similar to: Apparent SAS HBA failure-- now what?

If I want to use a batch of new Seagate 3TB Barracudas with Solaris 11, will zpool let me create a new pool with ashift=12 out of the box or will I need to play around with a patched zpool binary (or the iSCSI loopback)? -- Dave Pooser Manager of Information Services Alford Media http://www.alfordmedia.com

I currently am getting good speeds out of my existing system (8x 2TB in a RAIDZ2 exported over fibre channel) but there''s no such thing as too much speed, and these other two drive bays are just begging for drives in them.... If I go to 10x 2TB in a RAIDZ3, will the extra spindles increase speed, or will the extra parity writes reduce speed, or will the two factors offset and leave things

I''m building another 24-bay rackmount storage server, and I''m considering what drives to put in the bays. My chassis is a Supermicro SC846A, so the backplane supports SAS or SATA; my controllers are LSI3081E, again supporting SAS or SATA. Looking at drives, Seagate offers an enterprise (Constellation) 2TB 7200RPM drive in both SAS and SATA configurations; the SAS model offers

Hi I''m running OpenSolaris 148 on a few boxes, and newer boxes are getting installed as we speak. What would you suggest for a good SLOG device? It seems some new PCI-E-based ones are hitting the market, but will those require special drivers? Cost is obviously alsoo an issue here.... Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net

Anyone here using http://www.sonnettech.com/product/tempossd.html with a zfs-capable OS? Is e.g. OpenIndiana supported? Thanks.

Well this is a new one.... Illumos/Openindiana let me add a device as a hot spare that evidently has a different sector alignment than all of the other drives in the array. So now I''m at the point that I /need/ a hot spare and it doesn''t look like I have it. And, worse, the other spares I have are all the same model as said hot spare. Is there anything I can do with this or

Hi all I have a test system with snv134 and 8x2TB drives in RAIDz2 and currently no Zil or L2ARC. I noticed the I/O speed to NFS shares on the testpool drops to something hardly usable while scrubbing the pool. How can I address this? Will adding Zil or L2ARC help? Is it possible to tune down scrub''s priority somehow? Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at

Hi, I am trying to create a 10 drive raid6 array. OS is Centos 5.3 (64 Bit) All 10 drives are 2T in size. device sd{a,b,c,d,e,f} are on my motherboard device sd{i,j,k,l} are on a pci express areca card (relevant lspci info below) #lspci 06:0e.0 RAID bus controller: Areca Technology Corp. ARC-1210 4-Port PCI-Express to SATA RAID Controller The controller is set to JBOD the drives. All

Somewhere, mdadm is cacheing information. Here is my /etc/mdadm.conf file: more /etc/mdadm.conf # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md0 level=raid1 num-devices=4 metadata=0.90 UUID=55ff58b2:0abb5bad:42911890:5950dfce ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=315eaf5c:776c85bd:5fa8189c:68a99382 ARRAY /dev/md2 level=raid1 num-devices=2

Which consumer-priced 1.5TB drives do people currently recommend? I had zero read/write/checksum errors so far in 2 years with my trusty old Western Digital WD7500AAKS drives, but now I want to upgrade to a new set of drives that are big, reliable and cheap. As of Jan 2010 it seems the price sweet spot is the 1.5TB drives. As I had a lot of success with Western Digital drives I thought I would

Hola a todos Estoy intentando extraer un subconjunto de datos de una serie temporal, concretamente quiero extraer los meses de verano de varios años pero no encuentro la manera. Los datos tienen este formato: FECHA;H_SOLAR;DIR_M;DIR_S;VEL_M;VEL_S;VEL_X;U;V;TEMP_M;HR;BAT;PRECIP;RAD;UVA;UVB;FOG;GRID;

I'm using the latest CVS source under Linux using a playlist of ogg files. When I use a client to connect on the same machine, there is not any disconnect (xmms and zinf). When using a client on a Windows machine, I get mixed results. Zinf on windows will play thru the current song but then stops when the song is finished and does not play the next song being streamed (see log below).

Hiya, Is there any reason (and anything to worry about) if disk target IDs don''t start at 0 (zero). For some reason mine are like this (3 controllers - 1 onboard and 2 PCIe); AVAILABLE DISK SELECTIONS: 0. c8t0d0 <ATA -ST9160314AS -SDM1 cyl 19454 alt 2 hd 255 sec 63> /pci at 0,0/pci10de,cb84 at 5/disk at 0,0 1. c8t1d0 <ATA -ST9160314AS -SDM1

On 19/02/02 03:06, Jack Moffitt shaped the electrons to say: > > The point is, is this list related to icecast2 development? I made some > > changes to the server and sent a patch to Jack Moffitt, but I'm not sure > > he's still mainaining the server. > > You're in the right place, and I still maintain the server. I don't > remember your patch right

I am bumping this thread because I too have the same question ... can I put modern 3TB disks (hitachi deskstars) into an old x4500 ? If not, would the x4540 accept them ? -- This message posted from opensolaris.org

Hi, If I add an entire disk to a new pool by doing "zpool create", is this reversible? I.e. if there was data on that disk (e.g. it was the sole disk in a zpool in another system) can I get this back or is zpool create destructive? Joubert This message posted from opensolaris.org

Overnight I was running a zfs send | zfs receive (both within the same system / zpool). The system ran out of space, a drive went off line, and the system is degraded. This is a raidz2 array running on FreeBSD 8.1-STABLE #0: Sat Sep 18 23:43:48 EDT 2010. The following logs are also available at http://www.langille.org/tmp/zfs-space.txt <- no line wrapping This is what was running: #

Hi!We''re trying to pinpoint our performance issues and we could use all the help to community can provide. We''re running the latest version of Nexenta on a pretty powerful machine (4x Xeon 7550, 256GB RAM, 12x 100GB Samsung SSDs for the cache, 50GB Samsung SSD for the ZIL, 10GbE on a dedicated switch, 11x pairs of 15K HDDs for the pool). We''re connecting a single Linux

Hi there, I?m using icecast 2.0.1 with darkice 0.14 streaming an 192kb mp3 stream. Everything seems to work fine except that clients (eg winamp5) disconnect after a period of time (5/10/20 minutes). The icecast log shows some weir errors: [2004-08-18? 01:24:54] DBUG format-mp3/format_mp3_write_buf_to_client Client had recoverable error -1 [2004-08-18? 01:24:54] DBUG

Greetings, Quick question: I am about to acquire some disks for use with ZFS (currently using zfs-fuse v0.7.0). I''m aware of some 4k alignment issues with Western Digital advanced format disks. As far as I can tell, the Hitachi Deskstar 7K3000 (HDS723030ALA640) uses 512B sectors and so I presume does not suffer from such issues (because it doesn''t lie about the physical layout