similar to: ZFS RaidZ recommendation

I currently have a 7x1.5tb raidz1. I want to add "phase 2" which is another 7x1.5tb raidz1 Can I add the second phase to the first phase and basically have two raid5''s striped (in raid terms?) Yes, I probably should upgrade the zpool format too. Currently running snv_104. Also should upgrade to 110. If that is possible, would anyone happen to have the simple command lines to

Hi, i''m new to the list so please bare with me. This isn''t an OpenSolaris related problem but i hope it''s still the right list to post to. I''m on the way to move a backup server to using zfs based storage, but i don''t want to spend too much drives to parity (the 16 drives are attached to a 3ware raid controller so i could also just use raid6 there). I

Which consumer-priced 1.5TB drives do people currently recommend? I had zero read/write/checksum errors so far in 2 years with my trusty old Western Digital WD7500AAKS drives, but now I want to upgrade to a new set of drives that are big, reliable and cheap. As of Jan 2010 it seems the price sweet spot is the 1.5TB drives. As I had a lot of success with Western Digital drives I thought I would

Hi all I have a test system with snv134 and 8x2TB drives in RAIDz2 and currently no Zil or L2ARC. I noticed the I/O speed to NFS shares on the testpool drops to something hardly usable while scrubbing the pool. How can I address this? Will adding Zil or L2ARC help? Is it possible to tune down scrub''s priority somehow? Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at

I?ve spend a few hours reading through the forums and wiki and honestly my head is spinning. I have been trying to study up on either buying or building a box that would allow me to add drives of varying sizes/speeds/brands (adding more later etc) and still be able to use the full space of drives (minus parity? [not sure if I got the terminology right]) with redundancy. I have found the ?all in

The time has come to expand my OpenSolaris NAS. Right now I have 6 1TB Samsung Spinpoints in a Raidz2 configuration. I also have a mirrored root pool. The Raidz2 configuration should be for my most critical data - but right now it is holding everything so I need to add some more pools and move some data around. To start I need a vdev I will call "temp" that acts as a networked bit

The default blocksize is 128K. If you are using mirrors, then each block on disk will be 128K whenever possible. But if you''re using raidzN with a capacity of M disks (M disks useful capacity + N disks redundancy) then the block size on each individual disk will be 128K / M. Right? This is one of the reasons the raidzN resilver code is inefficient. Since you end up waiting for the

Hello, I''m working with someone who replaced a failed 1TB drive (50% utilized), on an X4540 running OS build 134, and I think something must be wrong. Last Tuesday afternoon, zpool status reported: scrub: resilver in progress for 306h0m, 63.87% done, 173h7m to go and a week being 168 hours, that put completion at sometime tomorrow night. However, he just reported zpool status shows:

While thinking about ZFS as the next generation filesystem without limits I am wondering if the real world is ready for this kind of incredible technology ... I''m actually speaking of hardware :) ZFS can handle a lot of devices. Once in the import bug (http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6761786) is fixed it should be able to handle a lot of disks. I want to

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

Hi all, I would like to knwon if with ZFS it''s possible to do something like that : http://tldp.org/HOWTO/LVM-HOWTO/removeadisk.html meaning : I have a zpool with 48 disks with 4 raidz2 (12 disk). Inside those 48 disk I''ve 36x 3T and 12 x 2T. Can I buy new 12x4 To disk put in the server, add in the zpool, ask zpool to migrate all data on those 12 old disk on the new and

I''m building another 24-bay rackmount storage server, and I''m considering what drives to put in the bays. My chassis is a Supermicro SC846A, so the backplane supports SAS or SATA; my controllers are LSI3081E, again supporting SAS or SATA. Looking at drives, Seagate offers an enterprise (Constellation) 2TB 7200RPM drive in both SAS and SATA configurations; the SAS model offers

Hi. I installed solaris express developer edition (b79) on a supermicro quad-core harpertown E5405 with 8 GB ram and two internal sata-drives. I installed solaris onto one of the internal drives. I added an areca arc-1680 sas-controller and configured it in jbod-mode. I attached an external sas-cabinet with 16 sas-drives 1 TB (931 binary GB). I created a raidz2-pool with ten disks and one spare.

Hi list, Here''s my case : pool: mypool state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scrub: resilver in progress for 147h19m, 100.00% done, 0h0m to go config: NAME STATE READ WRITE CKSUM filerbackup13

I''d like to replace/upgrade two 500GB disks in RaidZ2 vdev with 1TB disks, but I have some preliminary questions/concerns before trying ''zfs replace dpool ?'' Will ZFS permit this replacement? Will ZFS use the extra space in a heterogeneous RaidZ2 vdev, or is the size limited by the smallest disk in the vdev? Thanks in advance, Vizzini The system is currently running

Is there any way to stop a resilver? We gotta stop this thing - at minimum, completion time is 300,000 hours, and maximum is in the millions. Raidz2 array, so it has the redundancy, we just need to get data off. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/zfs-discuss/attachments/20100929/9dbb6cf5/attachment.html>

I''m a fan of ZFS since I''ve read about it last year. Now I''m on the way to build a home fileserver and I''m thinking to go with Opensolaris and eventually ZFS!! Apart from the other components, the main problem is to choose the motherboard. The offer is incredibly high and I''m lost. Minimum requisites should be: - working well with Open Solaris ;-) -

Hi all :) I''ve been wanting to make the switch from XFS over RAID5 to ZFS/RAIDZ2 for some time now, ever since I read about ZFS the first time. Absolutely amazing beast! I''ve built my own little hobby server at home and have a boatload of disks in different sizes that I''ve been using together to build a RAID5 array on Linux using mdadm in two layers; first layer is

Replacing my current media server with another larger capacity media server. Also switching over to solaris/zfs. Anyhow we have 24 drive capacity. These are for large sequential access (large media files) used by no more than 3 or 5 users at a time. I''m inquiring as to what the best configuration for this is for vdevs. I''m considering the following configurations 4 x x6

I skimmed the archives and found a thread from July earlier this year about RAIDZ expansion. Not adding more RAIDZ stripes to a pool, but adding more drives to the stripe itself. I''m wondering if an RFE has been submitted for this and if any progress has been made, or is expected? I find myself out of space on my current RAID5 setup and would love to flip over to a ZFS raidz2 solution