similar to: SSD partitioned into multiple L2ARC read cache

Are there any drawbacks to partition a SSD in two parts and use L2ARC on one partition, and ZIL on the other? Any thoughts? -- This message posted from opensolaris.org

I have an Intel X25-M 80GB SSD. For optimum performance, I need to block align the SSD device, but I am not sure exactly how I should to it. If I run the format -> fdisk it allows me to partition based on a cylinder, but I don''t think that is sufficient enough. Can someone tell me how they block aligned an SSD device for use in l2arc. Thanks, Geoff

Hi, I''ve ordered a new server with: - 4x600GB Toshiba 10K SAS2 Disks - 2x100GB OCZ DENEVA 2R SYNC eMLC SATA (no expander so I hope no SAS/ SATA problems). Specs: http://www.oczenterprise.com/ssd-products/deneva-2-r-sata-6g-2.5-emlc.html I want to use the 2 OCZ SSDs as mirrored intent log devices, but as the intent log needs quite a small amount of the disks (10GB?), I was wondering

Hi, I don''t know if it''s already been discussed here, but while thinking about using the OCZ Vertex 2 Pro SSD (which according to spec page has supercaps built in) as a shared slog and L2ARC device it stroke me that this might not be a such a good idea. Because this SSD is MLC based, write cycles are an issue here, though I can''t find any number in their spec. Why do I

Hi, Out of pure curiosity, I was wondering, what would happen if one tries to use a regular 7200RPM (or 10K) drive as slog or L2ARC (or both)? I know these are designed with SSDs in mind, and I know it''s possible to use anything you want as cache. So would ZFS benefit from it? Would it be the same? Would it slow down? I guess it would slow things down, because it would be trying to

Hi, as Richard Elling wrote earlier: "For more background, low-cost SSDs intended for the boot market are perfect candidates. Take a X-25V @ 40GB and use 15-20 GB for root and the rest for an L2ARC. For small form factor machines or machines with max capacity of 8GB of RAM (a typical home system) this can make a pleasant improvement over a HDD-only implementation." For the upcoming

I have some questions about the choice of SSDs to use for ZIL and L2ARC. I''m trying to build an OpenSolaris iSCSI SAN out of a whitebox system, which is intended to be used as a backup SAN during storage migration, so it''s built on a tight budget. The system currently has 4GB RAM, 3GHz Core2-Quad and 8x 500GB WD REII SATA HDDs attached to an Areca 8port ARC-1220 controller

Hello all, A few months ago I saw a statement that L2ARC writes are simplistic in nature, and I got the (mis?)understanding that some sort of ring buffer may be in use, like for ZIL. Is this true, and the only metric of write-performance important for L2ARC SSD device is the sequential write bandwidth (and IOPS)? In particular, there are some SD/MMC/CF cards for professional photography and

I''m running a mirrored pair of 2 TB SATA drives as my data storage drives on my home workstation, a Core i7-based machine with 10 GB of RAM. I recently added a sandforce-based 60 GB SSD (OCZ Vertex 2, NOT the pro version) as an L2ARC to the single mirrored pair. I''m running B134, with ZFS pool version 22, with dedup enabled. If I understand correctly, the dedup table should be in

We are looking into the possibility of adding a dedicated ZIL and/or L2ARC devices to our pool. We are looking into getting 4 ? 32GB Intel X25-E SSD drives. Would this be a good solution to slow write speeds? We are currently sharing out different slices of the pool to windows servers using comstar and fibrechannel. We are currently getting around 300MB/sec performance with 70-100% disk busy.

Hi, When deploying ZFS in cluster environment it would be nice to be able to have some SSDs as local drives (not on SAN) and when pool switches over to the other node zfs would pick up the node''s local disk drives as L2ARC. To better clarify what I mean lets assume there is a 2-node cluster with 1sx 2540 disk array. Now lets put 4x SSDs in each node (as internal/local drives). Now

Greeting All I have create a pool that consists oh a hard disk and a ssd as a cache zpool create hdd c11t0d0p3 zpool add hdd cache c8t0d0p0 - cache device I ran an OLTP bench mark to emulate a DMBS One I ran the benchmark, the pool started create the database file on the ssd cache device ??????????? can any one explain why this happening ? is not L2ARC is used to absorb the evicted data

Hi all, just after sending a message to sunmanagers I realized that my question should rather have gone here. So sunmanagers please excus ethe double post: I have inherited a X4140 (8 SAS slots) and have just setup the system with Solaris 10 09. I first setup the system on a mirrored pool over the first two disks pool: rpool state: ONLINE scrub: none requested config: NAME

Hi all I ran a workload that reads & writes within 10 files each file is 256M, ie, (10 * 256M = 2.5GB total Dataset Size). I have set the ARC max size to 1 GB on etc/system file In the worse case, let us assume that the whole dataset is hot, meaning my workingset size= 2.5GB My SSD flash size = 8GB and being used for L2ARC No slog is used in the pool My File system record size = 8K ,

I have three zpools on a server and want to add a mirrored pair of ssd''s for the ZIL. Can the same pair of SSDs be used for the ZIL of all three zpools or is it one ZIL SLOG device per zpool? -- This message posted from opensolaris.org

Hi folks, I would appreciate it if someone can help me understand some weird results I''m seeing with trying to do performance testing with an SSD offloaded ZIL. I''m attempting to improve my infrastructure''s burstable write capacity (ZFS based WebDav servers), and naturally I''m looking at implementing SSD based ZIL devices. I have a test machine with the

Will btrfs in the future implement a read cache like zfs has with l2arc, following it''s hybrid storage concept. This would take away the hassle of choosing what and what not should be on your SSD, it would speed up the things you do most. And not what you did a lot a week ago. It should be persistent between boots so your boot sequence would benefit too. I''m sorry if this

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

Hello, I am setting up a new (remote) server. I initially installed 9.2 RC4 amd64 because that's what the data center put in the drive for me. Shortly thereafter I downloaded 9.2-STABLE sources and compiled world and a generic kernel. While doing so the system became unreachable by SSH The SSH sessions appeared to connect but there was never any data returned. I could telnet to port 22

I created a zfs pool with dedup with the following settings: zpool create data c8t1d0 zfs create data/shared zfs set dedup=on data/shared The thing I was wondering about was it seems like ZFS only dedup at the file level and not the block. When I make multiple copies of a file to the store I see an increase in the deup ratio, but when I copy similar files the ratio stays at 1.00x. -- This