similar to: Extremely slow raidz resilvering

Hi all, I recently experienced a disk failure on my home server and observed checksum errors while resilvering the pool and on the first scrub after the resilver had completed. Now everything seems fine but I''m posting this to get help with calming my nerves and detect any possible future faults. Lets start with some specs. OSOL 2009.06 Intel SASUC8i (w LSI 1.30IT FW) Gigabyte

Hardware Supermicro X7DAE (AHCI BIOS) dual Intel Woodcrest processors, 6 x Western Digital Raptor SATA drives. I have installed b62 running 64 bit succesfully on a PATA drive. The BIOS is configured to access the SATA drives in native mode using hte AHCI Bios. I have 6 SATA II drives accessed via the Solaris AHCI driver. I have created a ZFS file system across all 6 drives. This works fine until

Hello, I have been asked to take a look at at poll on a old OSOL 2009.06 host. It have been left unattended for a long time and it was found in a FAULTED state. Two of the disks in the raildz2 pool seems to have failed, one have been replaced by a spare, the other one is UNAVAIL. The machine was restarted and the damaged disks was removed to make it possible to access the pool without it hanging

Hi, In changeset 19130:c8962b24fb50, when using iommu=1, it goes into the hypervisor debugger. Why is this so? Thanks. -Alex _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Hi all, I'm a new user to LLVM. Not really sure if this is the correct place to post, since there isn't really any other forums around. Anyway, the issue I'm encountering is that, I was trying out the first tutorial (http://llvm.org/docs/tutorial/JITTutorial1.html). I attempted to do this in another folder that was copied from llvm/projects/sample. I created a new folder called

I have a chipset which supports VT-d (Intel X58) and, according to my motherboard manufacturers, VT-d is enabled in the BIOS and listed as "Intel VT." The problem is that xm dmesg shows "I/O virtualisation disabled" and I get this error message when I try to create a domU with a pci device assigned: ''Error: failed to assign device: maybe the platform doesn''t

Hey all, I''m not sure if this is a ZFS bug or a hardware issue I''m having - any pointers would be great! Following contents include: - high-level info about my system - my first thought to debugging this - stack trace - format output - zpool status output - dmesg output High-Level Info About My System --------------------------------------------- - fresh

On Sun, Sep 20, 2009 at 11:05 PM, Alexia Benington <alexbenington at gmail.com> wrote: > Hi all, > > I can get it to compile with the following command. But I want to make > sure I understand how the Makefiles integrate together. > g++ tut1.cpp `llvm-config --cxxflags --ldflags --libs core engine` > > Really appreciate your help. Thank you. I've been sitting on a

Hi all, I''ve been trying to understand the pci_setup function in hvmloader.c in Xen unstable. I''m kinda lost at Line 328. base = (resource->base + bar_sz - 1) & ~(bar_sz - 1) I''d appreciate if someone could explain to me why base is calculated this way. Specifically, I don''t understand the bitwise AND with the one''s complements of

Hi! I tried to add an other FiweFire Drive to my existing four devices but it turned out, that the OpenSolaris IEEE1394 support doen''t seem to be well-engineered. After not recognizing the new device and exporting and importing the existing zpool, I get this zpool status: pool: tank state: DEGRADED status: One or more devices could not be used because the label is missing or

I''m looking for a way to backup my entire system, the rpool zfs pool to an external HDD so that it can be recovered in full if the internal HDD fails. Previously with Solaris 10 using UFS I would use ufsdump and ufsrestore, which worked so well, I was very confident with it. Now ZFS doesn''t have an exact replacement of this so I need to find a best practice to replace it.

Hello, 1) On OpenIndiana 151, I configured nut 2.6.1 as configure --prefix=/opt/nut/2.6.1 --with-cgi --with-hal --with-user=ups --with-group=nut CC=cc The result is -e Configuration summary: ====================== build serial drivers: yes build USB drivers: yes build SNMP drivers: yes build neon based XML driver: yes build Powerman PDU client driver: no enable SSL development code: yes

On 5/5/10 1:44 AM, Christian Thalinger wrote: > On Tue, 2010-05-04 at 16:19 -0600, Evan Layton wrote: >> Can you try the following and see if it really thinks it''s an EFI lable? >> # dd if=/dev/dsk/c12t0d0s2 of=x skip=512 bs=1 count=10 >> # cat x >> >> This may help us determine if this is another instance of bug 6860320 > > # dd

This one happened today: Gentoo linux dom0, xen 3.2.0 hypervisor (32-bit), Intel Quad-core cpu, 8GB memory. This linux box / dom0 is up for 40 days. OpenSolaris SXCE snv_81 PV domU (32-bit) Problem: when starting the snv_81 domU, we''re stuck for more than 60 seconds early during bootstrap: v3.2.0 chgset ''unavailable'' SunOS Release 5.11 Version snv_81 32-bit

Hello all, I am trying to set up my brother's UPS (remotely over internet) on an OpenIndiana-based storage box. According to him, the UPS is probably an Ippon Back Power Pro 600 dated around 2003 (battery recently replaced), and it has an USB connection. Sorry for a relatively long post with a log of my successes and failures, in the hopes that someone would point out what I did wrong.

Hello dear R-helpers, I haven't been able to figure out of find a solution in the R-help archives about how to delete all the characters contained in groups of parenthesis. I have a vector that looks more or less like this: myvector<-c("something (80 km/h, sd) & more (6 kg/L,sd)", "somethingelse (48 m/s, sd) & moretoo (50g/L , sd)") I want to extract all

I figured the following ZFS ''success story'' may interest some readers here. I was interested to see how much sequential read/write performance it would be possible to obtain from ZFS running on commodity hardware with modern features such as PCI-E busses, SATA disks, well-designed SATA controllers (AHCI, SiI3132/SiI3124). So I made this experiment of building a fileserver by

On 11/9/2013 5:24 AM, Jim Klimov wrote: > Hello all, > > I am trying to set up my brother's UPS (remotely over internet) > on an OpenIndiana-based storage box. According to him, the UPS is > probably an Ippon Back Power Pro 600 dated around 2003 (battery > recently replaced), and it has an USB connection. > > Sorry for a relatively long post with a log of my successes

I'm sorry if this isn't the place to ask this question, but I was unable to find any other form of contact on the FLAC website. I'm trying to rip two CDs to FLAC, and want to use EAC, but the link to download the official FLAC tools is dead. Therefore, I'm unsure of what to download. Any help, please? -------------- next part -------------- An HTML attachment was scrubbed... URL: