similar to: block align SSD for use as a l2arc cache

Are there any drawbacks to partition a SSD in two parts and use L2ARC on one partition, and ZIL on the other? Any thoughts? -- This message posted from opensolaris.org

Hi, I don''t know if it''s already been discussed here, but while thinking about using the OCZ Vertex 2 Pro SSD (which according to spec page has supercaps built in) as a shared slog and L2ARC device it stroke me that this might not be a such a good idea. Because this SSD is MLC based, write cycles are an issue here, though I can''t find any number in their spec. Why do I

We are looking into the possibility of adding a dedicated ZIL and/or L2ARC devices to our pool. We are looking into getting 4 ? 32GB Intel X25-E SSD drives. Would this be a good solution to slow write speeds? We are currently sharing out different slices of the pool to windows servers using comstar and fibrechannel. We are currently getting around 300MB/sec performance with 70-100% disk busy.

Hi, as Richard Elling wrote earlier: "For more background, low-cost SSDs intended for the boot market are perfect candidates. Take a X-25V @ 40GB and use 15-20 GB for root and the rest for an L2ARC. For small form factor machines or machines with max capacity of 8GB of RAM (a typical home system) this can make a pleasant improvement over a HDD-only implementation." For the upcoming

What would the performance impact be of splitting up a 64 GB SSD into four partitions of 16 GB each versus having the entire SSD dedicated to each pool? Scenario A: 2 TB Mirror w/ 16 GB read cache partition 2 TB Mirror w/ 16 GB read cache partition 2 TB Mirror w/ 16 GB read cache partition 2 TB Mirror w/ 16 GB read cache partition versus Scenario B: 2 TB Mirror w/ 64 GB read cache SSD 2 TB

Hi, I''ve ordered a new server with: - 4x600GB Toshiba 10K SAS2 Disks - 2x100GB OCZ DENEVA 2R SYNC eMLC SATA (no expander so I hope no SAS/ SATA problems). Specs: http://www.oczenterprise.com/ssd-products/deneva-2-r-sata-6g-2.5-emlc.html I want to use the 2 OCZ SSDs as mirrored intent log devices, but as the intent log needs quite a small amount of the disks (10GB?), I was wondering

I have some questions about the choice of SSDs to use for ZIL and L2ARC. I''m trying to build an OpenSolaris iSCSI SAN out of a whitebox system, which is intended to be used as a backup SAN during storage migration, so it''s built on a tight budget. The system currently has 4GB RAM, 3GHz Core2-Quad and 8x 500GB WD REII SATA HDDs attached to an Areca 8port ARC-1220 controller

Hi, Out of pure curiosity, I was wondering, what would happen if one tries to use a regular 7200RPM (or 10K) drive as slog or L2ARC (or both)? I know these are designed with SSDs in mind, and I know it''s possible to use anything you want as cache. So would ZFS benefit from it? Would it be the same? Would it slow down? I guess it would slow things down, because it would be trying to

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

Hi, When deploying ZFS in cluster environment it would be nice to be able to have some SSDs as local drives (not on SAN) and when pool switches over to the other node zfs would pick up the node''s local disk drives as L2ARC. To better clarify what I mean lets assume there is a 2-node cluster with 1sx 2540 disk array. Now lets put 4x SSDs in each node (as internal/local drives). Now

Hi folks, I would appreciate it if someone can help me understand some weird results I''m seeing with trying to do performance testing with an SSD offloaded ZIL. I''m attempting to improve my infrastructure''s burstable write capacity (ZFS based WebDav servers), and naturally I''m looking at implementing SSD based ZIL devices. I have a test machine with the

We have a SunFire X4500 running Solaris 10U5 which does about 5-8k nfs ops of which about 90% are meta data. In hind sight it would have been significantly better to use a mirrored configuration but we opted for 4 x (9+2) raidz2 at the time. We can not take the downtime necessary to change the zpool configuration. We need to improve the meta data performance with little to no money. Does anyone

Anyone have any experience with a R510 with the PERC H200/H700 controller with ZFS? My perception is that Dell doesn''t play well with OpenSolaris. Thanks, Geoff

Hello, How do you tell how much of your l2arc is populated? I''ve been looking for a while now, can''t seem to find it. Must be easy, as this blog entry shows it over time: http://blogs.sun.com/brendan/entry/l2arc_screenshots And follow up, can you tell how much of each data set is in the arc or l2arc? -- This message posted from opensolaris.org

Hello all, A few months ago I saw a statement that L2ARC writes are simplistic in nature, and I got the (mis?)understanding that some sort of ring buffer may be in use, like for ZIL. Is this true, and the only metric of write-performance important for L2ARC SSD device is the sequential write bandwidth (and IOPS)? In particular, there are some SD/MMC/CF cards for professional photography and

I''m running a mirrored pair of 2 TB SATA drives as my data storage drives on my home workstation, a Core i7-based machine with 10 GB of RAM. I recently added a sandforce-based 60 GB SSD (OCZ Vertex 2, NOT the pro version) as an L2ARC to the single mirrored pair. I''m running B134, with ZFS pool version 22, with dedup enabled. If I understand correctly, the dedup table should be in

Greeting ALL I understand that L2ARC is still under enhancement. Does any one know if ZFS can be upgrades to include "Persistent L2ARC", ie. L2ARC will not loose its contents after system reboot ? -- Abdullah Al-Dahlawi George Washington University Department. Of Electrical & Computer Engineering ---- Check The Fastest 500 Super Computers Worldwide

Hi, I was suffering for weeks from the following problem: a zfs dataset contained an automatic snapshot (monthly) that used 2.8 TB of data. The dataset was deprecated, so I chose to destroy it after I had deleted some files; eventually it was completely blank besides the snapshot that still locked 2.8 TB on the pool. ''zfs destroy -r pool/dataset'' hung the machine within seconds

I''m migrating to ZFS and Solaris for cluster computing storage, and have some completely static data sets that need to be as fast as possible. One of the scenarios I''m testing is the addition of vdevs to a pool. Starting out, I populated a pool that had 4 vdevs. Then, I added 3 more vdevs and would like to balance this data across the pool for performance. The data may be

Hi all I ran a workload that reads & writes within 10 files each file is 256M, ie, (10 * 256M = 2.5GB total Dataset Size). I have set the ARC max size to 1 GB on etc/system file In the worse case, let us assume that the whole dataset is hot, meaning my workingset size= 2.5GB My SSD flash size = 8GB and being used for L2ARC No slog is used in the pool My File system record size = 8K ,