Geoff

Dear All, It may be this not the correct mailing list, but I''m having a ZFS issue when a disk is failing. The system is a supermicro motherboard X8DTH-6F in a 4U chassis (SC847E1-R1400LPB) and an external SAS2 JBOD (SC847E16-RJBOD1). It makes a system with a total of 4 backplanes (2x SAS + 2x SAS2) each of them connected to a 4 different HBA (2x LSI 3081E-R (1068 chip) + 2x LSI