similar to: questions about zil

Now the test for the Vertex 2 Pro. This was fun. For more explanation please see the thread "Crucial RealSSD C300 and cache flush?" This time I made sure the device is attached via 3GBit SATA. This is also only a short test. I''ll retest after some weeks of usage. cache enabled, 32 buffers, 64k blocks linear write, random data: 96 MB/s linear read, random data: 206 MB/s linear

I have a 24 x 1TB system being used as an NFS file server. Seagate SAS disks connected via an LSI 9211-8i SAS controller, disk layout 2 x 11 disk RAIDZ2 + 2 spares. I am using 2 x DDR Drive X1s as the ZIL. When we write anything to it, the writes are always very bursty like this: ool 488K 20.0T 0 0 0 0 xpool 488K 20.0T 0 0 0 0 xpool

Hi, I don''t know if it''s already been discussed here, but while thinking about using the OCZ Vertex 2 Pro SSD (which according to spec page has supercaps built in) as a shared slog and L2ARC device it stroke me that this might not be a such a good idea. Because this SSD is MLC based, write cycles are an issue here, though I can''t find any number in their spec. Why do I

Hi all, just after sending a message to sunmanagers I realized that my question should rather have gone here. So sunmanagers please excus ethe double post: I have inherited a X4140 (8 SAS slots) and have just setup the system with Solaris 10 09. I first setup the system on a mirrored pool over the first two disks pool: rpool state: ONLINE scrub: none requested config: NAME

Hello all, I am thinking about a new laptop. I see that there are a number of higher-performance models (incidenatlly, they are also marketed as "gamer" ones) which offer two SATA 2.5" bays and an SD flash card slot. Vendors usually position the two-HDD bay part as either "get lots of capacity with RAID0 over two HDDs, or get some capacity and some performance by mixing one

I''m working with a Cyrus IMAP server running on a T2000 box under Solaris 10 10/09 with current patches. Mailboxes reside on six ZFS filesystems, each containing about 200 gigabytes of data. These are part of a single zpool built on four Iscsi devices from our Netapp filer. One of these ZFS filesystems contains a number of global and per-user databases in addition to one sixth of the

For using SSDs: Are there any format/mount parameters that should be set for using btrfs on SSDs (other than the "ssd" mount option)? General questions: How long is the ''delay'' for the delayed alloc? Are file allocations aligned to 4kiB boundaries, or larger? What byte value is used to pad unused space? (Aside: For some, the erased state reads all 0x00, and for

Are there any drawbacks to partition a SSD in two parts and use L2ARC on one partition, and ZIL on the other? Any thoughts? -- This message posted from opensolaris.org

I''m running a mirrored pair of 2 TB SATA drives as my data storage drives on my home workstation, a Core i7-based machine with 10 GB of RAM. I recently added a sandforce-based 60 GB SSD (OCZ Vertex 2, NOT the pro version) as an L2ARC to the single mirrored pair. I''m running B134, with ZFS pool version 22, with dedup enabled. If I understand correctly, the dedup table should be in

I''ve got two recent examples of SSDs. Their pristine state from the manufacturer shows: Device Model: OCZ-VERTEX3 # hexdump -C /dev/sdd 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 1bf2976000 Device Model: OCZ VERTEX PLUS (OCZ VERTEX 2E) # hexdump -C /dev/sdd 00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| *

Hi, as I have learned from the discussion about which SSD to use as ZIL drives, I stumbled across this article, that discusses short stroking for increasing IOPs on SAS and SATA drives: http://www.tomshardware.com/reviews/short-stroking-hdd,2157.html Now, I am wondering if using a mirror of such 15k SAS drives would be a good-enough fit for a ZIL on a zpool that is mainly used for file

Hi, I''ve ordered a new server with: - 4x600GB Toshiba 10K SAS2 Disks - 2x100GB OCZ DENEVA 2R SYNC eMLC SATA (no expander so I hope no SAS/ SATA problems). Specs: http://www.oczenterprise.com/ssd-products/deneva-2-r-sata-6g-2.5-emlc.html I want to use the 2 OCZ SSDs as mirrored intent log devices, but as the intent log needs quite a small amount of the disks (10GB?), I was wondering

My google-fu is coming up short on this one... I didn''t see that it had been discussed in a while ... What is the status of ZFS support for TRIM? For the pool in general... and... Specifically for the slog and/or cache??? -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have some questions about the choice of SSDs to use for ZIL and L2ARC. I''m trying to build an OpenSolaris iSCSI SAN out of a whitebox system, which is intended to be used as a backup SAN during storage migration, so it''s built on a tight budget. The system currently has 4GB RAM, 3GHz Core2-Quad and 8x 500GB WD REII SATA HDDs attached to an Areca 8port ARC-1220 controller

Hi all, I currently have a OCZ Vertex 4 SSD as a ZIL device and am well aware of their exaggerated claims of sustained performance. I was thinking about getting a DRAM based ZIL accelerator such as Christopher George''s DDRDive, one of the STEC products, etc. Of course the key question i''m trying to answer is: is the price premium worth it? --- What is the (average/min/max)

Hello, Im about to migrate a 6Tb database from Veritas Volume Manager to ZFS, I want to set arc_max parameter so ZFS cant use all my system''s memory, but i dont know how much i should set, do you think 24Gb will be enough for a 6Tb database? obviously the more the better but i cant set too much memory. Have someone implemented succesfully something similar? We ran some test and the

Hi all, I have a home server based on SNV_127 with 8 disks; 2 x 500GB mirrored root pool 6 x 1TB raidz2 data pool This server performs a few functions; NFS : for several ''lab'' ESX virtual machines NFS : mythtv storage (videos, music, recordings etc) Samba : for home directories for all networked PCs I backup the important data to external USB hdd each day. I previously had

Hi, I''m looking to build a virtualized web hosting server environment accessing files on a hybrid storage SAN. I was looking at using the Sun X-Fire x4540 with the following configuration: - 6 RAID-Z vdevs with one hot spare each (all 500GB 7200RPM SATA drives) - 2 Intel X-25 32GB SSD''s as a mirrored ZIL - 4 Intel X-25 64GB SSD''s as the L2ARC. -

The standard controller that has been recommended in the past is the AOC-SAT2-MV8 - an 8 port with a marvel chipset. There have been several mentions of LSI based controllers on the mailing lists and I''m wondering about them. One obvious difference is that the Marvel contoller is PCI-X and the LSI controllers are PCI-E. Supermicro have several LSI controllers. AOC-USASLP-L8i with the

What would the performance impact be of splitting up a 64 GB SSD into four partitions of 16 GB each versus having the entire SSD dedicated to each pool? Scenario A: 2 TB Mirror w/ 16 GB read cache partition 2 TB Mirror w/ 16 GB read cache partition 2 TB Mirror w/ 16 GB read cache partition 2 TB Mirror w/ 16 GB read cache partition versus Scenario B: 2 TB Mirror w/ 64 GB read cache SSD 2 TB